• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.792-797
• /
• 1994

Force fields of syndiotactic isoregic PVF crystal have been extracted by optimizing a structure of 2,4,6-trifluoroheptane with ab initio Quantum mechanical method with 6-31G * * basis set, and applied to calculate the structure parameters and elastic constants of the material. The cell parameters turned out to be 5.205$\AA$, of a axis(chain axis), 8.457$\AA$, of b axis and 4.621$\AA$ of c axis. These parameters are in fair agreement with those of the atactic X-ray structure(5.04$\AA$, 8.57$\AA$, and 4.95$\AA$,respectively). The young's modulus of defect free syndiotactic PVF crystal was computed to be 267 GPa comparable to those of polyvinilidene fluoride(277-293 GPa) and polyethylene(264-337 GPa) crystals. Bulk modulus value obtained at optimum geometry is more than twice greater than that obtained at experimental geometry due to large difference of elastic compliance constant (especially Sgj element) at these two different geometries.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.5
• /
• pp.581-587
• /
• 2005

This paper presents a hybrid face recognition method of both the first moment of image and the independent component analysis(ICA) of fixed point(FP) algorithm based on Newton method. First moment is a method for finding centroid of image, which is applied to exclude the needless backgrounds in the face recognitions by shifting to the centroid of face image. FP-ICA is also applied to find a set of independent basis images for the faces, which is a set of statistically independent facial features. The proposed method has been applied to the problem for recognizing the 48 face images(12 persons o 4 scenes) of 64*64 pixels. The 3 distances such as city-block, Euclidean, negative angle are used as measures when match the probe images to the nearest gallery images. The experimental results show that the proposed method has a superior recognition performances(speed, rate) than conventional FP-ICA without preprocessing. The city-block has been relatively achieved more an accurate similarity than Euclidean or negative angle.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.2
• /
• pp.111-122
• /
• 2023

This study aims to collect Big Data related to DIY clothing, analyze the results on a year-by-year basis, understand consumers' perceptions, the status, and reality of DIY clothing. The reference period for the evaluation of DIY clothing trends was set from 2012 to 2022. The data in this study was collected and analyzed using Textom, a Big Data solution program certified as a Good Software by the Telecommunications Technology Association (TTA). For the analysis of fabric-related DIY products, the keyword was set to "DIY clothing", and for data cleansing following collection, the "Espresso K" module was employed. Also, via data collection on a year-by-year basis, a total of 11 lists were generated and the collected data was analyzed by period. The following are the findings of this study's data collection on DIY clothing. The total number of keywords collected over a period of ten years on search engines "Naver" and "Google" between January 1, 2012 and December 31, 2022 was 16,315, and data trends by period indicate a continuous upward trend. In addition, a keyword analysis was conducted to analyze TF-IDF (Term Frequency-Inverse Document Frequency), a statistical measure that reflects the importance of a word within data, and the relationship with N-gram, an analysis of the correlation concerning the relationship between words. Using these results, it was possible to evaluate the popularity and growing tendency of DIY clothing products in conjunction with the evolving social environment, as well as the desire to explore DIY trends among consumers. Therefore, this study is valuable in that it provides preliminary data for DIY clothing research by analyzing the status and reality of DIY products, and furthermore, contributes to the development and production of DIY clothing.

• Korean Management Science Review
• /
• v.22 no.1
• /
• pp.103-125
• /
• 2005

Korean government is planning to adopt double entry bookkeeping with accrual basis in the government accounting system. This paper attempts to identify influencing attitudes of information producers toward the acceptance of the new service system. Several models are introduced, including Luder's Contingency Model, Cheng's Politico-Economic Model of Accounting Policy Choice, Roger's Diffusion of innovation, and Davis's Technology Acceptance Model(TAM). A set of constructs are developed as fellows : information producers' knowledges, experiences, altitudes toward the reform, characteristics of cash based accounting system and new accrual based system, a chief executive officer's willingness to support, availability of supporting systems, and social Influences from external environment. This study also incudes hey factors used in TAM, such as perceived usefulness and ease of use. Survey responses are gathered from accounting officers in government ministries and agencies as well as from local governments. Regression analysis shows that, for information producers, both 'perceived ease of use' and 'perceived usefulness' of the new system are the best explanatory variable for the dependent variable. It has also found that 'perceived usefulness' is explained best by individual characteristics such as knowledge and experiences, quality of current cash based s1n91e entry bookkeeping system, chief executive's support, Positive supporting systems and social influences. The useful guidelines for implementing double-entry bookkeeping system with accrual basis are also provided.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.9
• /
• pp.1335-1344
• /
• 2015

A set of prediction equations to estimate the nitrogen-corrected apparent metabolizable energy (AMEn) of individual ingredients and diets used in the poultry feed industry was evaluated. The AMEn values of three energy ingredients (maize, sorghum and defatted maize germ meal), four protein ingredients (soybean meal, maize gluten meal 60% crude protein, integral micronized soy and roasted whole soybean) and four diets (three containing four feedstuffs, complex diets, and one containing only corn-soybean meal, basal diet) were determined using a metabolism assay with male broilers from 1 to 7, 8 to 21, 22 to 35, and 36 to 42 days old. These values were compared to the AMEn values presented in the tables of energy composition or estimated by equation predictions based on chemical composition data of feedstuffs. In general, the equation predictions more precisely estimated the AMEn of feedstuffs when compared to the tables of energy composition. The equation AMEn (dry matter [DM] basis) = 4,164.187+51.006 ether extract (% in DM basis)-197.663 ash-35.689 crude fiber (% in DM basis)-20.593 neutral detergent fiber (% in DM basis) ($R^2=0.75$) was the most applicable for the prediction of the energy values of feedstuffs and diets used in the poultry feed industry.

• Journal of architectural history
• /
• v.17 no.4
• /
• pp.97-112
• /
• 2008

In this study, I attempted to the architectural design characteristics of Daeung-Jeon in Sudeok Temple. For this purpose, After I set up several assumptions in the basis of the general characteristics of Korean wood architecture, and then, analyzed floor plan, structural formation and section sizes of structure and bracket members in relation to module and unit. As the results, the characteristics of the design process of plan and structure are follows. (1) 1 ja(尺), the unit applied to this building is measured $307.6{\sim}318.3mm$) and the average is 312.9mm (2) It is estimated that the floor plan designed on the basis of the top of columns. By the applied unit, every bay of the front side and the side is each designed by 15 ja and 8.5 ja. (3) The section is composed of piled members which have same section size. As basic module of section size called 'jae(재;材)', it is estimated at width 0.45 ja by height 0.75 ja. And as the secondary module, height between jae and is called 'gyoe(계;)' and it wes designed by three height size of 0.25 ja, 0.27 ja and 0.30 ja, (4) It is estimated that the section plan was designed by the order as follows. Firstly, the horizontal position of purlins wes decided on the basis of the intersection point of long and short rafters, and then the position and the section size of purlins and jangheyo(長舌) wes decided on the basis of the slope of roof and rafters. Secondly, going down from purlins, the members of structure composed of 'jae' and 'gyoe' was repeated. Lastly, for the purpose of linking the structure members located on the center line of adjacent purlins organically, the height of whaban(화반) was controlled.

• Earthquakes and Structures
• /
• v.16 no.5
• /
• pp.611-623
• /
• 2019

A set of mid-rise bare and uniformly infilled reinforced-concrete frame buildings are analyzed for two different seismic intensities of ground-motions (i.e., 'Design Basis Earthquake' and 'Maximum Considered Earthquake') to study their floor response. The crucial parameters affecting seismic design force for acceleration-sensitive non-structural components are studied and compared with the guidelines of the European and the United States standards, and also with the recently developed NIST provisions. It is observed that the provisions of both the European and the United States standards do not account for the effects of the period of vibration of the supporting structure and seismic intensity of ground-motions and thereby provides conservative estimates of the in-structure amplification. In case of bare frames, the herein derived component amplification factors for both the design basis earthquake and the maximum considered earthquake exceeds with their recommended values in the European and the United States standards for non-structural components having periods in vicinity of the higher modes of vibration, whereas, in case of infilled frames, component amplification factors exceeds with their recommended value in the European standard for non-structural components having periods in vicinity of the fundamental mode of vibration, and only for the design basis earthquake. As a consequence of these observations, as well as capping on the design force (in case of United states standard and NIST provisions), in case of the design basis earthquake, the combined amplification factor is underestimated for non-structural components having periods in vicinity of the higher modes of vibration of bare frames, and also for non-structural components having periods in vicinity of the fundamental mode of vibration of infilled frames. At the maximum considered earthquake demand, excepting non-structural components having periods in vicinity of the higher modes of vibration of bare frames, all provisions generally provide conservative estimates of the design floor accelerations.

• Journal of the Korean Society of Safety
• /
• v.17 no.1
• /
• pp.87-93
• /
• 2002

In this thesis using FTA technique, the author proposes a new method of analysis of some accidents in construction work. Some efficient plans of safe facility investment are made out. For this study, I referred to 'The Death Accident in Construction Works', which have been published by Korea Industrial Safety Corporation from 1993 to 1999 for 6 years. I selected some of apartment constructions which have caused many deaths for the purpose of analysis in the study. I found that the concrete work using ferro-deck takes more deaths than the conventional construction. After finding this, I selected GANG FORM works using ferro-concrete which is the most widely used but causes many accidents. On the basis of the classification, I try to do some quantitative analyses by adding the death frequency and material factors. In order to draw up the most efficient investment plan, it is imperative that FT diagram be made out and that factors. In order to draw up the most efficient investment plan, it is imperative that FT diagram be made out and that minimal Cut Set be needed. It requires a great deal to labor and time to get Minimal Cut Set. The Minimal Cut Set which is formed of these process is the main factor to analyze disaster in the work. It is desirable that we add calculated percentage of accidents to these factors to these factors in value order, that is to say, from the high cost to low cost.

• Korean Institute of Interior Design Journal
• /
• v.23 no.1
• /
• pp.88-95
• /
• 2014

This study intended arousal of other viewpoints that deal with and understand spaces and shapes, by describing the concept of 'dimensions' into visual patterns. Above all, the core concept of spatial dimensions was defined as 'expandability'. Then, first, the 'golden ratio', 'Fibonacci sequence', and 'fractal theory' were defined as elements of each dimension by stage. Second, a 'unit cell' of one dimension as 'minimum unit particles' was set. Next, Fibonacci sequence was set as an extended concept into two dimensions. Expansion into three dimensions was applied to the concept of 'self-similarity repetition' of 'Fractal'. In 'fractal dimension', the concept of 'regularity of irregularity' was set as a core attribute. Plus, Platonic solids were applied as a background concept of the setting of the 'unit cell' from the viewpoint of 'minimum unit particles'. Third, while 'characteristic patterns' which are shown in the courses of 'expansion' of each dimension were embodied for the visual expression forms of dimensions, expansion forms of dimensions are based on the premise of volume, directional nature, and concept of axes. Expressed shapes of each dimension are shown into visually diverse patterns and unexpected formative aspects, along with the expression of relative blank spaces originated from dualism. On the basis of these results, the 'unit cell' that is set as a concept of theoretical factor can be defined as a minimum factor of a basic algorism caused by other purpose. In here, by applying diverse pattern types, the fact that meaning spaces, shapes, and dimensions can be extracted was suggested.

• The KIPS Transactions:PartA
• /
• v.11A no.5
• /
• pp.303-312
• /
• 2004

In this paper, we propose a methodology solving the problem of the hardware-software partitioning in reconfigurable systems using a Y-chart design space exploration and implement a simulator according to the methodology. The methodology generates a mapping set between tasks and hardware elements using the hardware element model and the application model. We evaluate the throughput by simulating cases in each mapping set. With the throughput evaluation result, we can select the mapping case with the highest throughput. We also propose an heuristic improving the simulation time by reducing the mapping set on the basis of the relationship between workload and parallelism. Simulation results show that we can reduce the size of mapping set which poses difficulties on hardware-software partitioning by up to 80%.