• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.137-144
• /
• 2014

This paper proposes a novel procedure that uses a combination of overlapped basic convex shapes to decompose 2D silhouette image. A basic convex shape is used here as a structuring element to give a meaningful interpretation to 2D images. Poisson equation is utilized to obtain the basic shapes for either the whole image or a partial region or segment of an image. The reconstruction procedure is used to combine the basic convex shapes to generate the original shape. The decomposition process involves a merging stage, filtering stage and finalized by compromising stage. The merging procedure is based on solving Poisson's equation for two regions satisfying the same symmetrical conditions which leads to finding equivalencies between basic shapes that need to be merged. We implemented and tested our novel algorithm using 2D silhouette images. The test results showed that the proposed algorithm lead to an efficient shape decomposition procedure that transforms any shape into a simpler basic convex shapes.

• Fashion & Textile Research Journal
• /
• v.8 no.2
• /
• pp.209-213
• /
• 2006

The 3-D information is useful as basic data which has been utilized in the development of simulating technology as fit-simulation. The experiment is designed to take some useful data on the variant shapes which contribute in simulating the adaptability of the clothes. The general figure of the clothes are made after the figure of the basic standing posture of the human body. The shape of the clothes fits with kinetic characteristic of the human body as the form of the clothes gets twisted, the ease of the clothes changes, and the clothes itself expands. We studied the dressed shapes of blouse according to two types of the arm movement(basic posture and reach forward) and three types of clothes(foundation, blouse with short sleeves and sleeveless) in the sit-down-posture. We accomplished some experimental data on three-dimensional measurement of the dressing shapes using TDS-3100 3-D scanner made in Japan PULSTECH. It is considered that the variant of shapes and distribution of gaps in the dressed shapes of blouse are determined by the adaptability of clothes made in arm movement.

• Korean Journal of Child Studies
• /
• v.26 no.5
• /
• pp.391-391
• /
• 2005

This study focused on the development and effect of children's art creativity program applying basic three shapes : square, triangle, and circle. The program consisted of 10 art activities. A total of 55 children participated the 10 week program to examine the effectiveness of this program. The experimental design included a pretest, treatment, and post-test. Results showed that the experimental group children scored significantly higher on creativity in the posttest than the control group children.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.929-932
• /
• 1998

In this paper we propose a method of representing emotional experessions and lip shapes for sign language communication using 3-dimensional model. At first we employ the action units (AU) of facial action coding system(FACS) to display all shapes. Then we define 11 basic lip shapes and sounding times of each components in a syllable in order to synthesize the lip shapes more precisely for korean characters. Experimental results show that the proposed method could be used efficiently for the sign language image communication between different languages.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.4
• /
• pp.269-279
• /
• 2002

Geometric shape morphing is an interesting geometric operation that interpolates two geometric shapes to generate in-betweens. It is well known that Minkowski operations can be used to test and build collision-free motion paths and to modify shapes in digital image processing. In this paper, we present a new geometric modeling technique to control the morphing on geometric shapes based on Minkowski sum. The basic idea develops from the linear interpolation on two geometric shapes where the traditional algebraic sum is replaced by Minkowski sum. We extend this scheme into a Bezier-like control structure with multiple control shapes, which enables the interactive control over the intermediate shapes during the morphing sequence as in the traditional CAGD curve/surface editing. Moreover, we apply the theory of blossoming to our control structure, whereby our control structure becomes even more flexible and general. In this paper, we present mathematical models of control structure, their properties, and computational issues with examples.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.848-853
• /
• 1994

This paper describes the concept and basic technique of measuring torsional operational deflection shapes using a laser-based torsional vibration meter, a dual-channel FFT analyzer and operational deflection shapes software running on a PC. Torsional Operational Deflection Shapes (TODS) is defined similar to ODS (Operational Deflection Shapes), with the exception the TODS designates the operational deflection shapes of structures vibrating in a rotational, or angular, degree of freedom. Thus the TODS measurements can be applied to rotating shafts and the results of such a measurement are shown. In some cases it may be great benefit to apply order tracking and/or synchronous time domain averaging techniques in order to avoid smearing and reduce noise problems.

• Journal of Urban Science
• /
• v.12 no.2
• /
• pp.19-30
• /
• 2023

The seismic design of water tanks for fire protection is important to prevent secondary earthquake damages due to fires. In this study, the seismic performance of stainless steel water tanks was evaluated considering both static and dynamic water pressure effects, and the influence of different panel shapes was investigated through numerical analysis. First, a basic water tank model comprised of flat panels was built, and then water pressure distribution including sloshing effects was evaluated. In the result of structural analysis, many panels of the basic water tank exceeded a specified allowable stress for load combinations including earthquake loads. In order to reduce the bending stress of the panel by increasing the moment of inertial of the panel section, alternative shapes of a truncated quadrangular pyramid were developed. Five water tanks with different alternative panel shapes were built and analyzed for the same load combinations. Based on the results of the numerical analysis, a number of effective aspect ratios were selected and modified to increase economic feasibility through additional analysis and structural safety check.

• The Research Journal of the Costume Culture
• /
• v.23 no.5
• /
• pp.894-905
• /
• 2015

The present study analyzed data from the 3D measurement of the feet of men aged over 20 years residing in the capital region as part of the 6th Anthropometry of Size Korea. To analyze the characteristics of the foot shapes of young men aged 20~39 years and middle-aged/elderly men aged 40~69 years by age and by type, a cluster analysis was conducted using the factors derived through the factor analysis as independent variables. The results of the study that analyzed the characteristics of foot shapes by type according to differences in age were as follows. First, through the analysis of the characteristics of the foot shapes of young men by type, five factors were extracted, and the foot shapes were classified into three types: Type 1 (short and flat), Type 2 (thick), and Type 3 (long and wide). Second, through the analysis of the characteristics of the foot shapes of middle-aged/elderly men by type, six factors were extracted, and the foot shapes were classified into four types: Type 1 (short and regular), Type 2 (flat), Type 3 (thick), and Type 4 (long and regular). The results of the present study are expected to serve as basic data for the design of shoes by age and foot type.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.2
• /
• pp.35-49
• /
• 2016

Dopo was the clothing of the Joseon period, which had a strong value of Confucianism. Apart from the kings and princes, government officers and Confucian literati wore Dopo as their official clothing and the uniform. The basic form of Dopo had the straight collar similar to Jikryeong. The difference is the shape of a Mu, which was fixed inside or on the back section along the side line of the front section and made two flaps on the back section. The clothing found in the tombs of Bae Cheonjo (1532~?) are from the mid-16th century to the early 17th century with the clothing style of the early Joseon period. The outer collar of all clothing was the shawl collar except for the Sibok and the inner collar was sewn to this. Two items had square tray collars, which were folded in half and sewn inside in half. The sleeve had a straight inseam from the armhole and its end around the wrist was round and wide. The carp-shaped inseam of the sleeve and wide sleeve indicated a change of sleeve shape. The shapes of the collars and the wide overlapped section of the dual collars demonstrated the shapes of the initial outer robes. The man's outer coats with wide sleeves were mostly cotton-quilted clothing. As described above, this paper examines the basic shapes of outer robes including Sibok, Jikryeong and man's outer coats on the basis of the clothing and artifacts from the tomb of Bae Cheonjo (1532~?) and examined the shapes, composition and features of Dopo. This paper aims to improve awareness of the wisdom and spirit of ancestors in life hidden in the sewing of the three Dopo items and on the importance of historical research.

• The Research Journal of the Costume Culture
• /
• v.13 no.1
• /
• pp.6-17
• /
• 2005

The purpose of this research is to define low body shapes of Plus-sized women at ages between 21 and 69 whose satisfied the Plus-sized judgment criteria took part in this study. This research also classifies different body types, and provides basic data for designing skirt's and slacks' prototypes according to each body type. Based on factor analysis of the measured data, seven key factors are grouped. And four different body types are classified based on the cluster analysis using factor marks. Type 1 refers to those who are tall in stature and balanced. This body type is characterized by trapezoid body shape when looked from the front, and slim the abdomen, bulge the belly and flat the buttocks when looked from the side. Type 2 refers to short and an obese body shapes, with trapezoid front and bulge abdomen and belly and flat the buttocks. Type 3 refers to those who are of medium height and long-legged body shapes, with rectangular front, protruding belly and buttocks. Type 4 refers to obese body shapes, with rectangular front, protruding abdomen and belly, flat the buttocks. 9 items are available to judge Plus-sized women's low body types and the hit ratio is 93.5%.