• 한국터널지하공간학회 논문집
• /
• 제19권3호
• /
• pp.409-420
• /
• 2017

터널환기 계획시 소요환기량은 환기시설 용량을 결정하기 위한 중요한 인자이며, 소요환기량 산정을 위한 차종별 오염 물질 배출량(환기설계를 위한 기준배출량)은 현재 환경부에서 제시하는 '제작차 허용배출 기준'을 근거하여 산정하고 있다. 그러나, 2013년부터 환경부에서는 자동차에서 배출되는 오염물질을 산정하기 위한 규정으로 '자동차 총 오염물질 배출량 산정방법에 관한 규정'을 고시하고 이 규정에 '자동차 차종별 배출계수'를 제시하고 있다. 따라서 도로터널의 소요환기량 산정시 이를 적용하는 것에 대한 검토가 필요한 실정이다. 본 연구에서는 2015년 경유차량의 배출가스 조작사건 이후 자동차 배출가스 규제강화에 따라 터널의 소요환기량 산정에 미치는 영향을 검토하였으며, 최근 환경부에서 개정한 '제작차 허용배출량 기준'과 '자동차 차종별 배출계수'에 의한 소요환기량과 EURO 배출기준을 적용한 소요환기량을 비교 분석하였다. 또한 소요환기량 산정 근거에 따른 합리적인 환기시스템 용량결정을 위한 기초 설계자료를 제공하는 것을 목적으로 한다.

• 한국분무공학회지
• /
• 제20권4호
• /
• pp.223-229
• /
• 2015

This paper was designed to investigate emission characteristics of regulated pollutants (CO, HC, NOx and PM) from 134 diesel and gasoline passenger cars based on emission standards according to fuel additives. The experiments using chassis dynamometer were conducted under NEDC and CVS-75 modes. Comparison for fuel additive management and test between Korea, USA, EU and Japan, Korea was more strict than others. The fuel additives of this study was satisfied within fuel manufacturing standards. For with/without fuel additives according to diesel emission standards, NOx of EURO 4 and EURO 5 showed a relatively similar tendency. In the case of PM reduction rate, EURO 5 was over 20% increased than EURO 4. In the case of standard deviation/average ratio for gasoline vehicles, variation interval was big for LEV 23.3~58% and ULEV 31.6~56.4%. Following the imposition of stricter regulations (EURO 5 and ULEV), difference rate for standard deviation was big. Especially, in the case of diesel vehicles, difference rate for NOx 68% and PM 48% was most big. The results of present study will be of assistance in completing the legislative process and will provide basic data to set up emission standards for fuel additives in Korea.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.71-74
• /
• 2008

This paper aims at studying the key design elements for the optimal ventilation system design, developing the design models and suggesting the design guidelines. The key elements include the basic exhaust emission rate, wall friction coefficient, vehicle drag coefficient and slip streaming effect, jet fan operating efficiency, natural ventilation force and installation scheme for jet fans and ventilation monitors in tunnel. The design models developed in this study are one-dimensional ventilation simulator to analyze the air flow, pressure profile and pollutant dispersion inside and outside tunnel, expert model to choose the optimal ventilation method, and the ventilation characteristic chart to evaluate the preliminary ventilation system. The study results are reflected in the design guideline for road tunnel ventilation system.

• 한국분무공학회지
• /
• 제17권3호
• /
• pp.152-157
• /
• 2012

This investigation decribes the effect of the combustion and emission characteristics of HCNG engine according to the high purity hydrogen contents. The HCNG fuel was made by the mixture with a high purity hydrogen ($H_2$) and a natural gas. The test vehicle was applied to the bi-fuel (Gasoline and CNG) system and this system was modified from the fuel supply and fuel tank. In addition, the three premixed HCNG fuels with mixed rate of 10, 20 and 30% of hydrogen were used to maintain the safety. In order to analyze the combustion characteristics of HCNG and CNG, the fuel was injected in the combustor with constant volume. The exhaust emission from light duty vehicle with bi-fuel system was analyzed by a chassis dynamometer and emission analyzer. From these results, the reduction rate of NOx emission increased in the HCNG fuel and emission amount of THC and CO shows a similar level with CNG fuel. This study can be utilized the basic data for the development of a new business plans related with HCNG engines.

• ETRI Journal
• /
• 제23권4호
• /
• pp.151-157
• /
• 2001

Spectroscopic and thermal analysis indicates that tellurite glasses doped with $B_2O_3$ and $GeO_2$ are promising candidate host materials for wide-band erbium doped fiber amplifier (EDFA) with a high 980 nm pump efficiency. In this study, we measured the thermal stabilities and the emission cross-sections for $Er^{3+}:^{4}I_{13/2}\;{\to}\;^{4}I_{15/2}$ transition in this tellurite glass system. We also determined the Judd-Ofelt parameters and calculated the radiative transition rates and the multiphonon relaxation rates in this glass system. The 15 mol% substitution of $B_2O_3$ for $TeO_2$ in the $Er^{3+}-doped\;75TeO_2-20ZnO-5K_2O$ glass raised the multiphonon relaxation rate for $^4I_{11/2}\;{\to}\;^4I_{13/2}$ transition from 4960 $s^{-1}$ to 24700 $s^{-1}$, but shortened the lifetime of the $^4I_{13/2}$ level by 14 % and reduced the emission cross-section for the $^4I_{13/2}\;{\to}\;^4I_{15/2}$ transition by 11%. The 15 mol% $GeO_2$ substitution in the same glass system also reduced the emission cross-section but increased the lifetime by 7%. However, the multiphonon relaxation rate for $^4I_{11/2}{\to}^4I_{13/2}$ transition was raised merely by 1000 $s^{-1}$. Therefore, a mixed substitution of $B_2O_3$ and $GeO_2$ for $TeO_2$ was concluded to be suitable for the 980 nm pump efficiency and the fluorescence efficiency of $^4I_{13/2}{\to}^4I_{15/2}$ transition in $Er^{3+}-doped$ tellurite glasses.

• 한국터널지하공간학회 논문집
• /
• 제9권3호
• /
• pp.309-321
• /
• 2007

2005년 하반기부터 국내 승용차시장에 경유승용차의 시판이 허용되면서 시장점유율이 점증하고 있어, 향후 서유럽의 경우와 같은 수준으로 까지도 증가할 것으로 예상된다. 본 연구에서는 경유승용차의 확대보급에 따른 터널 소요환기량 및 환기설비용량 변화를 검토하기 위하여 차령, 차종구성비, 매연 배출량 변화추이를 감안한 기준배출량을 달리하는 3가지 경우를 비교 분석하였다. 전형적인 2km 길이의 2차선 고속도로 터널을 대상으로 한 비교연구에서 현 환기설계기준상의 기준배출량과 경유승용차 구성비 40%를 가정한 Case 1의 경우, 현 설계기준보다 상대적으로 많은 소요환기량 및 환기설비용량을 요구하였다. 차령은 고려하나 경유승용차를 감안하지 않은 기준배출량을 설계에 반영하고 있는 실제 터널을 대상으로 한 Case2와, 차령 및 경유승용차 보급률을 동시에 고려한 배출계수에 의한 기준배출량을 적용한 Case3은 모두 EURO-3 규제기준과 비슷한 수준의 환기특성을 나타내는 것으로 분석되었다. 한편, 국내 기존 환기설계기준에 적용하고 있는 환경부 제작차 허용배출량 기준은 EURO-2 규제기준보다 높은 편으로 조사되었으며, 2006년부터 적용하고 있는 허용배출량 기준은 EURO-4 규제기준과 비슷하게 분석되었다. 본 연구는 향후 국내 경유승용차의 확대보급에 따른 경유차량 구성비의 증가, 매연 배출량 규제에 따른 매연배출량의 감소 등의 변화를 고려한 오염물질의 기준배출량 산정을 통하여 최적 소요환기량 및 환기설비용량 결정을 하기 위한 기초자료의 제공을 목적으로 하고 있다.

• 한국터널지하공간학회 논문집
• /
• 제21권6호
• /
• pp.779-793
• /
• 2019

소요환기량은 터널단면을 결정하기 위한 기초적인 자료로, 터널 내 환기 시스템을 결정하기 위한 주요한 요소이다. 소요환기량은 터널 내 교통량 자료에 기초하고 있으며, 차량으로부터 배출되는 오염물질량과 터널 내 허용농도 기준에 의해 결정된다. 본 논문에서는 처음으로 국내 기준이 한국도로공사에 의하여 규정된 1997년 이후 20년간 변화한 도로터널 환기설계기준을 검토하고 최근의 환경부 '제작차 배출허용기준'과 세계도로협회(WRA) 2019년 설계권고기준 등을 바탕으로, 터널의 특성, 특히 길이 및 종단경사를 고려하여 소요환기량 차이 및 영향을 비교분석하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.33-35
• /
• 2013

The present work is an experimental investigation on potential operating range using directly injected gasoline fuel in a single-cylinder compression ignition (CI) engine. The objectives of present study were to apply auto-ignited combustion to gasoline fuel and to evaluate potential operating range. In order to auto-ignite gasoline fuel in CI engine, the fuel direct-injection system and the intake air system were modified that a flow rate and temperature of intake air were regulated. The heat-release rate (HRR), net indicated mean effective pressure (IMEP), start of combustion (SOC), and combustion duration were derived from in-cylinder pressure data in a test engine, which has 373.33cc displacement volume and 17.8 compression ratio. The exhaust emission characteristics were obtained emission gas analyzer and smoke meter on the exhaust line system.

• 한국태양에너지학회 논문집
• /
• 제22권4호
• /
• pp.35-43
• /
• 2002

This research makes that quantitative radiation property of an actual town ward is obtained in quest of the parameter with regard to a radiation heat transfer property and set up several town ward models that reproduced a solid form of a city along the attribute of the city. A regular trend possibility that is able to evaluate a radiation characteristics of a town ward quantitatively from a town ward guideline and confirmation that is produced about each parameter as a result of a numerical value simulation it obtained. This research shot a coefficient of Gebhart's emission absorption. sky radiation absorption rate direct solar radiation absorption rate the parameter with regard to a radiation heat transfer characteristics of a town ward in each town ward model and a volume rate of a town ward advances case study under regular such condition and shot the absorption rate, direct and others days and calculated an absorption rate and checked about the relation between a town ward and each radiation heat transfer property of a city.

• Bulletin of the Korean Chemical Society
• /
• 제24권5호
• /
• pp.566-568
• /
• 2003

The phosphor $CaTiO_3:Pr^{3+}$ attracts much attention as a low-voltage red phosphor because of its good chromaticity and intrinsic conductivity. The addition of Ga into this CaTiO₃:Pr led the luminance intensity to greatly enhance without the change of the wavelength for the electronic transition and the peak shape of it. The increase of the recombination rate of electron-hole pairs through the Ga ion doping, which was expected to play a role of a hole-trap center, is proposed to be one of the reasons for the enhancement of the cathodoluminescence intensity.