• 복식
• /
• 제45권
• /
• pp.17-28
• /
• 1999

This study was to analyze factors of the body form and factors of bodice pattern through a surface developement figure for the tight bodice pattern design. Fifty replicas of the trunk surface were made by applying a surgical tape method of female subjects between 18 and 24 years old. The result was as follows: 1. The gaps between direct measurements and measurements of the surface development figure were regarded as allowances for the tight bodice pattern. 2. There are four factors of body form selected by factor analysis. The 1st factor signifies th degree of fatness in the upper body. The 2nd factor signifies the length of the upper body. The 3rd factor signifies the part of the front shoulder. The 4th factor signifies the part of the neck. 3. There are high correlations between center back line of the surface development figure and back length line side line front length line back neck depth back upper chest depth. There are high correlations between back bust line of the surface development figure and back interscye breadth line back upper chest line back armhole line. There are high correlations between front bust line of the surface development figure and front upper chest line front interscye breadth line front armhole line front neck breadth 4. The regression expressions of measurements of the surface development figure of the upper body were analyzed as(Fig. 3).

• 콘크리트학회논문집
• /
• 제19권3호
• /
• pp.323-331
• /
• 2007

본 연구에서 수행된 GFRP 보강근의 인발실험 결과로부터 보강근의 정착길이에 관한 설계식을 제안하였다. 총 48개의 인발실험 및 수정 인발실험을 완료하였다. 실험 변수는 묻힘길이 (L=10, 15, 20, $30d_b$), 수직 배근 및 수평 배근, 보강근의 높이 (H=100, 300mm) 및 피복두께 $(C=2{\sim}5d_b)$이었다. 실험에는 우리나라에서 개발된 D13 GFRP 보강근을 사용하였다. 수직배근된 모든 보강근 인발실험의 결과 평균부착강도는 6.39 MPa, 5% 분위수는 4.63 MPa이었다. 이 결과로부터 도출된 기본 정착길이에 관한 식은 2003년도 ACI 440 위원회에서 제시한 식과 일치하였다. 그러나 본 연구의 수정 인발실험의 결과는 이 식이 비보수적일 수 있다는 결론을 제시하였으므로, 보수적으로 기본 정착길이를 약11% 상향 조정하였다. 또한, 상부근 효과 및 피복두께의 정착길이에 관한 영향을 실험 결과로부터 결정하였고, 정착길이 식 제안에 포함시켰다. 본 연구에서 제안한 식은 압축강도 $20{\sim}24MPa$의 저강도 내지 보통강도 콘크리트 만을 대상으로 한 제약점이 있으나 콘크리트 강도가 증가함에 따라서 정착길이는 감소하므로, 이 식을 보다 높은 강도 콘크리트에 적용하는 경우 안전한 결과를 갖는 것으로 판단된다.

• Design & Manufacturing
• /
• 제15권3호
• /
• pp.19-25
• /
• 2021

The bending process of a press die is to bend a flat blank to the required angle. There are V-bending, U-bending, Z-bending, O-bending etc. for bending processing, and the basic principle of calculating the unfolding length of die processing is used as the neutral plane length. Since the constant of the length value of the neutral surface is different depending on the type of bending, it is impossible to accurately calculate it. In particular, Z-bending processing is performed twice, and it is set on the upper and lower surfaces of the blank, and bending processing occurs at the same time as the upward and downward bending, and the elongation of the material occurs and the material increases. It is not possible to check with the calculated value, and it occurs in many cases where the mold is modified after start-up. This study aims to minimize die modification by developing a formula to calculate the development length of Z-bend.

• 한국발생생물학회지:발생과생식
• /
• 제22권3호
• /
• pp.205-212
• /
• 2018

This study is to observe the developmental process of the larval skeleton according to the growth of the trident goby, Tridentiger obscurus belonging to the larvae and juveniles and use it as the basic data of the taxonomic study. 8 days after hatching, the parasphenoid was ossified with an average total length of 3.62 mm, and basioccipital began to ossify. Caudal vertebrae and neural spine ossified in vertebra. 17 days after hatching, the average total length of the long hairs was 4.32 mm, pterotic and epiotic were ossified, and interhyal and subopercle were ossified. 52 days after hatching, the average total length of the juvenile was 18.2 mm, and lateral ethmoid, hypohyal ossified, vertebrae were parapophysis, and epural bone was osseous to the bone.

• 복식
• /
• 제50권3호
• /
• pp.87-104
• /
• 2000

The women's apparel sizing system, currently used in the Korean industry, does not reflect measurement differences associated with varying body types and age. Forty five body meaqsurements were taken on 560 subjects, whoes eages ranged from 18-24. STatistical analysis of the data was coducted by using frequences, crosstables, correlation, oneway ANOVA, Regressio analysis. The results of this study were as follow. 1. Average height of women in their early 20's is 160cm, average bust girth 82cm, average hip girth 90cm and average drop 809. The correlation between height and grth items were low and the correlation of length items in the superior and inferior body were shown to bo high respectively. 2. The average Rhrer index is 1.28 and they ussually seem to be in the thin and standard body group. 3. body types were divided by differences between hip and bust sizes. N type(medium hip), A type (large hip), H type(small hip). A classification by body type showed that N type made up 58% while a type made up 24%. 4. The garment sizes for women in their early 20's were developed. 5. The new basic blocks and garment sizes for women in their early 20's were developed as follows : Bust girth (1/2) = 76N, 76A, 79A type($\frac{1}{2}$B+ 4cm) 79N type($\frac{1}{2}$B+ 3.5cm) 82N, 85N type ($\frac{1}{2}$B +3cm) Hip girth($\frac{1}{2}$) =N type($\frac{1}{2}$H + 2~2.5cm) Atype($\frac{1}{2}$H +1.5~2cm) Waist girth($\frac{1}{2}$)=$\frac{1}{2}$W + 2-3cm Back length =extimated measure -0.5cm Front length=76A, N (Back length + 2.2cm) 79A, N(back length +2.7cm) 82N(Back length +3.2cm) 85N(Back length + 3.7cm) Sleeve length=Sleeve length +3cm.

• 한국농공학회지
• /
• 제39권6호
• /
• pp.122-130
• /
• 1997

An experimental study was conducted to evaluate the bond performance of reinforcing bars embedded in high-strength concrete. Four bond specimens and ten beam splice specimens using concrete with compressive strength of 246kgf/$cm^2$ and 64lkgf/$cm^2$ were tested. The effect of several variables on basic development length and compressive strength of concrete is discussed in splice specimens. The test results showed that the current trend in concrete specification of making the splice length longer to compensate for having smaller cover and spacing may not be an effective approach.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.447-452
• /
• 1996

An experimental study was conducted to evaluate the bond performance of reinforcing bars embedded in high-strength concrete. Ten beam spice Specimens using concrete with compressive strength of 240kg/$\textrm{cm}^2$ and 640kg/$\textrm{cm}^2$ were tested. The effect of several variables on basic development length is discussed. The test results showed that the current trend in concrete specification of making the splice length longer to compensate for having smaller cover and spacing may not be an effective approach.

• 한국의류산업학회지
• /
• 제20권4호
• /
• pp.410-421
• /
• 2018

The study is designed to develop a educational basic pants patterns for men, and has been analyzed focusing on the university textbooks published since 2000. We also used CAD programs and virtual fitting programs to analyze the fitness of pants. To do this purpose, after choosing 7 Men's Wear textbooks, selected patterns were drawn and measured using PAD system and were compared and analyzed. Also, the appearance evaluation was examined through virtual fitting and then evaluated 21 male and female university students in their 20s. After supplementing the problems of the patterns in the existing textbooks, a pattern was developed and verified the fitness of the developed pattern. The results of comparing the proposed measurement items of each textbook for the pants pattern indicated a significant differences in terms of hip circumference of each pattern, which were between 96~105cm. A comparison of the drafting methods of each pattern showed the drafting methods for the crotch length, the front crotch extension, the back crotch extension were the difference. The results of appearance evaluation were pattern E presented the slimmest fit and pattern D presented the loosest fit. As a result of analysis of pants pattern, a waist circumference 82cm, a hip circumference 98cm, a crotch length 24cm, a pants length 104cm and a ham line width 46cm were most suitable. The development pattern was evaluated as superior to the existing pattern through the appearance evaluation of the virtual fitting.

• 한국의류학회지
• /
• 제26권6호
• /
• pp.821-832
• /
• 2002

The purpose of this study was to develop grading method of the basic brassiere patterns therewith, provide for 12 size's brassiere patterns and prove fitness of their's and shape. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. The basic sizes adopted at the first design stage (see fig.1-2) were 75AA, 75A and 75B each of which was designed as upper foundation basic pattern in reference to the cup size. At the second stage, each of the upper body foundation basic pattern was used to design lower cup, upper up, front panel and wing in their order(see fig.3-6). At the third stage, the other sizes were graded in reference to the three brassiere patterns (75AA, 75A and 75B) to produce 12 brassiere sizes(see Tab. 7-8). In order to develop the basic patterns of adult women's brassieres, 33 women were selected per 11 size combination(3 women per size combination), and then, their brassiere fitting was teated. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cup's bottom line or lower cup's top line, poor shape of upper cup's outside top line and shoulder strip position. On the other hand, on the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps'interval did not befit the ful1-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were addressed for the second teat. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. We were to present the final brassiere sizing system to extend the interior length of breast and the exterior length of breast on the basis of fitting test. Thereby, 75B$.$80A$.$80B$.$85A$.$85B's the interior lengths of breast were enlarged to 0.7cm, the rest size was enlarged to 0.5cm and the exterior length of breast was enlarged to 0.5cm regardless of sizes. 3. The upper foundation basic patterns of 75AA and 75B were presented and and the basic brassiere pattern and grading pattern were presented through to.

• 한국의류산업학회지
• /
• 제2권4호
• /
• pp.353-359
• /
• 2000

The purpose of this study was to develop the jacket pattern drafting method for Korean middle-aged women. The study was composed as follows : 1. Body measurement and statistical analysis : Two hundreds and forty four middle-aged women between the ages of forty five and fifty nine were measured on 52 items. 2. Development of new jacket pattern drafting method : Measurement items necessary to draft new jacket pattern were back waist length, bust girth, waist girth, hip girth, back interscye breadth, front interscye breadth, neck base girth, nipple length, nipple to nipple breadth, 1/2 posterior shoulder length and sleeve length. Basic jackets constructed from the experimental patterns were examined through the fitting test. 3. Evaluation of the new pattern drafting method : The sensory evaluations for appearance and comfort were applied to evaluate the new jacket pattern by comparing it with one of the conventional jacket patterns (Lee Hyung-Suk's). According to the result of sensory evaluation, the new jacket pattern was more positive.