• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.3
• /
• pp.117-124
• /
• 2018

Wearable devices have become widespread. Fitness band is one of common wearable devices, providing useful functions. It helps users to monitor and collect their status such as heart rate and travel distance. Wearable devices, including fitness bands, are designed in small size and it ends up having small battery capacity. In that regard, it is necessary to expand the lifetime of wearable devices. Conventional power management scheme of wearable devices is based on DVFS Ondemand Governor and peripheral control by timeout event, such as turning off the LCD. In this paper, we propose a hybrid governor applying hardware supporting low power mode such as sleep mode to exploit the periodicity of fitness band task. In addition, we show hybrid governor outperforms in power consumption than conventional power management scheme of wearable devices based on Ondemand Governor through experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.649-651
• /
• 2016

Wireless Sensor Network(WSN) consists of spatially distributed sensors to monitor physical conditions, such as temperature, light and motion, and to pass their data through the network to a base station. Each battery equipped node is consumed to pass their data to their neighbors. We are gathering the amount of energy that was consumed to gather data and to pass it This paper describes processes of energy consumption of WSN in Matlab.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.43-44
• /
• 2007

The Underwater Wireless Sensor Network (UWSN) consists of sensor nodes equipped with a small battery of limited energy resource. Hence, the energy efficiency is a key design issue that needs to be addressed in order to improve the lifetime of the network. In this paper, we use a hexagon tessellation with and ideal cell size to deploy the underwater sensor nodes for the UWSN and propose an enhanced hybrid transmission method that considers the load balancing once the data transmission occurs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.843-845
• /
• 2011

Due to the short lifetime of the battery-based sensor network, study on the environmental energy-harvesting sensor network is being performed widely. In this paper, we analyze the system-level requirements on the sensor node which is needed for the efficient solar-powered wireless sensor network for the target application. In addition, we explain how the HW/SW components of our real solar-powered sensor node can satisfy the requirements mentioned above.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.469-477
• /
• 2008

The standard routing protocol of MANET(Mobile Ad-hoc NETwork), AODV(Ad-hoc On-demand Distance Vector), only considers the shortest path for routing, which may cause traffic concentration to a node at the critical path. Hence, the battery of the node will be dissipated rapidly to reduce the lifetime of the whole network. In this paper, power dissipation considered AODV is proposed for fair energy distribution in MANET, and verified using the computer simulation.

• Journal of Korea Multimedia Society
• /
• v.25 no.11
• /
• pp.1564-1571
• /
• 2022

Wireless sensor network(WSN) is being used in various fields such as reconnaissance, echelon scale identification, weather observation, etc. using small sensors in an environment without a network infrastructure environment. In addition, WSN uses limited battery power, so study on routing protocols to extend the lifetime of the network is important. PEGASIS, a hierarchical routing protocol, accounts for the majority of energy-efficient routing protocol studies and is well known as a representative protocol. In this study, based on PEGASIS, we propose a protocol that constructs multiple chains rather than one chain using the AoA of nodes. The proposed protocol has the advantage of reducing the transmission distance of nodes and eliminating unnecessary transmissions, thereby increasing energy efficiency compared to the existing protocols.

• International Journal of Computer Science & Network Security
• /
• v.22 no.4
• /
• pp.358-366
• /
• 2022

Wireless sensor networks (WSN) are becoming widely used in collecting and sensing information in different fields such as in the medical area, smart phone industry and military environment. The main concern here is reducing the power consumption because it effects in the lifetime of wireless sensor during commutation because it may be work in some environment like sensor in the battlefields where is not easy to change the battery for a node and that may decrease the efficiency of that node and that may affect the network traffic may be interrupted because one or more nodes stop working. In this paper we implement, simulate, and investigate S-MAC protocol with mobility support and show the sequence of events the sender and receiver go through. We tested some parameters and their impacts of on the performance including System throughput, number of packets successfully delivered per second, packet delay, average packet delay before successful transmission.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.3
• /
• pp.175-183
• /
• 2008

In wireless sensor networks with ad hoc networking capability, sensor nodes are battery operated and are usually disposable once deployed. As a result, each sensor node senses and communicates with limited energy and, thus, energy efficiency has been studied as a key design factor which determines lifetime of a wireless sensor network, and it is more improved recently by using so-called cross-layer optimization technique. In this paper, we propose and implement a new energy saving mechanism that reduces energy consumption during data collection by controlling transmission power at sensor nodes and then measure its performance in terms of lifetime improvement for the wireless sensor network platform ZigbeX. When every sensor node transmits sensed data to its clusterhead, it controls its transmission power down to as low level as communication is possible, resulting in energy saving. Each sensor node controls its transmission power based on RSSI(Received Signal Strength Indicator) of the packet received from its clusterhead. In other words, the sensor node can save energy by controlling its transmission power down to an appropriate level that its clusterhead safely receives the packet it transmits. According to the repetitive experiment of the proposed scheme on the ZigbeX platform using the packet analyzer developed by us, it is observed that the network lifetime is prolonged by up to 21.9% by saying energy during the data collection occupying most amount of network traffic.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.11
• /
• pp.846-850
• /
• 2009

Recently, wireless sensor networks have found their way into a wide variety of applications and systems with vastly varying requirements and characteristics such as environmental monitoring, smart spaces, medical applications, and precision agriculture. The sensor nodes are battery powered. Therefore, the energy is the most precious resource of a wireless sensor network since periodically replacing the battery of the nodes in large scale deployments is infeasible. Energy efficient mechanisms for gathering sensor readings are indispensable to prolong the lifetime of a sensor network as long as possible. There are two energy-efficient approaches to prolong the network lifetime in sensor networks. One is the compression scheme to reduce the size of sensor readings. When the communication conflict is occurred between two sensor nodes, the sender must try to retransmit its reading. The other is the MAC protocol to prevent the communication conflict. In this paper, we propose a novel approaches to reduce the size of the sensor readings in the MAC layer. The proposed scheme compresses sensor readings by allocating the time slots of the TDMA schedule to them dynamically. We also present a mathematical model to predict latency from collecting the sensor readings as the compression ratio is changed. In the simulation result, our proposed scheme reduces the communication cost by about 52% over the existing scheme.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.360-369
• /
• 2007

Since wireless sensor networks consist of nodes with the constrained battery, it is important to construct the topology performing energy-efficient routing while maximizing the whole network lifetime. Previous works related to this do not take into consideration the specific communication pattern in wireless sensor networks. In this paper, we propose a novel routing algorithm, called Up-Down Tree(UDT), which first constructs the tree topology based on distance and then adjusts the transmission range determined by the two different phases, tree setup and data gathering, to adapt the specific communication pattern in wireless sensor networks. Therefore, the UDT can improve energy efficiency, maximize the network lifetime, and block network partition Simulation results show that the UDT has the improved energy efficiency by constructing the optimal topology.