• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.82-83
• /
• 2005

• Water for future
• /
• v.14 no.3
• /
• pp.37-46
• /
• 1981

The purpose of this paper is to provide a method of estimating the magnitude and frequency of floods on five major streams in Korea such as the Han, the naktong, the Geum, the Seomjin and the Yeongsan. Derivation of the flood frequency formulae is based on the multiple correlation method. For each gaging station in the region, flood frequency curves are drawn by GumbelChow and Weibull plot. where 24 gaging stations are selected for this study. After the station flood-frequency cruves have been prepared, discharges are read at selected recurrence intervals. Each set of discharges is then correlated with basin parameters, using regression equation. The basin parameters that are considered include drainage area, length of main stream, shape facotr, mean basin slope and main channel slope.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.427-437
• /
• 2016

The objective of this study is to develop the regional regression models based on the physiographical and climatological characteristics for estimating flow duration curve (FDC) in ungauged bsisns. To this end, the lower sections with duration from 185 to 355 days of FDCs were constructed from the 16 gauged streamflow data, which were fitted to the two-parameter logarithmic type regression equation. Then, the parameters of the equation were regionalized using the basin characteristics such as basin area, basin slope, drainage density, mean annual precipitation, mean annual streamflow, runoff curve number in order that the proposed regression model can be used for ungauged basin. From the comparison of the estimated by the regional regression model with the observed ones, the model with the combination of basin area, runoff curve number, mean annual precipitation showed the best performance.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.157-163
• /
• 2011

In this study, after the target basin was divided into both overland and channel grids, the travel time from center of each grid cell to watershed's outlet was calculated based on the manning equation. Through this process, volumetric discharge was calculated according to the isochrones and finally, the direct runoff hydrograph was estimated considering watershed's hydrodynamic characteristics. Sanseong subwatershed located in main stream of Bocheong basin was selected as a target basin. The model parameters are only two: area threshold and channel velocity correction factor; the optimized values were estimated at 3,800 and 3.3, respectively. The developed model based on the tuned parameters led to well-matching results between observed and calculated hydrographs (mean of absolute error of peak discharge: 3.41%, mean of absolute error of peak time: 0.67 hr). Moreover, the analysis results regarding histogram of travel time-contribution area demonstrates that the proposed model characterizes relatively well hydrodynamic characteristics of the catchment due to effective rainfall.

• Water for future
• /
• v.23 no.1
• /
• pp.89-98
• /
• 1990

This study is developed the runoff analysis method that is used the geomorphologic instantaneous unit hydrograph to the relative role of network geometry in a basin. The quantitative expressions for the geomorphologic characteristics of a basin are used Shreve's link sepration and width function method. The network geometry are used Weibull's distribution as probability model of the width function, the structural characteristics of channel networks and the other geomorphologic parameters for the gaged basin.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.911-924
• /
• 2003

Many researches have been conducting on extracting geometry data and hydrologic parameters by using GIS technique. However, there is no clear standard on those methods yet. This study examines the changing pattern of runoff responses characteristics with applying lumped model on divided watershed. WMS is used in order to divide watershed and calculate hydrologic geometry data and parameters by GIS technique. HEC-1 is adopted as a hydrologic model to establish runoff responses. The basin is divided into small watersheds, which are approximately same size. This research conducted runoff response simulation of Pyoungchang River and Wichon River Basin. Especially, research was focused on what is the most appropriate level as a divined sub-basin, and tested the effect of size of sub-basin for the runoff response simulation. The results showed the size of sub-basin was not an important factor for the simulation results after a certain size. The results of this study can be applied as an appropriate guidance to select optimal simulation size of watershed for the lumped model in a specific watershed.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.3
• /
• pp.345-352
• /
• 2009

The purpose of inlet baffle is to distribute the flow uniformly over the entire cross-sectional area of the sedimentation basin. The goal when designing this baffle is to achieve some head loss while keeping the velocity gradients through the ports equal to the velocity gradient in the end of the flocculator, so as to not break up the flocs. Sedimentation tank performance is strongly influenced by hydrodynamic and physical effects such as inlet design. This study was conducted to evaluate the effect of open ratio of the inlet baffle on hydraulic behavior within a rectangular sedimentation basin using CFD simulation and ADV technique. In order to verify the CFD simulation, we measured the factual velocity at 18 points in the full-scale sedimentation basin at Y water treatment plant. Good agreement was obtained between the CFD predictions and the experimentally measured data. From the simulation results of the existing basin with 7.4 % open ratio, it was investigated that extreme decrease in velocity occurred in the middle of basin. Since then, flow features was unstable. The region which the velocity decrease rapidly moved forward to the flow direction in proportion to the increase of inflow velocity. Also, it was investigated that the flow characteristic of 6.0 % open ratio was significantly different from 7.4 % open ratio at the same configuration condition. These results are a clear indication that inflow momentum and open ratio are the parameters affecting the characteristics of hydraulic patterns. The influence of these parameters on the sedimentation performance requires further study.

• The Journal of Engineering Geology
• /
• v.10 no.3
• /
• pp.263-272
• /
• 2000

The main objective of this study is to simulate the rainfall-runoff relationship of the Ohwon rivet basin. For the this study, we used GIS technique and HMS(Hydrological Modeling System). In this study, watershed itself and geometric factors of watershed are extracted from DEM by using a GIS technique. The scanned data of topographical map with scale of 1:50,000 in the Ohwon river basin is used to this study and it is converted to DEM data. The parameters of Hydrological Modeling System as watershed area(A), river length, SCS Curve Number(CN) etc. are extracted by using the GIS technique in the Ohwon Basin. Extracted parameters are applied to the Hydrological Model System, then the paramenters optimized by the observed data and rainfall data. Then, the optimized parameters and Hydrological Modeling System are applied to the study area for the simulation of rainfall-runoff relationship. With the resultn of this study, GIS technique is useful to the extraction of watershed characteristics factors and Hydrological Modeling System is successful to the simulation of rainfall-runoff relationship.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.45-51
• /
• 1999

The attenuations of peak vertical displacements are studies using a conventional least squeare regression technique for microearthquakes occurred in the Kyungsang Basin southeastern Korea. The regression model applied to bandpass-fitered ground motion data includes parameters to account for geometric spreading anelastic attenuation depending on frequency source size and station site effects. Thirty nine displacement traces obtained by integrating velocity records for six shallow local microearthquakes are used to determine attenuation characteristics in the Basin. The regression result of the peak amplitude data leads to Q(f)=59.9 {{{{ {f }^{0.955 } }} for 1.5Hz$\leq$ f $\leq$ 25 Hz. It appears that the anelastic attenuation in the Kyungsang Basin is greater than that in the Western North America Area.

• Water for future
• /
• v.10 no.1
• /
• pp.71-77
• /
• 1977

The stream morphological characteristics of a watershed play a significant role in the analysis of rainfall-runoff relations in a river basin and a quantitative description of these characteristics is essential for determining the appropriate values of physical parameters of a watershed which usually are input data for rainfall-runoff simulation models. In this study the stream morphological characteristics of the Gab River basin, which is one of the three major tributaries of Geum River, was determined quantitatively by the Horton-Strahler's method. The result showed that the Gab River System was developed very closely to the patterns generally described by the laws of Horton. The basic relations concerning the morphological characteristics deriveed in this study are the relations of stream length, and average stream slope, the stream length-drainage area relation, relative height-relative drainage area relation, and the relation between the proportional stream order and drainage area. No correlation analysis was possible between the morphological parameters and the streamflow due to non-existence of the stage gauging stations on the Gab River System.