• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.3-7
• /
• 1996

Metal Matrix Composite(MMC) material of 30% SiC particulate based on A1 matrix was machined by drilling and Electrical Discharge Machining (EDM) processes. When drilling process was executed, surface fracture due to brittle property near the bottom was found. It was also found the possiblity of difficult shape of EDM process for MMC material, but few the research about basic EDM characteristics. Material Removal Rate(MRR) was examined for different conditions and the surface morphology was evaluated by roughness values and Scanning Electron Microscopy(SEM) research. The higher the current is, the more MRR was obtained but the higher MRR was showed around 0.45 duty factor. The average roughness of EDMed surface was slightly changed with increased pulse current and increases with duty factor. The SEM photographs of EDMed surface showed recast region after melting.

• Journal of Welding and Joining
• /
• 제31권5호
• /
• pp.41-46
• /
• 2013

Different microstructures in the weld zone of a metal structure such as a fusion zone or heat affected zone are formed as compared to the parent material. Thus, the mechanical properties in the weld zone are different from those in the parent material. As the basic data for reliably understanding the structural characteristics of a welded PCHE specimen to be made of Alloy 617, the mechanical properties in the weld zone and parent material for a Alloy 617 plate are measured using an instrumented indentation technique in this study.

• 한국건설순환자원학회논문집
• /
• 제4권2호
• /
• pp.74-84
• /
• 2009

본 연구에서는 생산방식에 따라 생산된 고품질 순환모래의 기초물성평가를 통한 품질특성을 실험 실증적으로 평가함으로서, 최종 생산된 순환모래에 대한 성능을 평가하고, 목표 품질의 달성과 향후 성능 보완 및 활용의 확대, 고부가가치 창출을 위한 기초자료를 제시하고자 하였으며, 본 연구의 기초물성 실험결과, 직렬식 건식생산시스템과 병렬식, 소용량 습식생산시스템과 대용량을 거쳐 최종 생산된 순환모래인 RS-IV의 경우 절대건조밀도, 0.08mm체 통과량, 점토덩어리량, 유기이물질함유량에서 KS F 2573(순환잔골재) 기준에 만족하였으나, 흡수율에서는 대 소용량 습식생산시스템을 거쳐 최종 생산된 RS-IV만이 KS F 2573 기준치 5% 이하에 만족하였다. 흡수율의 품질 개선율 경우, 직렬식 건식생산시스템(7.13%), 병렬식(19.89%), 소용량 습식생산시스템(27.41%), 대용량(54.56%), 0.08mm체 통과량 경우, 직렬식 건식생산시스템(22.22%), 병렬식(39.92%), 소용량 습식생산시스템(91.89%), 대용량(98.16%), 점토덩어리량 경우, 직렬식 건식생산시스템(50.34%), 병렬식(76.77%), 소용량 습식생산시스템(98.60%), 대용량(99.32%)등으로 직렬식 건식생산시스템에 비하여 병렬식, 소용량 습식생산시스템에 비하여 대용량, 건식생산시스템에 비하여 습식생산시스템의 품질 개선율이 우수한 것으로 나타났다.

• 한국의상디자인학회지
• /
• 제20권4호
• /
• pp.163-174
• /
• 2018

Consumer and property evaluation of wetsuit materials were conducted to obtain useful data for developing competitive products that meet consumer expectations and improving industrial competitiveness. Data were collected through online surveys of 213 domestic consumers who have experienced wearing wetsuit among marine leisure activities. Five types of commercial wet suit materials by brand and four types of commercial wet suit materials with the same quality by thickness were collected. Then, their physical properties, salt water resistance and thermal insulation rate were evaluated and compared. As a result, the most commonly used wetsuit material is 3 to 5 mm thick, and the basic jersey material is bonded on both sides. As a processing for imparting functionality, processing for improving warmth and reducing surface resistance are most frequently used. Consumers often feel uncomfortable when wearing a wetsuit, such as wearing comfort, weight, ease of movement, stretchability, and clothing pressure, which are different from those of casual wear. Also, mechanical strength and warmth were considered to be the most important criteria for selection of wetsuit material for purchase or rental. The mechanical properties of brand A and B were better than those of brand C, D, and E. Resilience and thermal shrinkage were better in brand C, D, and E. On the other hand, there was no significant difference in the physical properties due to the difference in thickness of the material at the same quality. Also, it was found that the thicker the material, the more stable it is in the heat. Brand A and B had superior salt water resistance than brand C, D, and E. In the thermal insulation test, brand A and B showed better insulation characteristics than brand C, D, and E, but the types of bonded fabric and surface finishing of materials were thought to have affected. In comparison of the thickness, the thicker the materials, the better the salt resistance and the thermal insulation.

• Current Photovoltaic Research
• /
• 제11권4호
• /
• pp.108-113
• /
• 2023

Pressure to reduce costs in the current solar market is driving the development and implementation of new module designs and prompting the use of new materials and components. In order to utilize the variability of each material that makes up the module, it is essential to understand the basic characteristics of the material. In this article, we evaluate light degradation after UV irradiation as an encapsulation material. Measure and analyze the results of various characteristic tests for discoloration, optical and electrical property degradation before and after UV accelerated testing. To evaluate weathering stability, UV tests were performed comparing existing EVA and UVT-EVA, POE and improved low-cost POE. Even in the weather resistance test with a total UV exposure of 60 kW/m², the properties of the encapsulants were mostly stable. EVA and POE-based encapsulants showed slight differences, and these slight differences are believed to pose a threat to long-term stability. This study is a basic analysis of encapsulation research for PV modules and will be helpful in understanding future development and encapsulant properties.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.233-238
• /
• 1998

For substitution for crushed sand, high strength aggregate for cement and concrete using coal ash as a main material was prepared and then compared its physical properties with those of crushed sand. Effect of mix proportion change of raw materials on the property of aggregate was checked. On the basis of these experimental results we are going to comprehend the reutilization of coal ash and utilize a basic data for judging possibility the substitution of crushed sand.

• 자원환경지질
• /
• 제32권2호
• /
• pp.151-159
• /
• 1999

This research was carried out to evaluate the possible usage of natural clay materials collected from the Kimpo landfill site and nearby clay mines as a clay liner material. In order to evaluate the possible usage as a clay liner material, specific gravity, pH, loss-on-ignition, organic carbon content and mineralogical composition of clay materials were measured. The Atterberg limit test and the size analysis were performed for the engineering classification and the prediction of hydraulic conductivity of clay materials. Caution exchange capacity and batch tests were also carried out for the assessment of attenuation capacity. Clay specimens of KPNCL, KP-1, KP-2 and SH were recommended as suitable clay linder materials from viewpoint of their basic quality and attenuation capacity.

• 항공우주시스템공학회지
• /
• 제3권1호
• /
• pp.42-46
• /
• 2009

The 1st development of "Human Powered Aircraft(HPA)" in Korea has been conducting by KAFA(Korea Air Force Academy) from Aug. 2008 to now. HPA is an aircraft powered by directly human energy. The thrust provided by the human power may be the only source and that is weak. Therefore, light weight and strong structure is first requirement. In this paper, treating a basic conceptual design of HPA and material property and material choice for HPA. Also analysing the structure and checking the safety of HPA.

• Journal of Welding and Joining
• /
• 제31권2호
• /
• pp.37-42
• /
• 2013

Different microstructures in the weld zone of a metal structure such as a fusion zone or heat affected zone are formed as compared to the parent material. Thus, the mechanical properties in the weld zone are different from those in the parent material. As the basic data for reliably understanding the structural characteristics of welded PCHE prototype made of SUS316L, the mechanical properties in the weld zone and parent material for a SUS316L plate are measured using an the instrumented indentation technique in this study.

• 한국지반신소재학회논문집
• /
• 제8권2호
• /
• pp.55-62
• /
• 2009

최근 국토의 균형 있는 발전을 위하여 서해안 및 남해안 지역에 주로 분포되고 있는 연약지반에 대한 건설공사가 활발히 이루어지고 있다. 이러한 연약지반은 지반의 강도가 약하고, 압축성이 강해서 구조물을 축조하기 전에 반드시 표층안정처리, 압밀촉진, 치환공법 등의 지반개량이 선행되어야 한다. 이러한 연약지반 개량공법 중 표층처리공법은 샌드매트의 포설을 이용한 처리가 주를 이루었다. 그러나, 샌드매트공법에 요구되는 모래의 양이 증가함에 따라 공급이 원활하게 이루어지고 있지 않은 상태이다. 본 연구에서는 이러한 문제점을 해결하고자 샌드매트 대체제로서 풍쇄 슬래그의 사용이 적합한지를 판단하기 위하여 기본 물성시험, 실내 통수능 시험, 침하특성 분석을 통해서 확인하고자 한다.