• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.2
• /
• pp.107-111
• /
• 2003

In the power-line communication systems, there are many factors of noise and attenuation in the power-line channels, because they were designed for not the communication but the power transmission. Also the transfer function of the channels is highly changed with the topology and the load of the power-lines. To cope with these poor channel situation, channel modeling, one of the many studies in progress, is being studied hard. Channel modeling is essential to apply the active schemes to overcome the bad channel(e.g. modulation technique, channel coding, signal coupling & filtering, etc.) to the power-line communications. In this paper, we have realized the statistical model(this model is suggested as the channel modeling method for the power-line channels) that is combined the transfer function with the various noises. And we have compared and examined the results with the measured data. Also we have studied the plan which can effectively establish the channel data base for the channel information consisted of the parameters that are derived from this modeling, and we have studied the plan to utilize the data base.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.57-64
• /
• 2007

RIMS（Rolling Stock Information Maintenance System)　was installed in structure which it can analyze the data base in need of credibility maintenance. So it could accumulate real data without repulsion of working spot. Information system was installed not following to system but following to working spot. The development of RIMS project was started from March 29, 2001 and it has been operating from October 12, 2004 in Chang-dong Car depot for light maintenance in charge subway line4. So substantial data base was accumulated for three years. This study calculated all RAMS data by analyzing data base accumulated in RIMS and used in dada base about credibility maintenance and found investigation of propriety, expectation of the life cycle cost, the improvement plan on credibility of sorts of cars and formation about the cycle of repairing and maintenance. This got MKBSF MKBF and MTBF about devices and sorts of line4 Rolling Stocks for it.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.143-150
• /
• 2007

RIMS（Rolling Stock Information Maintenance System)　was installed in structure which it can analyze the data base in need of credibility maintenance. So it could accumulate real data without repulsion of working spot. Information system was installed not following to system but following to working spot. The development of RIMS project was started from March 29, 2001 and it has been operating from October 12, 2004 in Chang-dong Car depot for light maintenance in charge subway line4. So substantial data base was accumulated for three years. This study calculated all RAMS data by analyzing data base accumulated in RIMS and used in dada base about credibility maintenance and found investigation of propriety, expectation of the life cycle cost, the improvement plan on credibility of sorts of cars and formation about the cycle of repairing and maintenance. This got MKBSF MKBF and MTBF about devices and sorts of line4 Rolling Stocks for it.

• Journal of Biomedical Engineering Research
• /
• v.20 no.3
• /
• pp.275-281
• /
• 1999

Conventional PW Doppler systems suffer from the ambiguity of measured blood velocities due to the spectrum aliasing when the corresponding Doppler frequencies are greater than the Nyquist frequency. Base-line shift is a customary method for dealiasing the Doppler spectrums. I lowever, Doppler audio signals still remain unchanged even when the base-line shift method is applied. This paper de scribes an method for dealiasing both the Doppler spectra and audio signals by using sampling rate expansion, frequency shifting, and filtering poerations. For undirectional flows, the method can increase the maximum detectable Doppler frequency from the Nyquist limit of one-half of the Pulse Repetition Frequency(PRF) to the PRF. Experiments with real data have been performed to verify the proposed method.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.8
• /
• pp.1205-1215
• /
• 2002

The purpose of this study was to develop a production line using simulation method, which could improve work allocation, labor utility and productivity. Using simulation software AIM, a simulation model of functional sports wear assembly line was developed. A functional sports wear production factory were analysed to gather data necessary for this research. Factory layouts, production facilities, work time of each unit jobs were investigated. The data obtained were used as to build a base simulation model. Then, the base simulation model was verified using the obtained data, such as daily productivity. Using simulation method, low alternative production plans were suggested, which were to enhance productivity, and work efficiency and to reduce queue length and throughput time.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2619-2621
• /
• 2002

전력선 통신(Power-Line Communication)은 기본적으로 데이터 전송용이 아닌 전력 전달을 목적으로 설계된 전력선을 매체로 이루어지기 때문에 상당한 잡음과 감쇠 특성을 보이며 또 전력선 topology와 부하의 변화에 따라 전달 함수(transfer function)의 변화도 심하다. 이러한 열악한 채널 특성을 극복하기 위해 전력선 채널에 관한 많은 연구가 진행되고 있으며 그 중에서도 채널 모델링 연구가 활발하게 진행되고 있다. 채널 모델링은, 변복조 방식, 채널 코딩(coding), 커플링(coupling), 필터링(filtering) 등의 적극적인 채널 극복 방안으로서 제시되는 기술을 적용함에 있어서 상당히 중요하다. 본 논문에서는, 채널 모델링 기법으로 제시되고 있는 방식인, 전달 함수 특성과 여러 가지 잡음 특성을 결합한 통계적 모델링 방식[l]을 통해 전력선 채널 모델을 구현하여 실측치와 비교 검토하고, 또 모델링을 통해 얻어지는 파라미터(parameter)를 통해 채널 정보를 효과적으로 Data Base화 할 수 있는 방안에 대해 연구하였으며, 이 Data Base의 활용 방안을 모색하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.545-551
• /
• 2011

In this paper, we described a measurement method of an EIRP(Effective Isotropic Radiated Power) of a WCDMA base station using a pilot channel in line-of-sight environments. Especially we measured it in real base station environments in order to apply this method to domestic base station inspection test. Estimated EIRP results from measured value is -2 dB lower than theoretical values, which is calculated by the data of transmit antenna. The deviation of -2 dB is verified as a polarization mismatch between the base station antenna and a receiver antenna, and it can be calibrated. Therefore, we verified that our measurement method could be an effective tool to measure an EIRP in WCDMA base station inspection test.

• Journal of the Korea Convergence Society
• /
• v.4 no.3
• /
• pp.27-33
• /
• 2013

Conventional bar code has the appearance of line bars and spaces, called as one-dimensional bar code. In contrast, the information in two-dimensional bar code is represented by either a small, rectangular or square with the types of mosaic and Braille. The two-dimensional bar code is much more efficient than one-dimensional bar code because it can allow to store and express large amounts of data in a small space and so far there is also a little information about decoding the Data Matrix in base 256 mode. According to the ISO international standards, there are four kinds of bar code: QR code, Data Matrix, PDF417, and Maxi code. In this paper, among them, we focus on describing the basic concepts of Data Matrix in base 256 mode, how to encode and decode them, and how to organize them in detail. In addition, Data Matrix can be organized efficiently depending on the modes of numeric, alphanumeric characters, and binary system and expecially, we focus on describing how to decode the Data Matrix code by four modes.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1061-1064
• /
• 1987

This paper describes the procedure of recognizing the On-line Korean characters which are written on a graphic tablet. The effective recognition of primitives is performed by the use of stroke unit proceeding instead of coordinate unit under the base of definition of characteristic points which are fit to Korean character through the application of the characteristics of korean characters & input data on graphic tablet.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.4 no.1
• /
• pp.1-16
• /
• 2003

Objectives : The purpose of this study is researching for possibility that Moire topography be applied in group school screening for scoliosis known school health problem, and find acceptable method of early detection and early treatment for scoliosis Methods : The authors practiced Moire topography for primary & middle school 1,895 students[male 976, female 919] in Jeonju, korea in 2001. After we distinguished students who had abnormal finding in Moire topography and then re-examined spinal X-ray analysis. The data was analysed and evaluated statistically Results : According to this research, the abnormal finding in Moire topography was 53.7% (1,018 students), and students needed X-ray re-examination were 11.2% (213 students). Students diagnosed scoliosis by X-ray re-examination were 1.8%. According to statistical analysis, interval between vertical base line of pelvis and vertical base line of neck, gap between left distance and right distance to the vertical base line of pelvis and difference of contour lines have strong correlations with deformity degree of the body surface examined by Moire. Conclusions : Following this research, throughout early detection for scoliosis by Moire topography could reduce exposure from scoliosis radiographs, and could detect trunk asymmetry that couldn't be found existing X-ray examination, so it made selecting students under observation who have bad posture possible.