• Journal of Hydrogen and New Energy
• /
• v.35 no.2
• /
• pp.230-239
• /
• 2024

Efforts are being made to replace ship diesel engines with electric propulsion motors in response to emission regulations. In particular, in the case of short-range small ships, research is being conducted to replace polymer electrolyte membrane fuel cells (PEMFC) with power sources. However, PEMFC has problems such as slow dynamic response characteristics and reduced durability at high temperatures. To solve this problem, a high-precision ship model was developed with power distribution and thermal management strategies applied, and through this, the required power, heat, and power characteristics of the propulsion system according to the ship's speed profile were analyzed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.2
• /
• pp.195-201
• /
• 2015

An electric excavator consumes battery energy to drive an electric motor attached to a hydraulic pump to generate hydraulic power. In a conventional hydraulic excavator, the hydraulic pump is controlled by regulators, which are used to optimize the diesel engine efficiency. Because of a lack of battery energy capacity, an electric excavator controller should consider not only the electric motor efficiency but also the hydraulic pump efficiency. Thus, electric motor and hydraulic pump efficiency maps were constructed. An optimal operating map (OOM) was created based on the most efficient operating points under each input condition. An integrated control algorithm controlled the speed of the electric motor and displacement of the hydraulic pump according to the OOM. To confirm the utility of this algorithm, a model-in-the-loop simulator for the algorithm with an electric excavator was established. The simulation results showed that the integrated control algorithm improved the energy efficiency of an electric excavator.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.327-332
• /
• 2016

The routing protocol for low-power and lossy networks (RPL) is an internet protocol based routing protocol developed and standardized by IETF in 2012 to support a wide range of applications for low-power and lossy-networks (LLNs). In LLNs consisting of resource-constrained devices, the energy consumption of battery powered sensing devices during network operations can greatly impact network lifetime. In the case of inefficient route selection, the energy depletion from even a few nodes in the network can damage network integrity and reliability by creating holes in the network. In this paper, a composite energy-aware node metric ($RER_{BDI}$) is proposed for RPL; this metric uses both the residual energy ratio (RER) of the nodes and their battery discharge index. This composite metric helps avoid overburdening power depleted network nodes during packet routing from the source towards the destination oriented directed acyclic graph root node. Additionally, an objective function is defined for RPL, which combines the node metric $RER_{BDI}$ and the expected transmission count (ETX) link quality metric; this helps to improve the overall network packet delivery ratio. The COOJA simulator is used to evaluate the performance of the proposed scheme. The simulations show encouraging results for the proposed scheme in terms of network lifetime, packet delivery ratio and energy consumption, when compared to the most popular schemes for RPL like ETX, hop-count and RER.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.105-112
• /
• 2022

In this paper, unmanned underwater glider was designed for high-depth operation and adopted a bladder-type buoyancy controller for improving battery efficiency, and the motion controller controls the pitch angle by moving the internal mass battery. To improve the energy efficiency of the unmanned underwater glider, a layered PID controller that performs control by section was designed. Simulation program including 6-DOF motion equations and hydrodynamics coefficients of an unmanned underwater glider is constructed using Matlab/Simulink program. Control methods such as PID controller, sliding mode controller and layered PID controller were applied to the simulator to compare the dynamics performance and energy efficiency. As a result, the layered PID controller showed improved control performance compared to other controllers and improved energy efficiency of approximately 7.2% compared to PID controller.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1189-1194
• /
• 2005

An Ad-hoc network which do not use wired and base station system is composed the group of mobile and wireless nodes. That is various type of restriction. The biggest restriction is depend on the confined energy of battery. The network is devide more than two, if one of nodes consumed all energy that node can no longer participate to network. In recent years, the many number of studies research not only energy saving but also the networks lifetime extension which is to solve this problem. In this paper, we examine a AODV routing protocol which is modified to improve networks lifetime in mobile ad-hoc network. The one of improvement for AODV protocol is maximize the networks lifetime as apply Energy Mean Value algorithm which considerate node energy. We show the effectiveness for modified AODV(New-AODV) compared with AODV using NS-2(Network Simulator 2) the various performance metrics.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.42-50
• /
• 2008

Unlike a cellular network, a mobile ad hoc network(MANET) is constructed only by mobile nodes without access point. Mobile nodes in MANET operate with scarce resources and restricted battery. If battery of intermediate node is exhausted, overall network might be diverged. Therefore, power-aware is really important. An on-demand multipath routing protocol which is proposed to compensate for shortcoming of on-demand single path routing protocol can reduce mute discovery overhead because route discovery starts only when all routes are disconnected. AOMDV(Ad hoc On-demand Multipath Distance Vector) which is on-demand multipath routing protocol based on AODV, reduces 40% of route discovery frequency. However, AOMDV have none of power-aware. So AOMDV have problem that route discovery for power exhaustion is not reduced at all. This paper proposes new power-aware path selection algorithm for AOMDV and scheme that broadcast REER packets when mobile node's battery can be gone. Performance comparison of proposed algorithm with AOMDV using ns-2 simulator shows that route discovery of proposed algorithm is reduced maximally 36.57% than AOMDV's.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.3
• /
• pp.98-105
• /
• 2012

Recently, most of the countries started to regulate the emission of vehicle because of the global warming. The engine scooter is also one of the factor which cause the pollution. The hybrid system of a vehicle has many advantages such as fuel saving and emission reduction. The purpose of this study is to choose optimal size of engine, motor and battery for hybrid scooter system using Dynamic programming. The dynamic programming is an effective method to find an optimal solution for the complicated nonlinear system, which contains various constraints of control variables. The power source size of hybrid scooter was chosen through the backward simulator using dynamic programming. From the analysis, we choose the optimal size of each power source. To verify the optimal size of the power source, the Forward simulation was carried out. As a result, the fuel efficiency of hybrid scooter has significantly increased in comparison with that of engine scooter.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.143-144
• /
• 2011

Due to enhanced demands on quality, security and reliability of the electric power energy system, a microgrid has become a subject of special interest. In this paper, output characteristics of energy storage system (ESS) with an electric double layer capacitor (EDLC) and battery energy storage system (BESS) of a renewable energy based microgrid were analyzed under grid-connected and islanded operation modes. The microgrid which consists of photovoltaic and wind power turbine generators, diesel generator, ESS with an EDLC, BESS and loads was modeled using real time digital simulator. The results present the effective control patterns of the microgrid system.

• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.402-412
• /
• 2014

This paper proposes a novel electric propulsion system for naval ships, which consists of Active Front End (AFE) converters directly connected to battery Energy Storage Modules (ESMs). Employing the proposed AFE converters with ESMs in the power systems of naval ships can enhance the reliability and quality of the electric power. Furthermore, the fuel-efficiency of the generator can be improved by a higher loading factor of the generator and its prime movers. The proposed AFE configuration does not require an additional dedicated DC/AC converter for the ESMs. Instead of that, the AFE converter itself can control the DC link voltage and the discharging and/or charging of the ESMs. A control scheme to achieve these control objectives is also presented in this paper. The overall power system, including the generators and electrical loads of a naval ship, is implemented by a small scaled Power Hardware-In-the-Loop (PHIL) simulator. Through this experimental setup, the proposed system configuration and the power control strategies are verified. It is shown that the fuel-efficiency and transient dynamics can be improved in the normal and contingency operation modes.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.183-184
• /
• 2017

최근, 모바일 디바이스 성능 고도화로 인해 내장된 컴퓨팅 및 스토리지 자원을 이용한 다양한 연구가 활발히 진행되고 있다. 그러나 모바일 디바이스내 제한된 배터리량으로 인해 개발된 많은 어플리케이션을 동작하는 데 원활하지 못한 문제점을 가진다. 최근 연구는 어플리케이션의 몰입감 및 모바일 디바이스의 자체 성능 최적화에 대한 연구가 집중되어 있다. 현재, 분산된 모바일 디바이스내 비가용 유휴 자원을 활용한 연구가 미흡한 단계로 모바일 디바이스의 자원 고가용성을 위한 자원 관리 연구가 필요하다. 기존에 모바일 자원 통합 기법인 Mobile Resource Management(MRM)가 연구되었지만, 작업량 증가에 따라 인프라내 특정 모바일 디바이스의 배터리 소모가 급격히 소모되는 문제점을 내재한다. 따라서 본 논문에서는 MRM 인프라내 특정 모바일 디바이스의 급격한 배터리 소모 방지를 위해 모의적으로 모바일 디바이스 연결 및 작업 수행하여 최적의 작업 분배를 위한 MBC-Sim을 제안한다.