• Journal of information and communication convergence engineering
• /
• v.18 no.4
• /
• pp.254-259
• /
• 2020

Phased-array antennas comprise a demanding antenna design methodology for commercial wireless communication systems or military radar systems. In addition to these two important applications, the phased-array antennas can be used in beamforming for wireless charging. In this study, a four-way analog beamforming front-end module (FEM) for a hybrid beamforming system is developed for 2.4 GHz operation. In a hybrid beamforming scheme, an analog beamforming FEM in which the phase and amplitude of RF signal can be adjusted between the RF chain and phased-array antenna is required. With the beamforming and beam steering capability of the phased-array antennas, wireless RF power can be transmitted with high directivity to a designated receiver for wireless charging. The four-way analog beamforming FEM has a 32 dB gain dynamic range and a phase shifting range greater than 360°. The maximum output RF power of the four-way analog beamforming FEM is 40 dBm (=10 W) when combined the four individual RF paths are combined.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.38-42
• /
• 2010

This paper shows that beamfoming module deign to adapt smart antenna system in CDMA2000 environments. The designed beamfroming module has been implemented on a general-purpose DSP as a test-bed to confirm the superior performances based on real-time processing. From the various simulation result, it is confirm that beamforming module is provide a superior beampattern in smart antenna system.

• Journal of information and communication convergence engineering
• /
• v.17 no.3
• /
• pp.221-226
• /
• 2019

In this work, a transmitter/receiver front-end module (T/R FEM) with an automatic Tx/Rx switching scheme for a 2.4 GHz microwave power transfer is developed for a retro-reflective beamforming scheme. Recently, research on wireless power transfer techniques has moved to wireless charging systems for mobile devices. Retro-reflective beamforming is a good candidate for tracking the spatial position of a mobile device to be charged. In Tx mode, the T/R FEM generates a minimum of 1 W. It also comprises an amplitude and phase monitoring port for transmitting RF power. In Rx mode, it passes an Rx pilot signal from a mobile device to a digital baseband subsystem to recognize the position of the mobile device. The insertion loss of the Rx signal path is 4.5 dB. The Tx and Rx modes are automatically switched by detecting the Tx input power. This T/R FEM is a design example of T/R FEMs for wireless charging systems based on a retro-reflective beamforming scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.424-434
• /
• 2015

Adaptive beamforming algorithms have been widely used to remove interference and jamming in the phased array radar system. Advances in the field programmable gate array(FPGA) technology now make possible the real time processing of adaptive beamforming (ABF) algorithm. In this paper, the FPGA based real-time implementation method of adaptive beamforming system(beamformer) in the pre-processor module for active electronically scanned array(AESA) radar is proposed. A compact FPGA-based adaptive beamformer is developed using commercial off the shelf(COTS) FPGA board with communication via OpenVPX(Virtual Path Cross-connect) backplane. This beamformer comprises a number of high speed complex processing including QR decomposition & back substitution for matrix inversion and complex vector/matrix calculations. The implemented result shows that the adaptive beamforming patterns through FPGA correspond with results of simulation through Matlab. And also confirms the possibility of application in AESA radar due to the real time processing of ABF algorithm through FPGA.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.784-788
• /
• 2008

In this research, we propose a remote speech input unit, a new method of user-friendly speech input in speech recognition system. We focused the user friendliness on hands-free and microphone independence in speech recognition applications. Our module adopts two algorithms, the automatic speech detection and speech enhancement based on the microphone array-based beamforming method. In the performance evaluation of speech detection, within-200msec accuracy with respect to the manually detected positions is about 97percent under the noise environments of 25dB of the SNR. The microphone array-based speech enhancement using the delay-and-sum beamforming algorithm shows about 6dB of maximum SNR gain over a single microphone and more than 12% of error reduction rate in speech recognition.

• International Journal of Advanced Culture Technology
• /
• v.7 no.4
• /
• pp.236-241
• /
• 2019

This paper will read about a multichannel frequency-modulated continuous wave (FMCW) radar sensor with switching transmit (TX) antennas is developed at W-band. To achieve a high angular resolution, a uniform linear array consisting of 5 switching-TX and 12 receive (RX) antennas is employed with the digital beamforming technique. The overall radar front-end module comprises a W-band transceiver and TX/RX antennas. A multichannel transceiver module consists of 5 up-conversion and 12 down-conversion channels, where one of the TX channels is sequentially switched ON. For developing transmitter, we developed an HPA (high power amplified) MMIC chip for W-band radar system and fabricated a transmitter module using this chip. In order to develop the W-band transmitter, we analyzed the important antenna transition structure from HPA MMIC line to W/G (Waveguide)antenna via M/S(microstrip) and fabricated it with 5 transmission channels. As a result, the output power of the transmitter was within 1 dB of the error range after analysis and measurement under normal temperature and environmental conditions.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.812-819
• /
• 2012

Interference and jamming are becoming increasing concern to a radar system nowdays. AESA(Active Electronically Steered Array) antennas and adaptive beamforming(ABF), in which antenna beam patterns can be modified to reject the interference, offer a potential solution to overcome the problems encountered. In this paper, we've developed a planar active phased array radar system, in which ABF, target detection and tracking algorithm operate in real-time. For the high output power and the low noise figure of the antenna, we've designed the S-band TRMs based on GaN HEMT. For real-time processing, we've used wavelenth division multiplexing technique on fiber optic communication which enables rapid data communication between the antenna and the signal processor. Also, we've implemented the HW and SW architecture of Real-time Signal Processor(RSP) for adaptive beamforming that uses SMI(Sample Matrix Inversion) technique based on MVDR(Minimum Variance Distortionless Response). The performance of this radar system has been verified by near-field and far-field tests.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.413-414
• /
• 2007

Successful speech recognition in noisy environments for intelligent robots depends on the performance of preprocessing elements employed. We propose an architecture that effectively combines adaptive beamforming (ABF) and blind source separation (BSS) algorithms in the spatial domain to avoid permutation ambiguity and heavy computational complexity. We evaluated the structure and assessed its performance with a DSP module. The experimental results of speech recognition test shows that the proposed combined system guarantees high speech recognition rate in the noisy environment and better performance than the ABF and BSS system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.55-57
• /
• 2022

In this study, a customized semi-passive RFID receiver module was implemented for in-VIVO deep tissue photo-therapy. A novel wireless technique is required due to a limitation of RF communication in body environment, as internal body has a complex structure such as, skin, fat, skeleton, water, and so on. Recently, coherently incoherent beamforming (CIB) based on RFID was introduced and it is able to transmit wireless signal with high reliability under the incoherent condition such as in-VIVO deep tissue. The proposed miniature photo capsule based on RFID consists of miniature controller, ultra small LED array and wireless RFID chip. RF Reader can access with standard RFID protocol (ISO 18000-6c) using UHF RFID antenna, a control command is wirelessly writtern on USER Bank memory. With received control command, therapy LED array dims with mulilevel under timer control. The signal process of designed RFID photo therapy capsule is analyzed and evaluated under the various environments in detailed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.468-472
• /
• 2000

This paper discusses the development of a acoustic vector channel simulator for the performance analysis of a acoustic digital communication system. The channel simulator consists of transmission module, acoustic channel model, receiver, beamformer, and adaptive equalizer. QPSK source signal is generated by the parameters specified by a user and transmitted. The transmitted signal generate multipath signals which have a different delay, amplitude, and dopper Sequency. The multipath signals with the acoustic noises is the received signal. We can analysis the communication system performance according to the antenna structure, beamforming algorithm, and equalization algorithm.