Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

Measurement of Weld Mechanical Properties of SUS316L Plate Using an Instrumented Indentation Technique

계장화 압입시험법에 의한 SUS316L판의 용접부 기계적 물성치 측정

  • 송기남 (한국원자력연구원 수소생산원자로기술개발부) ;
  • 홍성덕 (한국원자력연구원 수소생산원자로기술개발부) ;
  • 노동성 (프론틱스)
  • Received : 2012.12.17
  • Accepted : 2013.03.06
  • Published : 2013.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

Different microstructures in the weld zone of a metal structure such as a fusion zone or heat affected zone are formed as compared to the parent material. Thus, the mechanical properties in the weld zone are different from those in the parent material. As the basic data for reliably understanding the structural characteristics of welded PCHE prototype made of SUS316L, the mechanical properties in the weld zone and parent material for a SUS316L plate are measured using an the instrumented indentation technique in this study.

Keywords

References

  1. George E. Linnert : Welding Metallurgy 1, American Welding Society, New York (1965)
  2. K. N. Song and S. H. Lee : Lateral Crush Strength of Nuclear Fuel Spacer Grid Considering Weld Properties, Trans. Korean Soc. Mech. Eng. A, 36-12 (2012), 1663-1668 (in Korean) https://doi.org/10.3795/KSME-A.2012.36.12.1663
  3. K. N. Song, S. D. Hong, and H. Y. Park : High-Temperature Structural Analysis of a Small-Scale PHE Prototype - Analysis Considering Material Properties in Weld Zone, Trans. Korean Soc. Mech. Eng. A, 36-10 (2012), 1289-1295 (in Korean) https://doi.org/10.3795/KSME-A.2012.36.10.1289
  4. K. N. Song, J. S. Chang, S. H. Kang, and S. D. Hong : Measurement of Weld Material Properties of SUS316L Using an Instrumented Indentation Technique, Abstracts of the 2012 Autumn Annual Meeting of Korean Welding & Joining Society, 57 (2012), 94, Chang-won, Nov. 7-9 (in Korean)
  5. K. N. Song and D. S. Ro : Measurement of Mechanical Properties in Weld Zone of Nuclear Material using an Instrumented Indentation Technique, Journal of the Korean Welding & Joining Society, 30-3 (2012), 51-56 (in Korean)
  6. D. I. Kwon et al., : Indentation to Instrumented Indentation Technique for Evaluating Tensile Oroperties of ISO TR29281; Representative Stress-Representative Strain Method, Trends in Metals & Materials Eng., 22-2 (2009), 36-43 (in Korean)
  7. ISO TR29381 : Metallic Materials-Instrumented Indentation Test for Measurement of Indentation Tensile Properties (2008)
  8. ASTM Material Edition 2001
  9. ASME Boiler & Pressure Vessel Code Section II Part D (Customary), 2007
  10. K. N. Song, H. Y. Lee, C. S. Kim, S. D. Hong, and H. Y. Park : Macroscopic High-Temperature Structural Analysis Model for a Small-Scale PCHE Prototype (I), Trans. Korean Soc. Mech. Eng. A, 35-11 (2011), 1499-1506 (in Korean) https://doi.org/10.3795/KSME-A.2011.35.11.1499
  11. K. N. Song, S. D. Hong, S. H. Lee and H. Y. Park : Effect of Mechanical Properties in the Weld Zone on the Structural Analysis Results of Plate-Type Heat Exchanger Prototype and Pressurized Water Reactor Spacer Grid, Journal of Nuclear Science and Technology, 49-9&10 (2012), 947-960 https://doi.org/10.1080/00223131.2012.713571

Cited by

  1. Structural Integrity Evaluation of a Lab-Scale PCHE Prototype under the Test Conditions of HELP vol.2013, pp.1687-6083, 2013, https://doi.org/10.1155/2013/520145
  2. Measurement of Weld Material Properties of Alloy 617 Using an Instrumented Indentation Technique vol.31, pp.5, 2013, https://doi.org/10.5781/KWJS.2013.31.5.41
  3. Evaluation of High-Temperature Structural Integrity Using Lab-Scale PCHE Prototype vol.37, pp.9, 2013, https://doi.org/10.3795/KSME-A.2013.37.9.1189