• ETRI Journal
• /
• v.42 no.1
• /
• pp.108-117
• /
• 2020

This study proposes a robust range-only beacon mapping method for registering the locations of range-only beacons automatically. The proposed method deals with the multipath propagation of signals from range-only beacons using the range-only measurement association (RoMA) and an unscented Kalman filter (UKF). The RoMA initially predicts the candidate positions of a range-only beacon. The location of the range-only beacon is then updated using the UKF. With the proposed method, the locations of range-only beacons are accurately estimated in a multipath environment. The proposed method also provides the location uncertainty of each range-only beacon. Simulation results using the model for multipath propagation and experimental results in a real indoor environment verify the performance of the proposed method.

• Journal of Information Technology Services
• /
• v.11 no.4
• /
• pp.195-213
• /
• 2012

In ubiquitous environments, the Intelligent Transportation System (ITS) protocol is a typical service used to improve the quality of life for humans. The Vehicular Ad-hoc Network (VANET) protocol, a part of ITS, needs further study with regards to its support for high reliability, high speed mobility, data transmission efficiency, and so on. The IEEE 802.11 standard provides a high data rate channel, but it was designed for peer-to-peer network protocols. IEEE 802.11p also provides a high data rate channel, however, it only facilitates communication between roadside and on-board equipment. A VANET has characteristics that enable its topology to change rapidly; it can also be expanded to a multi-hop range network during communication. Therefore, the VANET protocol needs a way to infer the current topology information relating to VANET equipped vehicles. In this paper, we present the Multi-Beacon MAC Protocol, and propose a method to resolve the problem of beacon collisions in VANET through the use of this Multi-Beacon MAC protocol. Evaluation of the performance of Multi-Beacon MAC protocol by means of both mathematical analyses and simulation experiments indicate that the proposed method can effectively reduce beacon collisions and improve the throughput and the delay between vehicles in VANET systems.

• Journal of KIISE
• /
• v.43 no.10
• /
• pp.1094-1103
• /
• 2016

Physical Web and Eddystone can be serviced by a single integrated application on the device by using their servers' URL. However, they have a limitation that their servers must be customized for service characteristics on a case by case basis. In other words, regardless of the service selected for BLE, it should have a modified linkage application for each device. Hence, we think that a new integrated service platform, which is able to link and support its Beacon from the central server and is also able to support its application, is needed for achieving better service quality. This platform consists of push (Broadcasting for Beacon service) parts and pull (Connection) parts to establish communication. Especially, Pull should be operated and controlled under the authorization (secure) management for safe and trustable communication. It means that BLE must have its new authorization communications protocol to protect its data as much as possible. In this paper, we propose a BLE integrated authorization protocol for a BLE device control server based on Physical Web and Eddystone.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.287-289
• /
• 2015

Internet of Things(IoT) is promising futuristic technology and the relevant market is expected to grow explosively. So, many company develop the product or service that is applied IoT in various fields. The objective of this paper is design and development of collaboration system for enterprise based on beacon to improve efficiency in office environment. We construct Indoor Positioning System(IPS) that using by beacon and mobile device and then develop the related service that utilize IPS data. Thus, we expect that this study contribute to improving productivity of domestic company, is used widely to develop new IoT service that applying various sensors such as beacon, temperature, humidity and so on.

• Journal of Information Technology Services
• /
• v.14 no.1
• /
• pp.217-236
• /
• 2015

The purpose of this study is to propose the effective location-based IoT service acceptance model by integrating ELM (Elaboration Likelihood Model) with UTAUT (Unified Theory of Acceptance and Use of Technology). The Partial Least Squares was used to analyze the causal relationships with respect to the effects of central route and peripheral route on acceptance intention. The results shows that central route has more significant impacts on perceived usefulness than peripheral route and CFIP (Concern for Information Privacy) weaken the relationship of acceptance intention and perceived usefulness. Our findings indicate some meaningful implications in the acceptance research of IOT services. First, we noted that the easy of use significantly affects the adoption of location-based IoT service. Furthermore, it is important to build the secured mechanism of privacy protection to adopt of location-based IoT service. Second, we tried to attempt the newly integrated approach to technical acceptance using UTAUT's variables and ELM by Petty and Cacioppo (1986). Finally this research empirically analyzed the adoption case of location-based IoT service which is not well-known yet within our country.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.311-317
• /
• 2016

Many services have been developed that are based on smart devices, and security between devices is emphasized. A beacon on the current IoT(Internet of Things) services has been utilized in the commercial field and is being applied to the services of the home IoT. On the other hand, the beacon is weak to security using Bluetooth-based services. Therefore, it is important to strengthen the security of the beacon. This paper proposes a dual security technique that can enhance the security of beacon-based services. The dual security architecture and security process is proposed based on beacon and authentication service. In addition, mobile application was developed and validated based on the beacon for proving the suitability of the proposed technique. The experimental method for verification are the authentication failure case, such as 1st authentication fail, and authentication success case, such as 1st authentication success and 2nd authentication success. The components of the verification experiments consists of two beacons (matched with Beacon ID, mismatched with Beacon ID), one mobile device and authentication application. This was tested to verify the compatibility of the dual security architecture and 1st/2nd authentication process.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.2E
• /
• pp.91-97
• /
• 2002

One of the most important things in mobile phone service is Hand-Off (H/O). Meantime soft H/O and softer H/O have been used between the same generations (2G↔2G) and there is little problem. With user's needs and the development of communication technology, the system with different generation coexists and pilot beacon and time-periodic beacon are used for H/O between generations (2.5G↔2G) to start service, but it is not economic and efficient. To improve such problems, ENHHO developed in April 2001 has recently used. Unfortunately, this method also has the defect of momentary cutoff of communication information during the procedure of H/O in case of more than 5 pilot signals. Accordingly, we suggest algorithm to improve the problem of ENHHO and examines its propriety by analyzing the results of field survey using the algorithm.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.419-426
• /
• 2018

Recently, indoor locating using beacon has gained much attention as an indoor locating technology. This technology has been used for various indoor LBS(location-based services). However, there is a lack of research on LBS service specialized in university yet. In this paper, we designed and implemented a smart LBS system using beacon for campus and class guide in the university. This system provides for campus and class guide services based on the current specific location in the campus, This system can be improved as more precise becon technology is developed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.433-439
• /
• 2010

This paper proposes a beacon color code scheduling algorithm for the localization of multiple robots in a multi-block workspace. With the developments of intelligent robotics and ubiquitous technology, service robots are applicable for the wide area such as airports and train stations where multiple indoor GPS systems are required for the localization of the mobile robots. Indoor localization schemes using ultrasonic sensors have been widely studied due to its cheap price and high accuracy. However, ultrasonic sensors have some shortages of short transmission range and interferences with other ultrasonic signals. In order to use multiple robots in wide workspace concurrently, it is necessary to resolve the interference problem among the multiple robots in the localization process. This paper proposes an indoor localization system for concurrent multiple robots localization in a wide service area which is divided into multi-block for the reliable sensor operation. The beacon color code scheduling algorithm is developed to avoid the signal interferences and to achieve efficient localization with high accuracy and short sampling time. The performance of the proposed localization system is verified through the simulations and the real experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.180-182
• /
• 2021

This paper proposes a method for estimating the location of a user using a beacon to provide a service in an indoor environment. To estimate the location using the beacon, a Gaussian filter was applied to the RSSI value of the beacon, and the distance conversion function was obtained through the filtered RSSI value to estimate the tag location by trilateration. Then, in the indoor space where the beacons are installed, the location estimation accuracy of 8 places where 3 beacons are at a certain distance was confirmed. As a result, it was possible to confirm the position estimation accuracy of ±0.097 standard deviation and 0.242 distance error.