• Journal of Korea Multimedia Society
• /
• v.10 no.3
• /
• pp.348-357
• /
• 2007

One of the major issues in recent researches on wireless sensor networks is to reduce energy consumption of sensor nodes operating with limited battery power, in order to lengthen their lifespan. Among the researches, we are interested in the schemes in which a sensor node periodically turns on and off its radio and requires information on the time when its neighbors will wake up (or turn on). Clock synchronization is essential for wakeup scheduling in such schemes. This paper proposes three methods based on the asynchronous averaging algorithm for clock synchronization in sensor nodes which periodically wake up: (1) a fast clock synchronization method during an initial network construction period, (2) a periodic clock synchronization method for saving energy consumption, and (3) a decision method for switching the operation mode of sensor nodes between the two clock synchronization methods. Through simulation, we analyze maximum clock difference and the number of messages required for clock synchronization.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.420-428
• /
• 2018

In this paper, represented uninterruptible power supply (UPS) equipment maintaining constant output voltage, the proposes a photovoltaic system constructed with a step up boosting chopper and single phase pulse width modulation (PWM) voltage source inverter. as power source disconnection, voltage variation and output current variation with load variation. This system is driven by being synchronized voltage fed inverter and AC source, and in the steady state of power source charge battery connected to DC side with solar cell using a Photovoltaic that it was so called constant voltage charge. It can be results of saving electric power, and through a normal operation of energy storage system (ESS), the system operated the LED a calling on signal changes at the airport in an efficient manner. In addition, better output waveform was generated because of PWM method, and it was proved to test by experiment maintained constant output voltage regardless of AC source disconnection, load variation, and voltage variation of AC power source.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1189-1194
• /
• 2005

An Ad-hoc network which do not use wired and base station system is composed the group of mobile and wireless nodes. That is various type of restriction. The biggest restriction is depend on the confined energy of battery. The network is devide more than two, if one of nodes consumed all energy that node can no longer participate to network. In recent years, the many number of studies research not only energy saving but also the networks lifetime extension which is to solve this problem. In this paper, we examine a AODV routing protocol which is modified to improve networks lifetime in mobile ad-hoc network. The one of improvement for AODV protocol is maximize the networks lifetime as apply Energy Mean Value algorithm which considerate node energy. We show the effectiveness for modified AODV(New-AODV) compared with AODV using NS-2(Network Simulator 2) the various performance metrics.

• The Journal of the Korea Contents Association
• /
• v.7 no.6
• /
• pp.69-78
• /
• 2007

In recent years, embedded mobile systems have been expanding their application domains from embedded portable devices which only execute a specialized application such as MP3 player or digital camcoder to digital convergence devices which execute more complicated applications converged various functionalities such as video and audio play, digital dictionary, DMB, games, phone, etc. As it requires the increasing hardware performance such as more faster CPU and more larger RAM, display, disk size, it has brought about a corresponding increase in power consumption. However, coupled with relatively small gains in battery capacity over recent years, the importance of software architecture including intelligent power management has become paramount. In this paper, we have ported UbiFOSTM with energy saving techniques on the ARM9-based MBA2440 platform. For energy savings, we adapted the dynamic power management and the device power management schemes based on monitoring workload. Experimental results with some well-known applications show that proposed low power technique could save energy up to 24 %.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.923-930
• /
• 2009

In this paper, we introduce a satellite conceptual design software which can be used for outlining a new satellite as well as for educational purpose. This software consists of three commercial tools: MATLAB, STK(Satellite Tool Kit), and Excel. The management of the design software is done by MATLAB which provides basic calculations, GUI(Graphical User Interface), Excel data base management, and STK control. STK, an orbital simulation software developed by AGI, takes a part of obtaining accurate orbital information of a satellite. Excel, a product of Microsoft, is used for the data base of previous satellites and for the saving place of temporary and final results of the software. The conceptual design of a satellite is to roughly estimate power system and mass. In the power system design, the sizes of solar array and battery are determined. Based on the database of existing satellites, we can estimate the subsystems's mass fraction of a target satellite. Design examples for Kompsat 1 and 2 are suggested for verification of the developed software.

• 전자공학회논문지 IE
• /
• v.47 no.1
• /
• pp.41-47
• /
• 2010

It is very important to prolong the lifetime of wireless sensor networks by using their limited energy efficiently, since it is not possible to change or recharge the battery of sensor nodes after deployment. LEACH protocol is a typical routing protocol based on the clustering scheme for the efficient use of limited energy. It is composed of a few clusters, which consist of head nodes and member nodes. Though LEACH starts from the supposition that all nodes have data transferred to a head, there must be some nodes having useless data in actual state. In this paper we propose a power saving scheme by making a member node dormant if previous sensed data and current data is same. We evaluate the performance of the proposed scheme in comparison with original clustering algorithms. Simulation results validate our scheme has better performance in terms of the number of alive nodes as time evolves.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1085-1092
• /
• 2012

Mobile communication systems define user state transition mechanisms in order to manage radio resources and battery power efficiently. In the state transition mechanism, a state with a higher energy consumption inherently offers a shorter access delay, so there is a tradeoff between the energy and delay performances. In this paper, we analyze the user state transition mechanism of UMTS by considering the bursty traffic attributes of mobile applications. We perform a numerical evaluation for both the energy consumption and the activation delay by Markov modeling of the state transition mechanism, and investigate their tradeoff relationship as functions of operational parameters. The resulting energy-delay tradeoff curves clearly show an achievable performance bound of the user state transition mechanism and also offer an optimal operation strategy to minimize the energy consumption while guaranteeing the delay requirement.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.4766-4786
• /
• 2016

Looking for missing companions who are out of touch in public places might suffer a long and painful process. With the help of mobile crowdsourcing, the missing person's location may be reported in a short time. In this paper, we propose MissingFound, an assistant system that applies mobile crowdsourcing for finding missing companions. Discovering valuable users who have chances to see the missing person is the most important task of MissingFound but also a big challenge with the requirements of saving battery and protecting users' location privacy. A customized metric is designed to measure the probability of seeing, according to users' movement traces represented by WiFi RSSI fingerprints. Since WiFi RSSI fingerprints provide no knowledge of users' physical locations, the computation of probability is too complex for practical use. By parallelizing the original sequential algorithms under MapReduce framework, the selecting process can be accomplished within a few minutes for 10 thousand users with records of several days. Experimental evaluation with 23 volunteers shows that MissingFound can select out the potential witnesses in reality and achieves a high accuracy (76.75% on average). We believe that MissingFound can help not only find missing companions, but other public services (e.g., controlling communicable diseases).

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.80-84
• /
• 2010

Data multicasting from a source to multiple sinks in wireless sensor networks is used to achieve both reducing communication costs and energy efficiency. Almost all existing schemes for the multicasting might be effectively performed by optimal construction of a multicasting tree between a source and multiple stationary sinks. However, in practical sensor applications, sinks could move around on the wireless sensor networks for own missions, such as scouting of soldiers and saving lives of victims by firefighters. Unfortunately, the sink mobility causes frequent entire reconstruction of the multicasting tree and thus it leads to exhaustion of battery power of sensors. Hence, we propose an energy-efficient multicast protocol to support multiple mobile sinks by the local multicast tree reconstruction, called Local Update-based geographic Multicasting for Mobile sinks (LUMM) for wireless sensor networks. Our simulation results show that our scheme for mobile sinks is more efficient in terms of energy resource management than other exist works.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.654-664
• /
• 2018

In this paper, this system is operated by PCS that is driven by being synchronized voltage fed inverter and AC source, and in the steady state of power source charge battery connected to DC side with solar cell using a photovoltaic (PV) that it was so called constant voltage charge. it can cause the effect of energy saving of electric power, from 10 to 20%. and through a normal operation of electric energy storage system (EESS). In addition, better output waveform was generated because of pulse width modulation (PWM) method, and it was Proved to test by experiment maintained constant output voltage regardless of AC source disconnection, load variation, and voltage variation of AC power source.