• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.253-258
• /
• 2000

Recently, the area of design optimization, especially structural optimization, has been and to be a continuous active area of research. And the design optimizations of port facilities have been achieved by many other civil engineers. But the design optimization of port facilities were limited to the design optimization of the breasting dolphin. This paper invested the design optimization of mooring pier and the foundations of mooring pier was suggested considering the convenience of repair and reinforcement work. The mooring pier devised with prestressed precast concrete panel and rigid frame welded wide flange beam to steel pipe pile. To accomplish the design optimization of mooring pier, the Augmented Lagrangian Multiplier Method(ALM) of ADS(Garret N. Vanderplaats) optimization routine, BFGS method as optimizer and Golden Section Method as one dimensional search were utilized. As a result, thirty percent of material cost for construction was reduced by design optimization. The tensile stress of concrete panel and bottom flage was critical constraints under service load. So, using high strength concrete and steel will be economical. And lots of initial values must be invested to accomplish the design optimization in design procedures.

• 한국항해학회지
• /
• 제12권2호
• /
• pp.68-101
• /
• 1988

In spite of the widespread use of stiffend plates in ship structures, it is very difficult to analysis these directly. So, in conventional analysis of plate structures, above structures are used to be idealized as orthotropic plate or grillage structures. Lately, the development of large computers, it is able to apply the optimum techniques to structural design. In this paper, the double bottom structure of Bulk Carrier was idealized into flat grillage which is composed of intersecting beam stiffencers primarily loaded mormal to its surface. And strength analysis was carried out by using the finite element method based on displacement. And further, according to variation of floor space and double tobbon heightm, the optimum design was carrid out by using Hooke and Jeeves direct search method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.370-373
• /
• 2003

A search for a new phosphor composition of excellent performance in systematic ways requires lots of research efforts, and often turns out to be very timeconsuming and difficult. Thus, usually practical ways are taken to improve the performance of phosphors. A few examples of practical surface treatments on phosphors such as $In_2O_3$ coating on $ZnGa_2O_4:Mn$, phosphoric acid treatment on ZnS:Ag,Cl, and base KOH treatment with ultrasonication on ZnS:Ag,Cl are presented. The reasons for the improvement of luminescence intensity or degradation properties after these treatments are discussed based upon careful analyses on the surface of the phosphors and a proposed model on charge carriers generated by electron beam excitation.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.9-12
• /
• 2000

컨테이너 터미널에서 효율적인 적하작업 계획을 자동으로 생성하는 알고리즘을 연구하였다. 실제 터미널에서 계획자들이 적하작업 계획시에 고려하는 제약소건 및 효율적인 계획을 위한 고려사항을 조사하였다. 이를 바탕으로 1단계에서는 개미시스템(ant system)이라는 인공지능기법을 적용하여 제약조건을 만족시키면서 원활한 적하작업이 진행될 수 있도록 컨테이너 크레인과 트랜스퍼 크레인의 이동순서와 위치를 결정하고, 2단계에서는 1단계에서의 결과를 바탕으로 빔탐색법(beam search)을 사용하여 컨테이너 개개의 작업순서를 결정하는 알고리즘을 개발하였다. 또한 개발된 시스템의 성능을 검증하기 위하여 최근의 대형선반에 대한 실제 현장자료를 바탕으로 실험을 수행하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.963-968
• /
• 2006

The main purpose of this paper is to investigate the stability of water tower with a relatively small footing. The water tower is modeled that the column carrying a container is supported by a rotational spring at the base and is of constant cross-section, with a weight per unit length of column axis. The column model is based on the Bernoulli-Euler beam theory. The Runge-Kutta method and Determinant Search method are used to perform the integration of the governing differential equation and to determine the critical values(critical own weight. and critical buckling load), respectively. The critical buckling loads are calculated over a range of system parameters: the rotational stiffness parameter, the dimensionless radius of container and the own weight parameter of the column. The relation between the rotational stiffness parameter and the critical own weight parameter of the column is analyzed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.712-717
• /
• 2000

The main purpose of this paper is to present both the fundamental and some higher natural frequencies of axially loaded Timoshenko beams resting on the elastic foundation. The non-dimensional differential equation governing the free vibrations of such beam is derived in which the effects of rotatory inertia and shear deformation are included. The Improved Euler method and Determinant Search method are used to perform the integration of the differential equation and to determine the natural frequencies, respectively. The hinged-hinged, hinged-clamped and clamped-clamped end constraints are applied in numerical examples. The relations between frequency parameters and both the foundation parameter and slenderness ratio are presented in figures. The effect of cross-sectional shapes is also investigated.

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.183-201
• /
• 2016

Perforated steel beams can be optimised by increased beam depth and the moment of inertia combined with a reduced web thickness, favouring the use of original I-section beams. The designers are often confronted with situations where optimisation cannot be carried out effectively, taking account of the buckling risk at web posts, moment-shear transfers and local plastic deformations on the transverse holes of the openings. The purpose of this study is to suggest solutions for reducing these failure risks of tested optimal designed beams under applying loads in a self-reacting frame. The design method for the beams is the hunting search optimisation technique, and the design constraints are implemented from BS 5950 provisions. Therefore, I have aimed to explore the strengthening effects of reinforced openings with ring stiffeners, welded vertical simple plates on the web posts and horizontal plates around the openings on the ultimate load carrying capacities of optimally designed perforated steel beams. Test results have shown that compared to lateral stiffeners, ring and vertical stiffeners significantly increase the loadcarrying capacity of perforated steel beams.

• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.454-467
• /
• 2002

It has been established that a crack has an important effect on the dynamic behavior of a structure. This effect depends mainly on the location and depth of the crack. Toidentifythelocation and depth of a crack in a structure, a method is presented in this paper which uses neuro-fuzzy-evolutionary technique, that is, Adaptive-Network-based Fuzzy Inference System (ANFIS) solved via hybrid learning algorithm (the back-propagation gradient descent and the least-squares method) and Continuous Evolutionary Algorithms (CEAs) solving sir ale objective optimization problems with a continuous function and continuous search space efficiently are unified. With this ANFIS and CEAs, it is possible to formulate the inverse problem. ANFIS is used to obtain the input(the location and depth of a crack) - output(the structural Eigenfrequencies) relation of the structural system. CEAs are used to identify the crack location and depth by minimizing the difference from the measured frequencies. We have tried this new idea on beam structures and the results are promising.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.163-170
• /
• 1997

The present paper describes an investigation into the application of the genetic algorithm(GA) in the optimization of structural design. Stochastic processes generate an initial population of designs and then apply principles of natural selection/survival of the fittest to improve the designs. The five test functions are used to verify the robustness and reliability of GA, and as a numerical example, minimum weight of a cantilever composite laminated beam with a mix of continuous, integer and discrete design variables is obtained by using GA with exterior penalty function method. The design problem has constraints on strength, displacements, and natural frequencies, and is formulated to a multidimensional nonlinear form. From the results, it is found that the GA search technique is very effective at finding the good optimum solution as well as has higher robustness.

• ETRI Journal
• /
• 제33권3호
• /
• pp.434-442
• /
• 2011

This paper presents a practical differential fault analysis method for the faulty Advanced Encryption Standard (AES) with a reduced round by means of a semi-invasive fault injection. To verify our proposal, we implement the AES software on the ATmega128 microcontroller as recommended in the standard document FIPS 197. We reduce the number of rounds using a laser beam injection in the experiment. To deduce the initial round key, we perform an exhaustive search for possible key bytes associated with faulty ciphertexts. Based on the simulation result, our proposal extracts the AES 128-bit secret key in less than 10 hours with 10 pairs of plaintext and faulty ciphertext.