• Nuclear Engineering and Technology
• /
• 제31권3호
• /
• pp.303-313
• /
• 1999

Various interpolation methods have been compared for reconstruction of LMR pin power distributions in hexagonal geometry. Interpolation functions are derived for several combinations of nodal quantities and various sets of basis functions, and tested against fine mesh calculations. The test results indicate that the interpolation functions based on the sixth degree polynomial are quite accurate, yielding maximum interpolation errors in power densities less than 0.5%, and maximum reconstruction errors less than 2% for driver assemblies and less than 4% for blanket assemblies. The main contribution to the total reconstruction error is made tv the nodal solution errors and the comer point flux errors. For the polynomial interpolations, the basis monomial set needs to be selected such that the highest powers of x and y are as close as possible. It is also found that polynomials higher than the seventh degree are not adequate because of the oscillatory behavior.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.241-242
• /
• 2008

본 논문에서는 fuzzy granular computing 방법 중의 하나인 context-based FCM을 이용하여 granular-based radial basis function neural network에 대한 기본적인 개면과 그들의 포괄적인 설계 구조에 대해서 자세히 기술한다. 제안된 모델에 기본이 되는 설계 도구는 context-based fuzzy c-means (C-FCM)로 알려진 fuzzy clustering에 초점이 맞춰져 있으며, 이는 주어진 데이터의 특징에 맞게 공간을 분할함으로써 효율적으로 모델을 구축할 수가 있다. 제안된 모델의 설계 공정은 1) Context fuzzy set에 대한 정의와 설계, 2) Context-based fuzzy clustering에 대한 모델의 적용과 이에 따른 모델 구축의 효율성, 3) 입력과 출력공간에서의 연결된 information granule에 대한 parameter(다항식의 계수들)에 대한 최적화와 같은 단계로 구성되어 있다. Information granule에 대한 parameter들은 성능지수를 최소화하기 위해 Least square method에 의해서 보정된다. 본 논문에서는 모델을 설계함에 있어서 체계적인 설계 알고리즘을 포괄적으로 설명하고 있으며 더 나아가 제안된 모델의 성능을 다른 표준적인 모델들과 대조함으로써 제안된 모델의 우수성을 나타내고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.266-269
• /
• 2003

In this work, a new formulation is presented for analyzing the transient electromagnetic response from wire antennas using the time-domain integral equation. The solution method is based on the Galerkin's method that involves separate spatial and temporal testing procedures. Piecewise triangle basis functions have been used for spatial expansion functions for arbitrarily shaped wire structures. The time-domain variation is approximated by a set of orthonormal basis functions that are derived from the Laguerre polynomials. The method presented in this paper results in very stable transient responses from wire antennas.

• 한국농공학회지
• /
• 제32권E호
• /
• pp.88-94
• /
• 1990

Several models physically based to predict the evolution of the snowpack have been proposed. Validity of these models for hourly estimation is, however, questionable, since they have been tested only on a daily basis. A computational model to predict the amount of snowpack on an hourly basis in terms of snowload from a set of meterological measurements was developed and investigated the rapid snowmelt conditions during Fohn events in the Takada plain.

• 대한의용생체공학회:의공학회지
• /
• 제8권2호
• /
• pp.171-176
• /
• 1987

Wiener filtering method was applied to the dual energy imaging procedure in digital radiography(D.R.). A linear scanning photodiode arrays with 1024 elements(0.6mm H 1.3mm pixel size) were used to obtain chest images in 0.7 sec. For high energy image acquisition, X-ray tube was set at 140KVp, 100mA with a rare-earth phosphor screen. Low energy image was obtained with X-ray tube setting at 70KVp, 150mA. These measured dual energy images are represented in the vector matrix notation as a linear discrete model including the additive random noise. Then, the object images are restored in the minimum mean square error sense using Wiener filtering method in the transformed domain. These restored high and low energy images are used for computation of the basis image decomposition. Then the basis images are linearly combined to produce bone or tissue selective images. Using this process, we could improve the signal to noise ratio characteristics in the material selective images.

• Bulletin of the Korean Chemical Society
• /
• 제26권9호
• /
• pp.1421-1426
• /
• 2005

The stationary point structures and relative energies between them as well as binding energies of $(CO)_2$ have been investigated at the CCSD(T) level using the correlation-consistent basis sets aug-cc-pVXZ(X=T,Q,5). It is found that while the equilibrium structure corresponds to the C-bonded T-shaped configuration with intermolecular distance of 4.4 $\AA$, there exists another minimum, slightly higher in energy ($\sim$10 $cm^{-1}$) than the global minimum, corresponding to the O-bonded T-shaped configuration with the intermolecular distance of 3.9 $\AA$. The CCSD(T) basis set limit binding energy of $(CO)_2$ is estimated to be 132 $cm^{-1}$.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제13권2호
• /
• pp.141-159
• /
• 2009

In this article, we consider a weighted CVT-based reduced-order modelling for Burgers equation. Brief review of the CVT (centroidal Voronoi tessellation) approaches to reduced-order bases are provided. In CVT-reduced order modelling, we start with a snapshot set just as is done in a POD (Proper Orthogonal Decomposition)-based setting. So far, the CVT was researched with uniform density ($\rho$(y) = 1) to determine the basis elements for the approximatin subspaces. Here, we shall investigate the technique of CVT with nonuniform density as a procedure to determine the basis elements for the approximating subspaces. Some numerical experiments including comparison of two CVT (CVT-uniform and CVT-nonuniform)-based algorithm with numerical results obtained from FEM(finite element method) and POD-based algorithm are reported.

• Wind and Structures
• /
• 제1권3호
• /
• pp.243-253
• /
• 1998

The paper deals with numerical analysis of interference galloping of two elastically supported circular cylinders of equal diameters. The basis of the analysis is quasi-steady model of this phenomenon. The model assumes that both cylinders participate in process of interference galloping and they have two degrees of freedom. The movement of the cylinders is written as a set of four nonlinear differential equations. On the basis of numerical solutions of this equations the authors evaluate the correctness of this quasi-steady model. Then they estimate the dependence of a critical reduced velocity on the Scruton number, turbulence intensity and arrangements of the cylinders.

• 전자공학회논문지B
• /
• 제32B권11호
• /
• pp.1383-1392
• /
• 1995

In this paper, the method to incorporate TCVQ(Trellis Copded Vector Quantizer) into the encoding of the wavelet trans formed(WT) image followed by a variable length coding(VLC) or an entropy coding(EC) is considered. By WT, an original image is separated into 10 bands with various resolutions and directional components. TCVQ used to compress these WT coefficients is a finite state machine that encodes the input source on the basis of the current input and the current state. Wavelet basis used in this paper is designed by orthogonal spline function. A modified set partitioning algorithm to Wang's is also presented. A simple modification to Wang's algorithm gives a highly time-efficient result. Proposed WT-TCVQ encoder shows a very competitive result, giving 37.46dB in PSNR at 1.002bpp when encoding 512$\times$512 LENA.

• 응용통계연구
• /
• 제18권3호
• /
• pp.543-553
• /
• 2005

선형 로지스틱 모형은 신용위험 관리를 위한 신용평점 모형 구축에 있어서 널리 쓰이고 있는 방법론이다. 본 논문에서는 신용평점화를 위하여 로지스틱 회귀 방법에 기초한 스플라인 방법론을 다루고자 한다. 선형 스플라인과 자동적인 변수선택 방법을 채택하였다. 모의 실험을 통하여 스플라인 방법의 성능을 규명하였다.