• Journal of Powder Materials
• /
• v.17 no.6
• /
• pp.489-493
• /
• 2010

Nickel-based and iron-based alloys have been developed and commercialized for a wide range of high performance applications at severely corrosive and high temperature environment. This alloy foam has an outstanding performance which is predestinated for diesel particulate filters, heat exchangers, and catalyst support, noise absorbers, battery, fuel cell, and flame distributers in burners in chemical and automotive industry. Production of alloy foam starts from high-tech coating technology and heat treatment of transient liquid-phase sintering in the high temperature. These technology allow for preparation of a wide variety of foam compositions such as Ni, Cr, Al, Fe on various pore size of pure nickel foam or iron foam in order for tailoring material properties to a specific application.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.658-661
• /
• 2010

The application of solar energy with creation of new industry is becoming diversification together. In this paper, we implement power supply the system of the single module type using solar energy. Through the implementation, we improve performance of system and it will be able to use for a long time efficiently also in the place where the electrical supply is difficult.

• International Journal of Computer Science & Network Security
• /
• v.22 no.4
• /
• pp.358-366
• /
• 2022

Wireless sensor networks (WSN) are becoming widely used in collecting and sensing information in different fields such as in the medical area, smart phone industry and military environment. The main concern here is reducing the power consumption because it effects in the lifetime of wireless sensor during commutation because it may be work in some environment like sensor in the battlefields where is not easy to change the battery for a node and that may decrease the efficiency of that node and that may affect the network traffic may be interrupted because one or more nodes stop working. In this paper we implement, simulate, and investigate S-MAC protocol with mobility support and show the sequence of events the sender and receiver go through. We tested some parameters and their impacts of on the performance including System throughput, number of packets successfully delivered per second, packet delay, average packet delay before successful transmission.

• Applied Microscopy
• /
• v.51
• /
• pp.19.1-19.7
• /
• 2021

The main purpose of this paper is the preparation of transmission electron microscopy (TEM) samples from the microsized powders of lithium-ion secondary batteries. To avoid artefacts during TEM sample preparation, the use of ion slicer milling for thinning and maintaining the intrinsic structure is described. Argon-ion milling techniques have been widely examined to make optimal specimens, thereby making TEM analysis more reliable. In the past few years, the correction of spherical aberration (Cs) in scanning transmission electron microscopy (STEM) has been developing rapidly, which results in direct observation at an atomic level resolution not only at a high acceleration voltage but also at a deaccelerated voltage. In particular, low-kV application has markedly increased, which requires a sufficiently transparent specimen without structural distortion during the sample preparation process. In this study, sample preparation for high-resolution STEM observation is accomplished, and investigations on the crystal integrity are carried out by Cs-corrected STEM.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.688-697
• /
• 2014

In this study, electrode bonding technology needed for high density of rechargeable battery is studied, which is recently researched for electric vehicle, the small leisure vessel. For the alternative overcoming the limit of stacking amount able to be stacked by conventional ultrasonic welding, the low temperature bonding method, eligible for minimum of degeneration of chemical activator on the electrode surface which is generated by thermal effect as well as the increase of conductivity and tension strength caused by electrode bonding using filler metal, not using conventional direct heating on the electrode material method, is studied. Specifically to say, recently used more generally the ultrasonic welding and spot welding method are not usable for satisfying stable electric conductivity and bonding strength when much electrode is stacking bonded. If the electrical power is unreasonably increased for the welding, due to the effect of welding temperature, deformation of electrode and activating material degeneration are caused, and after the last packaging, decline of electrical output and generating heat cause to reduce stability of battery. Therefore, in this study, induction heating system bonding method using high frequency heating and differentiated electrode method using filler metal pre-treatment of hot dipping are introduced.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.661-669
• /
• 2022

The need for miniaturization, high efficiency, and green energy resources as an energy storage device through the development of various electronic device has emerged. Accordingly, nanomaterials with excellent electrochemical properties, such as graphene and graphene hybrids, are attracting attention as promising materials. In particular, in the electric vehicle industry, cost reduction of secondary batteries is a key factor that can determine the spread of related industries, and it is most important to analyze R&D trends for battery material technology and respond to future technological development directions. Therefore, in this study, we tried to suggest a direction for R&D activities in the future by analyzing patent trends for graphene anode material technology for secondary batteries and deriving implications. As a result, in the case of anode material technology, the proportion of foreigners in the US and European patent markets was higher than in the Korean and Japanese patent markets, which means that the US and European marketability is high. In addition, Japanese applicants are filing high-level applications not only in the Japanese patent market but also in other countries suggests that Japan is leading the technology in this field. Lastly, the proportion of research institutes in the patent market of Korea and the US remains high compared to that of Japan and Europe, indicating that the commercialization of technology is still slow in those countries. Therefore research institutes and companies in Korea will have to establish their own strategies for developing and securing materials using the results of patent trends in major countries and major companies analyzed in this study.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.4
• /
• pp.269-277
• /
• 2019

In this paper, the compatibility analysis on the track record operation center for the regional industry upbringing is presented. The renewable energy sources such as solar, wind and battery energy storage system have been widely spread in these days. Also the requirements on the efficiency, reliability and power demands of these distributed systems are increasing and they can be demands on the construction of the data track record center for renewable energy industries in order to promote the local industries. The analysis on the size of the de-centralized power system are performed based on the technical issues. The necessities, requirements and center goals to meet these missions are presented in the following session. The proposal of the 1 MW operation center construction and operations are presented in the result of the compatibility analysis. And the lists of the required equipments in the operation facilities are suggested to have proper operational capabilities. The results of this research can be applied in the fundamental data to promote the regional renewable industries.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.915-923
• /
• 2023

As environmental regulations on carbon emissions are strengthened worldwide, the existing internal combustion engine-centered automobile industry is being reformed. In particular, large buses and large cargo trucks are pointed out as one of the main causes of environmental destruction due to excessive carbon emissions. The E-Highway power collection system, which has recently been proposed as a solution, uses the vehicle's battery as a backup power source or regenerative braking, depending on whether the pan head of the pentograph installed in the vehicle is in contact with the overhead line. It is used to store the excess energy generated. However, wear through contact due to continuous contact reduces the current collection effect and causes failure. In this paper, by using the current difference, the horizontal position information of the panhead in contact with the overhead line is acquired, thereby reducing the abrasion of the conductor and the panhead Make it possible to follow the overhead line. The position estimation method proposed in this paper simply configures a device that can detect the position of the overhead line of the pantograph by the difference in resistance. It is economical and has the advantage of reducing the volume. The characteristics of the pantograph estimating the location of overhead lines were analyzed using the difference between the two currents of the current collector, the feasibility of the positioning estimation system was verified through simulations and experiments.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.1
• /
• pp.16-22
• /
• 2024

Along with the high interest in electric vehicles and new renewable energy, there is a growing demand to apply lithium-ion batteries in the construction equipment industry. The capacity of heavy construction equipment that performs various tasks at construction sites is rapidly decreasing. Therefore, it is essential to accurately predict the state of batteries such as SOC (State of Charge) and SOH (State of Health). In this paper, the errors between actual electrochemical measurement data and estimated data were compared using the Dual Extended Kalman Filter (DEKF) algorithm that can estimate SOC and SOH at the same time. The prediction of battery charge state was analyzed by measuring OCV at SOC 5% intervals under 0.2C-rate conditions after the battery cell was fully charged, and the degradation state of the battery was predicted after 50 cycles of aging tests under various C-rate (0.2, 0.3, 0.5, 1.0, 1.5C rate) conditions. It was confirmed that the SOC and SOH estimation errors using DEKF tended to increase as the C-rate increased. It was confirmed that the SOC estimation using DEKF showed less than 6% at 0.2, 0.5, and 1C-rate. In addition, it was confirmed that the SOH estimation results showed good performance within the maximum error of 1.0% and 1.3% at 0.2 and 0.3C-rate, respectively. Also, it was confirmed that the estimation error also increased from 1.5% to 2% as the C-rate increased from 0.5 to 1.5C-rate. However, this result shows that all SOH estimation results using DEKF were excellent within about 2%.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.88-96
• /
• 1996

This study was conducted to establish model between lead and ZPP concentration in blood of workers exposed to lead. Workers employed in secondary smelting manufacturing industry showed $85.1{\mu}g/dl$ of blood lead level, exceeding $60{\mu}g/dl$, the Criteria for Removal defined by Occupational Safety and Health Act of Korea. Average blood lead level of workers in the battery manufacturing industry was $51.3{\mu}g/dl$, locating between $40{\mu}g/dl$ and $60{\mu}g/dl$, the Criteria for Requiring Medical Removal. Blood lead level of in the litharge and radiator manufacturing industry was below $40{\mu}g/dl$, the Criteria Requiring Temporary Medical Removal. Blood lead levels of workers by industry were Significantly different(p<0.05). 50(21 %) showed blood lead levels above $60{\mu}g/dl$, the Criteria for Removal and 66(27.7 %) showed blood lead levels between the Criteria for Requiring Medical Removal, $40-60{\mu}g/dl$. Thus, approximately 50 percent of workers indicated blood lead levels above $40{\mu}g/dl$, the Criteria Requiring Temporary Medical Removal and should receive medical examination and consultation including biological monitoring. Average ZPP level of workers employed in the secondary smelting industry was $186.2{\mu}g/dl$, exceeding above $150{\mu}g/dl$, the Criteria for Removal. Seventy seven of all workers(32.3 %) showed ZPP level above $100-150{\mu}g/dl$, the Criteria for Requiring Medical Removal. The most appropriate model for predicting ZPP in blood was log-linear regression model. Log linear regression models between lead and ZPP concentrations in blood was Log ZPP(${\mu}g/dl$) = -0.2340 + 1.2270 Log Pb-B(${\mu}g/dl$)(standard error of estimate: 0,089, ${\gamma}^2=0.4456$, n=238, P=0.0001), Blood-in-lead explained 44.56 % of the variance in log(ZPP in blood).