• 제목/요약/키워드: Basin model

검색결과 1,708건 처리시간 0.033초

JHD를 이용한 경상분지 일원에서 발생한 지진의 진원위치 재결정 (II) (Relocation of Hypocenters, occurred in and around Kyeongsang basin, using by Joint Hypocenter Determination(JHD) method)

  • 전정수;박윤경
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2003년도 추계 학술발표회논문집
    • /
    • pp.8-12
    • /
    • 2003
  • Crustal velocity model is very important to determine the hypocenters of the local earthquakes, because the real crust is more complex and heterogeneous than simple homogeneous layered model. But the exact crust model in and around Kyeongsang basin area is not fixed till now. To solve this problem, Joint Hypocenter Determination(JHD) method is applied to the 151 local earthquakes, that is recorded at KIGAM local network from Mar. 25, 1999 to Dec. 16, 2001. According to the comparison of earthquake locations and depths for the conventional procedure and JHD relocation procedure, each locations is very similar, but depth distributions are different. An initial depth distribution derived from the conventional methods is irregular and does not show the general trends. JHD relocations reduce scatter and define a dipping plane.

  • PDF

동적계획법을 이용한 유수체계의 최적설계 (Optimal Design of Datention System using Incremental Dynamic Programming)

  • 이길성;이범희
    • 물과 미래
    • /
    • 제28권1호
    • /
    • pp.153-168
    • /
    • 1995
  • 본 연구의 목적은 다지점 유수체계의 최소비용 설계를 위한 효율적 모형을 개발하려는 것이며,로서 제안된 IDP 모형은 수문-수리학적 모형(강우-유출모형과 유역 및 하도 공수추적모형)과 최적화모형 등 2개의 부모형을 포함하고 있다. 목적함수는 대지구입비용과 유수지 설치비용 및 펌핑 시스템의 설치비용의 합으로 구성되며, 모형의 입력자료로는 각 하도자료와 수문 매개변수 및 설계강우와 비용함수등이 제시되어야 한다. 본 모형은 다지형 하도의 유수체계를 포함하고 있는 서울의 중랑천 유역에 적용되었으며, 모형의 적용결과 여러 조건의 변화에 대해서도 합리적인 유수체계의 설계가 가능하며, 다지점 유수체계의 설계에 대한 적용이 가능함을 보여주고 있다.

  • PDF

심해계류 모형시험 기법 연구: OTEC 계류시스템의 혼합형 모델링 (Study on Model Test Technique of Deepwater Moorings: A Hybrid Modeling of A OTEC Mooring System)

  • 홍섭;김진하;홍석원;홍사영
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2001년도 추계학술대회 논문집
    • /
    • pp.97-102
    • /
    • 2001
  • This paper describes an investigation how to carry out model tests of deepwater moorings exceeding the basin depth range. A hybrid mooring model, a combination of mooring lines scaled model and a couple of linear springs, is taken into account as an equivalent substitute of a full depth mooring system. Such an idea is applied to the model test of an OTEC mooring system to be installed in 1000m deep ocean. A 1/25 scaled model test of surface vessel and the upper part of mooring system is performed at ocean engineering basin. Possibility and limitation of the hybrid mooring modeling is discussed.

  • PDF

수하식 양식시설에 의한 운수저항의 평가와 수치모형 (Evaluation and Numerical Model of Hydraulic Resistance by Hanging Aquaculture Facilities)

  • 이종섭;박일흠
    • 한국수산과학회지
    • /
    • 제28권5호
    • /
    • pp.607-623
    • /
    • 1995
  • A numerical model of hydraulic resistance by hanging aquaculture facilities is developed and applied to a model basin and a field. A drag stress term formulated by the quadratic law of drag force is introduced Tn the equations of motion for a two-dimensional depth-averaged flow. In the model basin, numerical experiments ave tarried out for the various shape of obstructions, string density and layout of facilities etc.. The flow pattern around the facilities is affected sensitively by the density of string and the layout of facilities. On the other hand, the velocity decay due to the hanging oyster aquaculture facilities is observed in Kamak bay, where the maximum velcocity decay rate is $25\%$ in spring tide. The model is also applied to the field, Kamak bay. The velocity decay rate in the model is comparable with the field measurement data. The velocity decreases around the down-stream area of the facilities, .hut it increases in the other region. The water elevation decreases during the flood and it increases during the ebb.

  • PDF

유역과 담수호를 연계한 담수호 수질관리 시스템 개발 및 적용 (Development and Application of Freshwater Lake Water Quality Management System(ELAQUM) through the Linkage of Watershed and Freshwater Lake)

  • 김선주;김성준;김필식
    • 한국농공학회지
    • /
    • 제44권6호
    • /
    • pp.124-136
    • /
    • 2002
  • A freshwater lake water quality management system(FLAQUM) was developed to help regional manager for the water quality of a rural basin. The integrated user interface system FLAQUM written in Visual Basic, includes three subsystems such as a database management system, basin pollutant loads simulation model using SWMM model and freshwater lake water quality simulation model using WASP5 model. Pollutant load simulation model was applied to simulate the discharge and pollutant loading from the watershed, and freshwater lake water quality model was applied to analyze the changes in water quality with respect to watershed pollutant loads, and this model could be used in planning to control watershed pollutant source for water quality management. Database management system was constructed fur all input and output data processing, and it can be used to analyze statistical characteristics using constructed data. Results are displayed both graph and text for convenience of user. The results of FLAQUM application to Boryeong freshwater lake showed that the lake was in eutrophic condition. The major contribution of pollution comes from tributary No.1 and No.4, which have a large number of livestock farms. Therefore, water quality management must be focused on appropriate management of the livestock farming in the two breanchs.

선형 이산화 입력-출력 모형에 의한 유출해석 (Runoff Analysis Using the Discrete, Linear, Input-Output Model)

  • 곽기석;강인식;정연태;강주복
    • 대한토목학회논문집
    • /
    • 제14권4호
    • /
    • pp.859-866
    • /
    • 1994
  • 대부분의 중소규모 하천 유역에서는 수위 또는 유량 등의 실측자료가 빈약한 상태이기 때문에 홍수시의 유출량을 정확히 추정하고, 홍수피해를 경감시키기 위한 적절한 대책을 세우기가 매우 어려운 실정이다. 본 연구에서는 부산지방에 위치한 온천천 유역을 대상으로 하여 중소 하천 유역에 대한 선형 이산화 입력-출력 모형의 매개변수를 추정하고자 하였으며, 1993년 6월부터 실측한 유출량 자료와 저류함수법에 의해 산정한 유효강우량을 사용하여 선형 이산화 입력-출력 모형의 매개변수를 최소자승법과 상관함수법에 의해 추정하였다. 선형 이산화 입력-출력 모형에 의한 유출 수문곡선은 실측 수문곡선을 잘 재현한 것으로 나타났다. 또한 추정된 매개변수와 강우자료만을 사용하여 모의발생시킨 수문곡선 역시 실측 수문곡선과 잘 일치함을 알 수 있었다.

  • PDF

기후변화에 따른 안동·임하호 유역의 부유사량 분석 (Analysis of Suspended Solid of Andong and Imha Basin According to the Climate Change)

  • 이근상;김정열;안소라;심정민
    • 한국지리정보학회지
    • /
    • 제13권1호
    • /
    • pp.1-15
    • /
    • 2010
  • 본 연구는 GIS 기반의 SWAT (Soil and Water Assessment Tools) 모형을 이용하여 탁수발생 잠재가능성 평가지표를 개발하고 수계별 탁수 관리방안 대책을 지원하기 위해 기후변화에 따른 안동호와 임하호 유역의 유출량과 부유사량의 변화특성을 분석하였다. 장래 기후변화자료는 IPCC (Intergovernmental Panel on Climate Change)에서 제공하는 A1B 기후변화시나리오의 MIROC3.2 hires 모델의 결과값을 이용하여 생성하였다. 과거의 기후자료(1977~2006)를 기반으로 20C3M (20th Century Climate Coupled Model) 모의값을 이용하여 강수와 온도를 보정한 뒤 CF (Change Factor) 기법으로 downscaling 하였다. 미래 기후변화 시나리오는 세 기간(2020s, 2050s, 2080s)으로 나누어 분석하였고, SWAT 모형과 연계하여 기후변화에 따른 유출량 및 부유사량의 변화를 산출하였다. 2020s, 2050s, 2080s 기간동안의 안동호와 임하호 유역의 유출량과 부유사량은 기준년도(2006)에 비해 증가하였고, 계절적인 분석에서도 봄, 가을, 겨울철 안동호와 임하호 유역의 유출량과 부유사량이 기준년도에 비해 증가하는 것으로 모의되었다. 단, 여름철 유량과 부유사량은 2020s에만 증가하고 2080s에는 감소하는 것으로 분석되었다.