• Food Science and Preservation
• /
• v.21 no.2
• /
• pp.193-198
• /
• 2014

The quality and antioxidative characteristics of drinks prepared with different mixing ratios of black garlic and Oenanthe javanica DC., BD-1 (black garlic only), BD-2 (black garlic:Oenanthe javanica DC.=2:1), BD-3 (black garlic:Oenanthe javanica DC.=1:1), and BD-4 (black garlic:Oenanthe javanica DC.=1:2), were studied. The pH increased with the increasing concentration of Oenanthe javanica DC. extract in all the tested drinks, but the sugar contents decreased. The total polyphenol contents of the drinks were 28.48 ${\mu}g/mL$ (BD-1), 41.91 ${\mu}g/mL$ (BD-2), 42.36 ${\mu}g/mL$ (BD-3), and 46.96 ${\mu}g/mL$ (BD-4). The SOD-like activity was highest for BD-4 (18.60%), followed by BD-3 (15.53%), BD-2 (12.53%), and BD-1 (10.27%). The thiobarbituric acid reactive substances (TBARS) was highest for BD-4 (52.51%), followed by BD-3 (45.70%), BD-2 (39.44%), and BD-1 (28.72%). The ferrous ion chelating activity increased with the increasing concentration of Oenanthe javanica DC extract, and BD-4 showed the best activities among all the tested drinks. The water-soluble vitamin content (vitamins B1, B2, B6, and C) of BD-4 (1197.77 ${\mu}g/mL$) was higher than those of the other drinks (BD-1, 213.02 ${\mu}g/mL$; BD-2, 477.87 ${\mu}g/mL$; BD-3, 914.72 ${\mu}g/mL$), and the vitamin C (806.21 ${\mu}g/mL$) content of the water-soluble vitamins at BD-4 was higher than those of vitamins B1 (68.04 ${\mu}g/mL$), B2 (312.51 ${\mu}g/mL$), and B6 (11.01 ${\mu}g/mL$). BD-4 showed the best score in the sensory evaluations, such as in the evaluation of the color, flavor, taste, and overall acceptability.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.4
• /
• pp.38-46
• /
• 2008

An object of this study is to understand the correlation between the characteristics of an engine performance and combustion characteristics, applying BD20 fuel reformed by ultrasonic energy irradiation to diesel engines. Before conducting the main experiment, an experiment was performed to determine the optimum injection timimg of reformed BD20 by ultrasonic energy irradiation. To control the duration of the ultrasonic energy irradiation, the capacity of an ultrasonic energy fuel supply system was tested with 550cc and 1100cc chambers. As the result of the analysis of the regular BD20 and reformed BD20 by ultrasonic energy irradiation, the BSFC and the Power of the reformed BD20 was improved 3% and 6%, respectively compared to those of non-irradiated BD20. When the fuel injection timing was delayed by $5^{\circ}$, the engine power was improved by 3%, and the BSFC was improved by 2%. The maximum cylinder pressure of reformed BD20 was improved by a maximum of 6% in comparison to that of regular BD20, and demonstrated a synergistic effect of 3% by delaying the injection timing $5^{\circ}$.

• Korean Journal of Plant Resources
• /
• v.31 no.5
• /
• pp.522-530
• /
• 2018

Brachypodium distachyon has been developed as a monocot model plant for temperate grasses and bioenergy crops. Although B. distachyon research is moving forward rapidly, the study of photoresponses has not been explored. To extend our knowledge of responses to light in monocots, we performed photoresponse analysis of B. distachyon using two inbred lines, Bd21 and Bd21-3. In this study, we first compared growing phenotypes between the two lines and investigated coleoptile and primary leaf growths under dark, far-red, red, and white light conditions. The results showed that the growth of the two lines were similar until tillering stage, but other developmental stages from heading to senescence were much delayed in Bd21-3, which resulted in increased height and tiller numbers. Under different light conditions, primary leaf lengths were kept increasing during the growth period, whereas the coleoptile extension was inhibited 4 to 7 days after growth depending on the light conditions applied. These results suggest that the responses to light in B. distachyon can be examined by measuring coleoptile lengths approximately 7 days after seedling growth. Moreover, we selected light-responsive genes known in Arabidopsis thaliana, such as chlorophyll A/B binding protein (CAB), light-harvesting chlorophyll binding protein (Lhcb) and chalcone synthase (CHS), and confirmed their light-induced gene expression in B. distachyon. Therefore, the present study suggests that the inhibition of coleoptile growth can be used as the parameter to analyze photoresponses in the monocot model plant, and also provide the reference genes whose expression is induced by far-red and red light treatment.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.21.2-21.2
• /
• 2011

2010년 11월 05일부터 11월 29일 중 총 12일간 진천 소재 충북대학교 천문대의 60cm 반사망원경과 ST-8 CCD 카메라를 이용하여 BD And의 BVR CCD 측광 관측을 수행하여 처음으로 BVR 광도 곡선을 완성하였다. 또한, 극심시각 결정을 위한 측광관측이 레몬산 천문대 1m 반사망원경과 충북대학교 천문대의 35cm 망원경으로 수행되었다. 우리의 관측과 SWASP 관측을 통하여 모두 31개의 극심시각을 새로이 결정하였다. 새로운 관측은 이 별의 공전주기가 이전까지 알려진 0.4629일이 아니라 그 두 배인 0.9258일이며, 기산점도 반주기 바뀌어야 함을 보여 준다. BD And의 광도요소를 Min I = HJD 2434962.8602 + 0.d9258054 E으로 새롭게 개정하였다. 이 광도요소로 작성한 우리의 BVR 광도곡선은 제1식과 제2식의 깊이가 거의 비슷하며, 식바깥 부분에 잘 발달된 파형 모양을 보인다. 이는 BD And가 짧은 주기의 RS CVn형 식쌍성임을 나타내는 것이다. 우리의 극심시각을 포함한 총 144개의 극심시각에 대한 (O-C)도를 작성한 결과, BD And의 공전주기가 규칙적으로 변화하는 것을 발견하였다. 이 변화를 보이지 않는 제3천체에 의한 광시간 효과로 가정하여, 궤도이심율이 0.78이며, 9.19년의 주기를 가진 광시간 궤도를 결정하였다.우리의 광도곡선을 2003년 Wilson-Devinney 쌍성 모형으로 분석하여 광도곡선 해를 질량비 q=1.1822, 궤도경사각 i=$86.^{\circ}16$, $T_1$=6358(K), $T_2$=6250(K), $r_1$=1.117(Rsun), $r_2$=1.321(Rsun)와 같이 산출하였다. 식바깥에서 나타나는 파형 모양의 변화는 주성의 표면에 매우 큰 흑점으로 잘 설명되며, BVR 광도곡선에서 각각 전체 광도의 각 6.4%, 8.1%, 9.9%에 해당되는 제3 광도가 검출되었다. 이는 주기연구에서 제안된 제3천체의 존재 가능성을 더 공고히 한다.

• Restorative Dentistry and Endodontics
• /
• v.44 no.2
• /
• pp.21.1-21.8
• /
• 2019

Objectives: The purpose of the present study was to evaluate the effect of calcium hydroxide with 2% chlorhexidine gel (HCX) or distilled water (HCA) compared to triple antibiotic paste (TAP) on push-out bond strength and the cement/dentin interface in canals sealed with White MTA Angelus (WMTA) or Biodentine (BD). Materials and Methods: A total of 70 extracted human lower premolars were endodontically prepared and randomly divided into 4 groups according to the intracanal medication, as follows: group 1, HCX; group 2, TAP; group 3, HCA; and group 4, control (without intracanal medication). After 7 days, the medications were removed and the cervical third of the specimens was sectioned into five 1-mm sections. The sections were then sealed with WMTA or BD as a reparative material. After 7 days in 100% humidity, a push-out bond strength test was performed. Elemental analysis was performed at the interface, using energy-dispersive spectroscopy. The data were statistically analyzed using analysis of variance and the Tukey test (p < 0.05). Results: BD presented a higher bond strength than WMTA (p < 0.05). BD or WMTA in canals treated with calcium hydroxide intracanal medications had the highest bond strength values, with a statistically significant difference compared to TAP in the WMTA group (p < 0.05). There were small amounts of phosphorus in samples exposed to triple antibiotic paste, regardless of the coronal sealing. Conclusions: The use of intracanal medications did not affect the bond strength of WMTA and BD, except when TAP was used with WMTA.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.2
• /
• pp.196-204
• /
• 2011

Heat-moisture treatment (HMT) was applied to 4 samples of rice flours, Goami (GM), Taeguk (TG), Choochung (CC) and Koshihikari (KSHK), of which amylose contents were 31.5, 32.3, 24.3, and 23.3%, respectively. Wet-milled rice flours were dried, moisture content adjusted to 21, 24, 27 and 30%, respectively, and autoclaved at 100 and $105^{\circ}C$ for 30~90 min. The changes on swelling, solubility, RVA (rapid visco analyser) paste viscosities and gel strength were observed. In GM and TG, peak viscosity (PV) and breakdown (BD) decreased and no peak appeared as moisture and treatment time increased by HMT. In CC, FV increased notably with big increase of PV and setback (SB) by HMT compared to the other rice flours. BD in all the samples decreased as moisture, temperature, and time increased by HMT. RVA pasting properties of HMT GM and HMT TG were changed remarkably under conditions of moisture 21%, $100^{\circ}C$ and 30 min whereas for HMT CC and HMT KSHK, higher temperature or more time was required at the same mois ture levels. The swelling power, solubility and gel strength increased by HMT. Gel strength correlated positively with SB (r=0.78, p<0.01) and negatively with BD (r=-0.71, p<0.01) and PV (r=-0.36, p<0.05) resulting from strengthening the structure of starch granules in rice flours by HMT.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.318-325
• /
• 2019

This study analyzes current self-nail tips and nail-tip satisfaction. The study method selected from 3 domestic and 3 overseas companies analyzed current self-nail tips based on brand recognition and sales rate. A questionnaire was conducted on 261 adult women in their 20s and 50s about the satisfaction of nail care and self-nail tips. The results are as follows. As a result to analyze the current nail tips, there were products that did not contain the type of nail tip or the composition and ingredients of the glue. An online survey of the sizes of the current nail tips indicated differences in the sizing system method and that the presented sizes are different. The response rate was the highest for the survey results on why self-nail tips were preferred for respondents who prefer self-nail tips because the price was cheap. The reason why they did not prefer self-nail tips was that the degree of completeness was lower and the fitness was not good. In addition, it showed a high response rate in that the adhesive strength was poor and the size did not fit the nails. Therefore, it is necessary to develop a size for nail types by ergonomic design and develop a self-nail tip that can reduce nail damage.

• Restorative Dentistry and Endodontics
• /
• v.48 no.2
• /
• pp.21.1-21.15
• /
• 2023

Objectives: This study evaluated the effects of Biodentine (BD), Bio-C Repair (BCR), and mineral trioxide aggregate (MTA) plug on the fracture resistance of simulated immature teeth with replacement root resorption (RRR) and in vitro-induced osteoclastogenesis. Materials and Methods: Sixty bovine incisors simulating immature teeth and RRR were divided into 5 groups: BD and BCR groups, with samples completely filled with the respective materials; MTA group, which utilized a 3-mm apical MTA plug; RRR group, which received no root canal filling; and normal periodontal ligament (PL) group, which had no RRR and no root canal filling. All the teeth underwent cycling loading, and compression strength testing was performed using a universal testing machine. RAW 264.7 macrophages were treated with 1:16 extracts of BD, BCR, and MTA containing receptor activator of nuclear factor-kappa B ligand (RANKL) for 5 days. RANKL-induced osteoclast differentiation was assessed by staining with tartrate-resistant acid phosphatase. The fracture load and osteoclast number were analyzed using 1-way ANOVA and Tukey's test (α = 0.05). Results: No significant difference in fracture resistance was observed among the groups (p > 0.05). All materials similarly inhibited osteoclastogenesis (p > 0.05), except for BCR, which led to a lower percentage of osteoclasts than did MTA (p < 0.0001). Conclusions: The treatment options for non-vital immature teeth with RRR did not strengthen the teeth and promoted a similar resistance to fractures in all cases. BD, MTA, and BCR showed inhibitory effects on osteoclast differentiation, with BCR yielding improved results compared to the other materials.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.325-343
• /
• 2012

This paper proposes the coding method to predict the split structure of LCU in the current frame on the basis of the reference frame or temporally-previous frame. HEVC encoder determines split structure according to image characteristics in LCU which is an basic element of CU. The split structure of the current LCU is very similar to the split structure of collocated LCU in the reference frame or temporally-previous frame. Thus, this paper proposes the method to reduce the encoder computational complexity by predicting split structure of the current LCU on the basis of that of collocated LCU in the reference frame or temporally-previous frame. And it also proposes the method to reduce the BD-Bitrate by coding after the prediction of the CU split information. The simulation results of changing only encoder showed that the mean of encoder computational complexity was lower by 21.3%, the decoder computational complexity was negligible change and the BD-Bitrate increase by the maximum of 0.6%. Also, the method changing encoder, bitstream, and decoder improves the mean of encoder computational complexity was lower by 22%, the decoder computational complexity was negligible change and the BD-Bitrate is improved to the maximum of 0.3%. When compared with the conventional method, indicating that the proposed method is superior.

• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.10-14
• /
• 2014

Laser aided Direct Metal Tooling(DMT) process is a kind of Additive Manufacturing processes (or 3D-Printing processes), which is developed for using various commercial steel powders such as P20, P21, SUS420, H13, D2 and other non-ferrous metal powders, aluminum alloys, titanium alloys, copper alloys and so on. The DMT process is a versatile process which can be applied to various fields like the mold industry, the medical industry, and the defense industry. Among of them, the application of DMT process to the mold industry is one of the most attractive and practical applications since the conformal cooling channel core of injection molds can be fabricated at the slightly expensive cost by using the hybrid fabrication method of DMT technology compared to the part fabricated with the machining technology. The main objectives of this study are to provide various characteristics of the parts made by DMT process compared to the same parts machined from bulk materials and prove the performance of the injection mold equipped with the conformal cooling channel core which is fabricated by the hybrid method of DMT process.