• 한국멀티미디어학회논문지
• /
• 제5권5호
• /
• pp.582-589
• /
• 2002

본 논문에서는 임의의 안테나 배열 수신기 알고리즘에 의해 형성된 빔에 연속 간섭 제거 다중 사용자 검출기를 결합하여 수신기의 성능을 향상시키는 방법을 제안하고, 그 성능을 분석 한다. 안테나 배열 수신기는 사용자들의 신호를 공간적으로 분리하여 다중 사용자 간섭을 감소시켜 각 사용자에 대한 수신 성능을 향상시킬 수 있다. 그러나 형성된 빔에 사용자들이 작은 도래각 차이를 두고 집중 분포될 경우 그 성능이 저하된다. DS/CDMA시스템에서의 다중 사용자 검출기를 위한 간섭 제거 수신기는 간단한 구조와 방법에 비하여 성능이 우수하여 그와 관련된 방식이 많이 제안되어왔다. 본 논문에서는 그러한 성능 저하를 연속 간섭 제거 다중 사용자 검출기를 결합하여 극복하는 방법을 보인다.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.115-120
• /
• 2012

In multi-user multi-input multi-output (MU-MIMO) system, zero forcing beamforming (ZFB) is regarded as a realistic solution for transmitting scheme due to its low complexity and simple structure. However, ZFB shows a significant performance degradation when channel matrix has large condition number. In this case, the largest singular value of the channel inversion matrix has a dominant effect on transmit power. In this paper, we propose a perturbation method for reducing an effect of the dominant singular value. In the proposed algorithm, channel inverse matrix is first decomposed by SVD for the transmit signal to be expressed as a combination of singular vectors. Then, the transmit signal is perturbed to reduce the coefficient of the singular vector corresponding to the largest singular value. When a number of transmit antennas is 4, the simulation results of this paper shows that the proposed method shows 8dB performance enhancement at 10-3 uncoded bit error rate (BER) compared with conventional ZFB. Also, the simulation results show that the proposed method provides a comparable performance to Tomlinson-Harashima Precoding (THP) with much lower complexity.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1578-1581
• /
• 2002

In this paper, the accuracy of the direction-of-arrival (DOA) estimation of signal impinged on the uniform linear array (ULA) is investigated. The conventional beamformer and Capon’s beamformer categorized in beamformaing techniques as well as MUSIC (MUlti-pie Signal Classification) and ESPRIT (Estimation of Signal Invariance Techniques) categorized in subspace- based methods are employed to estimate the DOAs. From the simulation result under uncorrelated environment, MUSIC can prominently distinguish the DOAs while the beamforming techniques cannot demonstrate the DOAs as clear as MUSIC does. Moreover, Uni-tary ESPRIT is employed to estimate the DOAs under uncorrelated signal conditions. By means of Uni-tary ESPRIT, the estimation has more accuracy with the computational-time reduction. In addition, it incorporates forward-backward averaging; thus Unitary ES-PRIT can overcome the problem of the coherent signal condition.

• ETRI Journal
• /
• 제33권2호
• /
• pp.184-193
• /
• 2011

Tailored for wireless local area networks, the present paper proposes a cross-layer resource allocation scheme for multiple-input multiple-output orthogonal frequency-division multiplexing systems. Our cross-layer resource allocation scheme consists of three stages. Firstly, the condition of sharing the subchannel by more than one user is studied. Secondly, the subchannel allocation policy which depends on the data packets' lengths and the admissible combination of users per subchannel is proposed. Finally, the bits and corresponding power are allocated to users based on a greedy algorithm and the data packets' lengths. The analysis and simulation results demonstrate that our proposed scheme not only achieves significant improvement in system throughput and average packet delay compared with conventional schemes but also has low computational complexity.

• 한국음향학회지
• /
• 제32권3호
• /
• pp.237-246
• /
• 2013

본 논문에서는 캐비테이션 터널에서의 소음계측용 청음기 배열 설계를 위한 최적화 기법을 제안하였다. 제안된 최적설계 기법은 배열 설계인자 및 목적함수 정의 그리고 최적화 알고리즘 적용 등의 내용으로 구성되어 있다. 설계인자 정의는 원형배열, 나선배열, 다중나선배열을 대상으로 하였다. 목적함수는 주엽의 빔폭과 최대 부엽 크기를 동시에 고려할 수 있도록 정의하였다. 최적화 알고리즘으로는 광역 최적화 기법의 일종인 VFSR 기법을 적용하였다. 최적 설계기법을 각 배열에 적용 후 도출된 최적 배열을 대상으로 최대 부엽크기 및 주엽의 빔폭을 분석하였다. 끝으로 캐비테이션 터널 내부의 다중반사를 고려한 빔형성 결과 평가를 통해 본 기법의 유용성을 확인하였다.

• Journal of Communications and Networks
• /
• 제18권2호
• /
• pp.173-181
• /
• 2016

In this paper, we address a new robust optimization problem in a multiuser multiple-input single-output broadcasting system with simultaneous wireless information and power transmission, where a multi-antenna base station (BS) sends energy and information simultaneously to multiple users equipped with a single antenna. Assuming that perfect channel-state information (CSI) for all channels is not available at the BS, the uncertainty of the CSI is modeled by an Euclidean ball-shaped uncertainty set. To optimally design transmit beamforming weights and receive power splitting, an average total transmit power minimization problem is investigated subject to the individual harvested power constraint and the received signal-to-interference-plus-noise ratio constraint at each user. Due to the channel uncertainty, the original problem becomes a homogeneous quadratically constrained quadratic problem, which is NP-hard. The original design problem is reformulated to a relaxed semidefinite program, and then two different approaches based on convex programming are proposed, which can be solved efficiently by the interior point algorithm. Numerical results are provided to validate the robustness of the proposed algorithms.

• 한국통신학회논문지
• /
• 제34권2A호
• /
• pp.139-146
• /
• 2009

본 논문은 TDD(Time Division Duplex) 배열안테나 시스템에서 빔형성을 할 때와 송신 전력을 할당하는 경우에 필요한 송수신 RF 단의 진폭과 위상 오차를 교정하는 평균자동내부순환교정 방법을 제안한다. 제안된 기술은 기존의 부가적인 내부 신호발생기나 외부의 기준신호를 필요로 하지 않으며 송수신기 내부의 스위치와 커플러를 이용하여 배열안테나 RF단을 교정할 수 있는 방법이다. 또한 한 개의 송수신 RF단을 사용한 교정에 의한 오차를 줄이기 위해서 평균송수신 RF단 교정 방법을 제안하였다. 전산모의실험을 통해 DOA(Direction of Arrival)추정 빔형성 알고리즘이 송수신 RF단 교정에 의해 정확한 빔형성이 되는 것을 보였고 송신 전력 할 당시에도 제안된 교정에 의해 비트오류율이 낮아짐을 보였다.

• Smart Structures and Systems
• /
• 제24권2호
• /
• pp.173-182
• /
• 2019

Due to the degradation of beamforming properties at angles close to $0^{\circ}$ to $180^{\circ}$, linear array does not have a complete $180^{\circ}$ inspection range but a smaller one. This paper develops a improved sensor array with two additional sensors above and below the linear sensor array, and presents time difference and two dimensional multiple signal classification (2D-MUSIC) based impact localization for omni-directional localization on composite structures. Firstly, the arrival times of impact signal observed by two additional sensors are determined using the wavelet transform and compared, and the direction range of impact source can be decided in general, $0^{\circ}$ to $180^{\circ}$ or $180^{\circ}$ to $360^{\circ}$. And then, 2D-MUSIC based spatial spectrum formula using uniform linear array is applied for locate accurate position of impact source. When the arrival time of impact signal observed by two additional sensors is equal, the direction of impact source can be located at $0^{\circ}$ or $180^{\circ}$ by comparing the first and last sensor of linear array. And then the distance is estimated by time difference algorithm. To verify the proposed approach, it is applied to a quasi-isotropic epoxy laminate plate and a stiffened composite panel. The results are in good agreement with the actual impact occurring position.

• ETRI Journal
• /
• 제41권4호
• /
• pp.536-548
• /
• 2019

In this study, an electronically steerable parasitic array radiator (ESPAR) antenna via analog radio frequency (RF) switches for a single RF chain MIMO system is presented. The proposed antenna elements are spaced at ${\lambda}/64$, and the antenna size is miniaturized via a dielectric radome. The optimum reactance load value is calculated via the beamforming load search algorithm. A switch simplifies the design and implementation of the reactance loads and does not require additional complex antenna matching circuits. The measured impedance bandwidth of the proposed ESPAR antenna is 1,500 MHz (1.75 GHz-3.25 GHz). The proposed antenna exhibits a beam pattern that is reconfigurable at 2.48 GHz due to changes in the reactance value, and the measured peak antenna gain is 4.8 dBi. The reception performance is measured by using a $4{\times}4$ BPSK signal. The measured average SNR is 17 dB when using the proposed ESPAR antenna as a transmitter, and the average SNR is 16.7 dB when using a four-conventional monopole antenna.

• 한국군사과학기술학회지
• /
• 제24권1호
• /
• pp.41-49
• /
• 2021

In electronic warfare, beamforming using multiple antennas is applied for effective transmission of electronic attack signals. In order to perform an electronic attack against multiple threats using the same frequency resource, it is necessary to apply a multi-beam transmission algorithm that has been studied in wireless communication systems. For electronic attacks against multiple threats, this paper presents an MMSE(Minimum Mean-Squared Error) beam-forming technique based on the prior location information of threats and an optimization method for power allocation. In addition, the performance of the proposed method is evaluated and received signals of multiple threats are compared and analyzed.