• 한국소음진동공학회논문집
• /
• 제20권1호
• /
• pp.83-91
• /
• 2010

In this paper, the feasibility of the cost function having two control factors were discussed in compared to two others which has one different control factor respectively. As of the control factors, the dynamic response of a discrete system and the vibrational intensity at the reference point which is the connecting point of a discrete system to a flexible beam were controlled actively by the control force obtained from the minimization of the cost function. The method of feedforward control was employed for the control strategy. The reduction levels of the dynamic response of a discrete system and the vibrational intensity at a reference point, and also the input power induced by the control force were evaluated numerically in cases of the three different cost functions. In comparison with the results obtained from the cost functions of one control factor, which is the dynamic response or the vibrational intensity, in most cases of the cost function of two control factors the better or similar results were obtained. As a conclusion, it is surely noted that both the dynamic response and the vibrational intensity of the vibrating system be controlled up to the expected level by using the single cost function having two control factors.

• 한국의학물리학회지:의학물리
• /
• 제1권1호
• /
• pp.23-29
• /
• 1990

In order to explane the stereotactic procedure, the three steps of the procedure (target localization, dose planning, and radiation treatment) must be examined separately. The ultimate accuracy of the full procedure is dependent on each of these steps and on the consistancy of the approach The concern in this article was about dose planning, which is a important factor to the success of radiation treatment. The major factor in dose planning is a dosimetry system to evaluate the dose delivered to the target and normal tissues in the patient, while it generates an optimal dose distribution that will satisfy a set of clinical criteria for the patient. A three-dimensional treatment planning program is a prerequisite for treatment plan optimization. It must cover 3-D methods for representing the patient, the dose distributions, and beam settings. The major problems and possible modelings about 3-D factors and optimization technique were discussed to simplify and solve the problems associatied with 3-D optimization, with relative ease and efficiency. These modification can simplify the optimization problem while saving time, and can be used to develop reference dose planning system to prepare standard guideline for the selection of optimum beam parameters, such as the target position, collimator size, arc spacing, the variation in arc length and weight. The method yields good results which can then be simulated and tailored to the individual case. The procedure needed for dose planning in stereotactic radiosurgery is shown in figure 1.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1547-1556
• /
• 2000

In this paper, an evaluation method of fracture toughness to apply interfacial fracture mechanics was investigated in adhesively bonded double-cantilever beam (DCB) joints. Four types of adhesively bonded DCB joints with an interface crack were prepared for analyses of the stress intensity factors using boundary element method(BEM) and the fracture toughness test. From the results of BEM analysis and fracture toughness experiments, it is found that the stress intensity factor, K1 is a parameter driving the fracture of adhesively bonded joints. Also, the evaluation method of fracture toughness by separated stress intensity factors of mixed mode cracks was proposed and the influences of mode components for its fracture toughness are investigated in adhesively bonded DCB joints.

• Steel and Composite Structures
• /
• 제13권4호
• /
• pp.327-341
• /
• 2012

With the advantages of large span, light deadweight and convenient construction, the steel-concrete composite beam (SCCB) has been rapidly developed as a medium span bridge. Compared with common beams, the global stiffness of SCCB is discontinuous and in a staged distribution. In this paper, the analysis model for the simply-supported SCCB is established and the vibration equations are derived. The natural vibration characteristics of a simply-supported SCCB are analyzed, and are compared with the theoretical and experimental results. A curvature mode measurement method is proposed to identify the shear connector damage of SCCB, with the stiffness reduction factor to describe the variation of shear connection stiffness. By analysis on the $1^{st}$ to $3^{rd}$ vertical modes, the distribution of shear connectors between the steel girder and the concrete slab are well identified, and the damage locations and failure degrees are detected. The results show that the curvature modes can be used for identification of the damage location.

• 한국광학회지
• /
• 제9권3호
• /
• pp.186-190
• /
• 1998

직경이 10mm인 유리관의 외벽을 금으로 코팅하여 반사체로 사용되고 최대 출력이 140W인 레이저 다이오드바 (laser diode bar) 3개를 여기 광원으로 이용한 고출력 Nd:YAG 레이저를 설계 제작하였다. 레이저봉의 지름은 6mmdlqu 길이는 130mm이다. 투과율이 11%인 출력경과 전반사경을 사경하여 선형공진기를 구성하고 연속발전시켰을 때 약 130W의 Nd:YNG 레이저 연속출력을 얻었으며 이 때 측정된 기울기 43%, 광변환 효율은 31%에 도달하였다. 레이저빔의 빔질인자(beam quality factor)M2는 최대 다이오드 츨력에서 약85로 관측되었으며 레이저 발진시에 측정한 열렌즈 초점거리의 역수와 여기광의 출력비는 5.3∼7.4D/kWpump 이었다.

• 대한전기학회논문지
• /
• 제36권10호
• /
• pp.741-747
• /
• 1987

The high-power Nd:glass system with five-stage amplifier was designed and its amplification characteristics was studied for developing high-power Nd:glass laser system as an energy driver of inertial confinement fusion(ICF). In order to study the amplification characteristics of remporal and spacial Gaussian laser beam, the dependence of them on pumping efficiency and rod loss were studied and discussed. The output energy of this system using phosphate Nd glass rod(LHG-7,LHG-8) and silicate Nd glass rod(LSG-91H), respectively, was calculated by the computer simulation using Avizonis-Grotbeck and Frantz Nodvik equations. As results of this simulation, it was found that the shorter the risetime of laser pulse, the larger the amplification factor and that the larger peak value of laser pulse, the lower the amplification factor. The output inergies of 179J, 344J, and 7J were obtained by the designed five-stage amplified high-power Nd:glass laser system using glass rods of LHG-7,LHG-8, and LSG-91H, respectively. From the results it was found that the laser system using the LHG-8 glass rod was the most excellent one among the systems and the cross section for stimulated emission of the gain coefficient was essentially important parameter for the amplification characteristics.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.145-148
• /
• 2008

현재 국제적인 콘크리트설계기준의 동향은 한계상태의 개념을 기본으로 하여 구조물에 요구되는 성능을 중심으로 새로이 한계상태를 정의하려는 노력이 진행되고 있다. 이를 위해서는 구조물의 요구성능을 정의하고 성능수준에 대한 만족도를 측정하는 등의 과제를 해결해야 하는 문제가 놓여있다. 성능을 만족하는 정도를 나타낼 수 있는 지수로는 현재 신뢰도지수가 가장 주목받고 있다. 이 논문에서는 PSC beam을 대상으로 단면력저항계수 및 재료저항계수 체계로 설계를 시행한 후, 여러가지의 서로 다른 저항계수 세트에 대한 신뢰도지수를 각각 구하여 값을 비교하였다. 향후 주어진 목표신뢰도 수준에 부합하는 저항계수 조합을 산정하는 기초 자료로 사용할 수 있다.

• Composites Research
• /
• 제12권2호
• /
• pp.1-9
• /
• 1999

외부 회로가 연결된 압전 재료는 외부 회로의 영향으로 진동수에 영향을 받는 강성(stiffness)과 손실 계수(loss factor)를 가지게 된다. 일반적으로 외부 회로는 두 종류로 구별이 된다. 저항만으로 구성된 경우와 저항과 인덕터(inductor)로 구성된 경우이다. 저항만으로 구성된 경우를 RES(resistive shunting)라 하는데, 이 경우는 압전 재료의 물성이 점탄성 물질과 비슷하게 진동수에 영향을 받는다. 그러나 점탄성 물질에 비해서 더 큰 강성을 지니고, 온도에 영향을 덜 받는다. 저항과 인덕터로 구성된 경우를 RSP(resonant circuit shunting)라 하는데, PMD(proof mass damper)와 비슷한 방법으로 구조물의 공진을 최적으로 조절할 수 있다. 본 논문에서는 이러한 외부 회로와 연결된 압전 재료를 이용하여 복합재 보의 진동을 수동적으로 제어하는 실험을 수행하여 그 결과를 제시하였다.

• Steel and Composite Structures
• /
• 제18권3호
• /
• pp.565-582
• /
• 2015

This paper is concerned with the dynamic analysis of simply-supported steel-concrete composite beams under moving loads. Considering the interface slip between steel girder and concrete slab, the governing motion equations are derived from the direct balanced method. By variable separation approach, the analytical solution of natural frequencies and mode shapes are obtained, as well as the orthogonal conditions. Then the dynamic responses of the composite beam under moving loads are analyzed, and compared with the experimental results. The analysis results show that the governing motion equations become more complicated when interface slip is taken into account, and the dynamic behaviors are significantly influenced by the shear connection stiffness. In the dynamic calculation of composite beams, the global stiffness should not be reduced as the same factor to all orders, but as different ones according to the dynamic stiffness reduction factor (DSRF), to which should be paid more attention in calculation, design and experiment, or else great deviation is inevitable.

• Imaging Science in Dentistry
• /
• 제52권3호
• /
• pp.289-294
• /
• 2022

Purpose: This study aimed to evaluate the diagnostic performance of panoramic images compared to cone-beam computed tomography (CBCT) imaging for maxillary third molar (M3)-associated external root resorption (ERR), and to identify the risk factors of ERR on panoramic images. Materials and Methods: The study population was composed of all patients who underwent panoramic imaging at Dankook University Dental Hospital from May to October 2019. In total, 397 cases of maxillary M3s in 247 patients(147 men and 100 women) were included. The diagnostic accuracy of ERR in panoramic images compared to CBCT images was evaluated using the chi-square test. To identify risk factors for ERR, dental records and panoramic findings were evaluated by logistic regression analysis. Results: The diagnostic accuracy of ERR on panoramic images was 0.79 compared to CBCT images (P<0.05). Superimposition of M3s onto second molars (M2) was associated with an approximately 33 times higher risk of ERR than separated M3s(P<0.05). Impacted M3s showed a 5 times higher risk of ERR than erupted M3s(P<0.05). Conclusion: ERR related to M3s is a common clinical condition, and superimposition of M3 onto M2 on panoramic images was the most important risk factor for ERR. It seemed that CBCT examinations for maxillary M3s might be indicated for ERR diagnosis especially if panoramic radiographs show superimposition of M3 onto M2. Impaction itself was also a risk factor, and it should be carefully examined.