• 수산해양기술연구
• /
• 제45권1호
• /
• pp.14-21
• /
• 2009

This experimental study was carried out to obtain the base data for saving the man power in the fishing operation of largehead hairtail hand line by using the continuous type hand line system with a rotary device which could make a main line move automatically. In order to solve the twists and entangling on the main line happened during operating test, the resistance board was suspended at the end of the main line at sea. As the result, there were no problems of tangling and so on due to up and down moving of a main line. According to the control of a fixed angle of guide roller, it was possible to prevent the main line to be separated from a side roller and a guide roller. In addition, PVC tube between a guide roller and a side roller enabled a main line to be moved smoothly without any entanglement.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권11호
• /
• pp.562-568
• /
• 2001

In this paper, we described the export system to monitor and diagnose 765KV power apparatus. To develop this expert system, we studied the knowledge bases and data bases for 765KV transformer and GIS. In order to make the reliable inference of knowledge base and the good MMI(Man Machine Interface), the data bases were consisted of the tables of power apparatus information, limit level value, measured input data, inference result and diagnosis result. The knowledge base had various rules to infer the conditions of transformer and GIS. We applied both the forward chaining and backward chaining methods to these rules of system for good inferences. This paper describes the applied methods for expert system. Also, this developed system was tested with dissolved gas analyzing result and the result was shown.

• 대한산업공학회지
• /
• 제23권1호
• /
• pp.95-113
• /
• 1997

This paper outlines a framework for a diagnosis of a complex system with uncertain information. Sensor validation ploys a vital role in the ability of the overall system to correctly determine the state of a system monitored by imperfect sensors. Here, emphases are put on the heuristic technology and post-processor for reasoning. Heuristic Sensor Validation (HSV) exploits deeper knowledge about parameter interaction within the plant to cull sensor faults from the data stream. Finally the modified probability distributions and validated data are used as input to the reasoning scheme which is the runtime version of the influence diagram. The output of the influence diagram is a diagnostic mapping from the symptoms or sensor readings to a determination of likely failure modes. Once likely failure modes are identified, a detailed diagnostic knowledge base suggests corrective actions to improve performance. This framework for a diagnostic expert system with sensor validation and reasoning under uncertainty applies in $HEATXPRT^{TM}$ a data-driven on-line expert system for diagnosing heat rate degradation problems in fossil power plants [1].

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.214-217
• /
• 2001

본 연구에서는 PCS 사업자 기지국의 RF부와 안테나를 통합한 하나의 공용 기지국으로 PCS 3사의 서비스를 제공할 수 있는 PCS 공용 기지국 시스템의 구현방안에 대해서 연구하고 제안하였으며, 구현된 시스템에 대한 무선 성능 평가 데이터를 제시하였다. 본 연구에서 PCS 공용 기지국을 구현하기 위해 다중 채널 결합기(multi-channel combiner), 듀플렉서, LNA, 전력 분배기(power divider), 전송라인(feeder line), 공용 안테나 등으로 이루어진 기지국 공용화 모듈을 설계 제작하여 PCS 사업자 기지국에 적용하였다. PCS 공용 기지국에 대한 FER, 호 통계, Ec/Io, 수신전력 등의 주요 무선 성능 파라미터를 대상으로 하는 성능 평가 결과, PCS 3사의 커버리지와 신호 품질이 PCS 사업자 기지국과 동등하다는 것을 확인하였다. PCS 사업자는 공용 기지국의 설치를 통해 설치비 및 운용비를 크게 경감할 수 있을 것으로 생각되고 본 연구의 결과는 효율적이고 경제적인 IMT-2000 서비스망 구축을 위한 기초자료로 활용될 수 있을 것이다.

• 산업공학
• /
• 제16권2호
• /
• pp.229-239
• /
• 2003

The On-Line Analytical Processing (OLAP) tools access data from the data warehouse for complex data analysis, such as multidimensional data analysis, and decision support activities. Current research has lead to new developments in all aspects of data warehousing, however, there are still a number of problems that need to be solved for making data warehousing effective. View maintenance, one of them, is to maintain view in response to updates in source data. Keeping the view consistent with updates to the base relations, however, can be expensive, since it may involve querying external sources where the base relations reside. In order to reduce maintenance costs, it is possible to maintain the views using information that is strictly local to the data warehouse. This process is usually referred to as "self-maintenance of views". A number of algorithm have been proposed for self maintenance of views where they keep some additional information in data warehouse in the form of auxiliary views. But those algorithms did not consider a consistency of materialized views using view self-maintenance. The purpose of this paper is to research consistency problem when self-maintenance of views is implemented. The proposed "conveyor algorithm" will resolved a complete consistency of materialized view using self-maintenance with considering network delay. The rationale for conveyor algorithm and performance characteristics are described in detail.

• 지적과 국토정보
• /
• 제48권1호
• /
• pp.139-151
• /
• 2018

국가기본도 구축은 전국을 두 권역으로 나누어 2년 주기로 항공사진에 의한 수정도화를 실시하는 정시업무와 현지조사와 준공도면 등에 의하여 주요 변화 지형지물을 2주 이내에 수정하는 수시수정업무로 이루어지며, 이 중 국가기본도 수시수정 지형자료추출 업무에 활용되는 부동산종합공부시스템(일사편리) 건물배치도의 경우 지역측지계 기반의 좌표체계로 세계측지계 기반 국가기본도에 활용할 경우 좌표변환오차가 위치오차에 포함되는 문제점을 가지고 있다. 또한 국가기본도는 수치지형도 건물 등록선인 건물 최외곽선(처마선)을 기준으로 등록하고 있고, 지적 및 건축 분야는 건물 중심선을 기준으로 등록하고 있어 건물 객체 관리기준이 불일치하고 있다. 이에 개선방법연구를 위해 부동산종합공부시스템(일사편리)건물배치도 위치에 직접 네트워크 RTK 측량을 실시하여 국가기본도 평면 도화위치 기준과 비교하여 문제점을 분석하였다. 이중 벽체와 처마의 차이가 있는 일반건축물의 경우 위치정보가 상이한 것 이외에 벽체와 처마의 차이만큼 건물 객체 비율에 차이가 있었다. 결론적으로 부동산종합공부시스템(일사편리) 건물배치도를 수시수정업무에 활용하기 위해서는 건물 중심선과 건물 최외곽선(처마선)의 이중레이어의 기초자료 제공이 필요하다 판단된다. 또한, 최신성 및 정확성을 동시에 확보 가능한 유기적인 지도갱신 프로세스에 대한 연구가 필요하다.

• 한국물환경학회지
• /
• 제36권6호
• /
• pp.489-499
• /
• 2020

Effective science-based management of the basin water resources requires an understanding of the characteristics of the streams, such as the baseflow discharge. In this study, the base flow was estimated in the two watersheds with the least artificial factors among the Nakdong River watersheds, as determined using the chemical hydrograph separation technique. The 16-year (2004-2019) discontinuous observed stream flow and electrical conductivity data in the Total Maximum Daily Load (TMDL) monitoring network were extended to continuous daily data using the TANK model and the 7-parameter log-linear model combined with the minimum variance unbiased estimator. The annual base flows at the upper Namgang Dam basin and the upper Nakdong River basin were both analyzed to be about 56% of the total annual flow. The monthly base flow ratio showed a high monthly deviation, as it was found to be higher than 0.9 in the dry season and about 0.46 in the rainy season. This is in line with the prevailing common sense notion that in winter, most of the stream flow is base flow, due to the characteristics of the dry season winter in Korea. It is expected that the chemical-based hydrological separation technique involving TANK and the 7-parameter log-linear models used in this study can help quantify the base flow required for systematic watershed water environment management.

• 한국경영과학회지
• /
• 제31권3호
• /
• pp.1-10
• /
• 2006

In this paper we deal with a cell planning issue arisen in a CDMA based multicast network. In a CDMA based wireless network, a terminal can significantly reduce the bit error rate via the cohesion of data streams from multiple base stations. In this case, multiple base stations have to be operated according to a common time line. The cells whose base stations are operated as such are called soft-combined cells. Therefore, a terminal can take advantage of error rate reduction, if the terminal is in a soft-combined cell and at least one neighboring cell is also soft-combined. However, as soft-combining operation gives heavy burden to the network controller, the limited number of cells can be soft-combined. Our problem us to find a limited number of soft-combined cells such that the benefit of the soft-combining operation is maximized.

• 대한의용생체공학회:의공학회지
• /
• 제10권3호
• /
• pp.343-350
• /
• 1989

A new algorithm classifying ECG Arrhythmia signals using Back-propagation network is proposed. The base-line of ECG signal is detected by high pass filter and probability density function then input data are normalized for learning and classifying. In addition, ECG data are scanned to classify Arrhythmia signal which is hard to find R-wave. A two-layer perceptron with one hidden layer along with error back-propagation learning rule is utilized as an artificial neural network. The proposed algorithm shows outstanding performance under circumstances of amplitude variation, baseline wander and noise contamination.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.797-800
• /
• 1992

Much experience and knowledge is needed in welding because there are many working parameters and quantitative description is difficult. Therefore, introduction of expert system based on such data base has been required. In this study, welding heat and shape of bead was controlled by fuzzy inference with the welding condition, position error and voltage and current error of robot. For this, torch trajectory of robot was generated by modeling the working data with CAD and then welding was carried out through down loading to robot. And working error was controlled by on-line communication.