• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.841-846
• /
• 2002

We applies a seasonal ARIMA model to the timely forecasting in a line utilization and its confidence interval on the base of the past data of the line utilization that QoS of the network is greatly influenced by. And this paper proposes the learning algorithm of dynamic threshold in line utilization using the SARIMA model. We can find the proper dynamic threshold in timely line utilization on the various network environments and provide the confidence based on probability. Also, we have evaluated the validity of the proposed model and estimated the value of a proper threshold on real network. Network manager can overcome a shortcoming of original threshold method and maximize the performance of this algorithm.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.112-122
• /
• 2014

A main steam line break (MSLB) test at the ATLAS facility was simulated using the best-estimate thermal-hydraulic system code, MARS-KS. This has been performed as an activity at the third domestic standard problem for code benchmark (DSP-03) that has been organized by Korea Atomic Energy Research Institute (KAERI). The results of the MSLB experiment and the MARS input data prepared for the previous DSP-02 using the ATLAS facility were provided to participants. The preliminary MSLB simulation using the base input data, however, showed unphysical results in the primary-to-secondary heat transfer. To resolve the problems, some improvements were implemented in the MARS input modelling. These include the use of fine meshes for the bottom region of the steam generator secondary side and proper thermal-hydraulics calculation options. Other input model improvements in the heat loss and the flow restrictor models were also made and the results were investigated in detail. From the results of simulations, the limitations and further improvement areas of the MARS code were identified.

• Journal of Welding and Joining
• /
• v.28 no.1
• /
• pp.92-99
• /
• 2010

For the last couple of decades many studies have been carried out to find out solutions to improve the effectiveness and productivity of the plate forming process. The practical way for the automation of the plate forming process has not been, however, developed yet. Since the characteristics of heating machines may be different form each other, it is necessary to investigate the thermal deformation characteristics of the heating machine to be used in the automation system. And their characteristics may be updated as new information about thermal deformation by heating is accumulated. In this paper, data base system has been constructed based on the results of experiments and numerical analyses, which will be used in deriving the deformation estimation formula. The computer code which can automatically derive the deformation estimation formula has been also developed. This paper also illustrates how the formula is updated as experimental data are added. From the present findings, it can be said that the automatic deriving procedure may be important in the automated plate forming system since the heating line information to be generated must be directly influenced by the deformation estimation formula.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.271-278
• /
• 1995

An ECG data compression algorithM using max-min slope update is proposed and a real time 3 channel ECG transmission system is implemented using the proposed algorithm. In order to effectively compress ECG data, we compare a threshold value with the max-min slope difference (MMSD) which is updated at each sample values. If this MMSD value is smaller than the threshold value, then the data is compressed. Conversely, when the MMSD value is larger than threshold value, the data is transmitted after storing the value and the length between the data which is beyond previous threshold level. As a result, it can accurately compress both the region of QRS, P, and T wave that has fast-changing and the region of the base line that slope is changing slow. Therefore, it Is possible to enhance the compression rate and the percent roms difference. In addition, because of the simplicity, this algorithm is more suitable for real-time implementation.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.61-64
• /
• 2003

This study attempts to analyze both the mis-closures between triangulation points of 3 and 4 glade and permanent sites data, and accuracy of according as change the number of utilized GPS permanent sites and base lines for improvement of the accuracy in GPS surveying using permanent sites data. The result of this study show that the mis-closure between the two points and Jeonju/Chungju/Sangju/Daegu stations of NGI(National Geography Institute) are 0.0051 m, 0.0361 m, 0.0039 m and 0.0198 m respectively. It indicated that the mis-closures were less than the allowed values in the primary/secondary control point specification for GPS surveying, a mis-closure less than 30 mm for the distance less than 30 km and a mis-closure less than 1 PPM${\times}$D(km) for the distance greater than 30 km. Jinan 11 of actual surveying point for the base line 21.4911 km in Jeonju permanent site and 87.8156 km in Sangju permanent site, northing and easting for planimetric errors of Jinan 11 are 0.0120 m and 0.0113 m, northing and easting for planimetric errors of Jinan 12 are 0.0122 m and 0.0115 m.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.145-153
• /
• 1997

This paper constructs a data base to create the Hull lines prior to piece manufacture and nesting steps with a personal computer using the data of created as the advanced software, TRIBON. The lines are plotted smoohtly, which are called the spline. The S/W is excellentlt estimated on the ptrcision among shipping exclusive S/W, which are currentlyused So, the S/W is mainly used as as shipping CAD program. High-cost H/W and high-performance S/W(TRIBON etc.) sre used with the bases of technique and capital power in the big shipbuilding yard; but small but small and medium-sized shipbuilding yard and related companycan't purchase dueto the high-cost product. To bring upthe small and medium sized shipbuilding yard lacking little competitive power, the data base S/W is joined with the CADRA of graphic S/W and is developed to create the Hull lines to be needed on as automatic cutting process usiing the personal computer.

• Journal of the Korean Society for information Management
• /
• v.2 no.2
• /
• pp.170-178
• /
• 1985

The aim of this paper is to explain configuration, charge, and common command language of the EURONET that connect the Data Base of Scientific Technical Information in Europe and offer the On-line service to the user.

• The Korean Journal of Zoology
• /
• v.30 no.1
• /
• pp.44-52
• /
• 1987

The spontaneous bilateral asymmetry was analyzed in the hermaphroditic fish Rivulus marmoratus to obtain base line data on the developmental stability of this fish. The results obtained were as follows; 1. Eight kinds of countable anatomical characters except numbers of otolith and radii branchiostegi showed bilateral asymmetry at the frequency ranging from 9.8% to 64.7%. 2. Asymmetry index was not significantly different from that of gonochoristic fish species previously reported. Genetical implication of the results was discussed in relation to developmental stability and homozygosity of this species.

• Proceedings of the Korea Contents Association Conference
• /
• 2019.05a
• /
• pp.275-276
• /
• 2019

The purpose of this study was to assess condylar size in volumetric 3D imaging in patients with class I, class II, class III malocclusions. To evaluate the differences among the three experimental groups, the condylar values of men were analyzed. There was a significant difference in the measured values of height. Among the three experimental groups, the condylar measurements in women showed significant differences in height and width. This study is expected to be used for determining the connection between malocclusion and condyle as a base line data.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.178-194
• /
• 2011

Due to the population growth of the old aged, Korea is also entering into an aging society. But a research on the pattern design to the old aged is much to be desired. The purpose of this research is to design skirt pattern fitted for each body type by categorizing the lower body type of the old aged woman. For the way of research, categorized the body type by using the female measuring size from the 65 years old to 99 years old which has been measured by the Korean body size research as an assay data, and base on this data, a suitable skirt pattern for each body type of the old aged woman was designed by practicing the exterior evaluation. The data analysis was done with the statistical treatment in SPSS 12.0, and the results are as follows. The lower body type of the old aged woman were divided into the type 1. The circumference article is the biggest compared to the height article regarding to the lower body type of the old aged woman. The type 2. The height article and the circumference and thickness articles are the poorest. The type 3. The height article is the biggest and the hip width and calf circumference are thicker than the waist width. The type 4. The height article is the lowest and the waist width is thicker instead the hip and leg are thinner. In type 1, The pattern was modified by increasing 1cm a length of the dart and raising up 1.2cm at the cross point between side line and waist line. In type 2, the basic pattern was used, and in type 3, using the outline of the basic pattern however, increased 1cm a length of the dart and modified the amounts of dart by handling the art in curve, and modified the waist line to be more three-dimensional curves by raising up 1 cm at the cross point between waist line and side line and falling down 0.5cm at the cross point between the back center line and the waist line. In type 4, modified the amounts of front and back dart to 1.25cm, and raised up 0.8cm at the cross point between side line and waist line, and modified the waist line and the side seam line in a gentle curve by reducing circumference of the skirt tail to 1cm from the side seam line.