• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.237-240
• /
• 1989

This paper deals with the expert system for power system recognition of energized and deenergized system using circuit breaker information. The basic idea is isolating the system with the system matrix representing the system configuration and the states of the circuit breakers. The knowledge base is composed of these isolated systems and decision rules. The isolated system with the sources is recognized as the energized system and the system without the source as the deenergized system. The rules use the system matrix and the the inference scheme is simplified in a great deal. Above all, the overall searching labor of the rules is independent on the system size and it is possible to expand into the real system and the real time restoration can be carried out easily. The expert system is written in PROLOG.

• 한국전산구조공학회논문집
• /
• 제21권6호
• /
• pp.597-605
• /
• 2008

본 논문에서는 지진으로부터 구조물을 효과적으로 보호하기 위하여 MR 엘라스토머(MRE)를 이용한 새로운 형태의 스마트 기초격리 시스템을 제안하고, 이에 대한 내진성능을 파악하였다. MRE는 자성물질을 포함한 실리콘 혹은 고무로써 자기장에 의해 강성이 변하는 스마트 재료이다. 기초격리 시스템은 토목 및 건축분야에서 구조물의 내진성능 향상을 위해 가장 널리 쓰이는 장치로 지반과 구조물을 격리시켜 구조물에 가해지는 입력 하중을 감소시켜주는 장치이다. 기존 수동형태의 기초격리 장치는 다양한 입력하중에 대한 적응성이 부족하고 기초격리 장치에서의 과도한 변위 등의 단점이 있는 반면, 새로 제안한 시스템은 제어 가능한 강성범위가 넓어 이를 개선할 수 있다. MRE를 이용한 기초격리 장치의 성능을 확인하기 위하여 기초격리 장치를 도입한 단층 및 5층의 건물에 대해 다양한 역사지진 하중을 이용하여 수치해석을 수행하였다. 수치해석 결과, 제안된 시스템은 기존 수동형태의 시스템에 비해 구조물의 응답 및 기초격리장치의 변위를 감소시키는 데 탁월한 효과가 있음을 확인하였다.

• Earthquakes and Structures
• /
• 제19권4호
• /
• pp.261-272
• /
• 2020

Recent severe earthquakes in and around the vital public places worldwide indicate the severe vulnerability of ground excitation to be assailed. Reducing the effect of seismic lateral load in structural design is an important conception. Essentially, seismic isolation is required to shield the superstructure in such a way that the building superstructure would not move when the ground is shaking. This study explores the effectiveness, design, and practical feasibility of base isolation systems to reduce seismic demands on buildings of varying elevations. Thus, static and dynamic analyses were conducted based on site-specific bi-directional earthquakes for base-isolated as well as fixed-based buildings. Remarkably, it was discovered that isolators used in low-rise to high-rise structures tend to significantly decrease the structural responses of seismic prone buildings. The higher allowable horizontal displacement induces structural flexibility and ensure good structural health of the building stories. Reinforcement from vertical and horizontal members can be reduced in significant amounts for BI buildings. Thus, although incorporating base isolators increases the initial outlay, it considerably diminishes the total structural cost.

• Nuclear Engineering and Technology
• /
• 제46권5호
• /
• pp.581-594
• /
• 2014

A feasibility study on the seismic design of nuclear reactor buildings with application of a seismic isolation system is introduced. After the Hyogo-ken Nanbu earthquake in Japan of 1995, seismic isolation technologies have been widely employed for commercial buildings. Having become a mature technology, seismic isolation systems can be applied to NPP facilities in areas of high seismicity. Two reactor buildings are discussed, representing the PWR and BWR buildings in Japan, and the application of seismic isolation systems is discussed. The isolation system employing rubber bearings with a lead plug positioned (LRB) is examined. Through a series of seismic response analyses using the so-named standard design earthquake motions covering the design basis earthquake motions obtained for NPP sites in Japan, the responses of the seismic isolated reactor buildings are evaluated. It is revealed that for the building structures examined herein: (1) the responses of both isolated buildings and isolating LRBs fulfill the specified design criteria; (2) the responses obtained for the isolating LRBs first reach the ultimate condition when intensity of motion is 2.0 to 2.5 times as large as that of the design-basis; and (3) the responses of isolated reactor building fall below the range of the prescribed criteria.

• Earthquakes and Structures
• /
• 제9권3호
• /
• pp.657-671
• /
• 2015

The level of ductility is determined by depending on the intended use of the building, the region's seismic characteristics and the type of structural system when buildings are planned by engineers. Major portion of seismic energy is intended to be consumed in the plastic zone in structural systems of high ductility, so the occurrence of damages in load bearing and non-load bearing structural elements is accepted in planning stage under severe earthquakes. However, these damages must be limited among specific values in order not to endanger buildings in terms of the bearing capacity. Isolators placed between the basement and upper structure make buildings behave elastically by reducing the effects of seismic loads and improving seismic performance of building significantly. Thus, damages can be limited among desired values. In this study, the effectiveness of seismic isolation is investigated on both fixed based and seismic isolated models of a hospital building with high ductility level with regard to lateral displacements, internal forces, structural periods and cost of the building. Layered rubber bearings are interposed between the base of the structure and foundation. Earthquake analysis of the building are performed using earthquake records in time domain (Kocaeli, Loma Prieta and Landers). Results obtained from three-dimensional finite element models are presented by graphs and tables in detail. That seismic isolation reduces significantly the destructive effects of earthquakes on structures is seen from the results obtained by seismic analysis.

• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.79-89
• /
• 2000

In this paper, the seismic analysis and the modeling techniques have been introduced for aseismic performances assessment, when seismic isolation bearings are applied on a real bridge. Nonlinear time-history analysis is carried out using finite element analysis program. In this study, EI Centro earthquake(1940, N00W), Mexico earthquake(1985, N90W), and earthquake simulation from modified SIMQKE are used as earthquake ground excitations. The seismic response of seismically isolated bridge is compared with that of a bridge using conventional Pot Bearings, after obtaining the displacements of the deck, the deformations of the piers, shear forces and moments of the bottoms of the piers. The analytical analysis results show that seismic isolation bearing, especially seismic isolation bearings with sliding mechanism, could reduce earthquake forces.

• Journal of Pharmaceutical Investigation
• /
• 제26권4호
• /
• pp.257-261
• /
• 1996

The seeds of Zizyphus Jujuba have been used as an antianxiety agent for the treatment of insomnia from the earliest times. Sanjoinine-A, isolated from the seeds of Zizyphus Jujuba, have been found to have a minor tranquilizer activity. However this drug is poorly soluble in water. In order to increase the dissolution rate of sanjoinine-A, solid dispersions with PVP-MC and inclusion complex with ${\beta}-cyclodextrin$ were prepared and evaluated. All of these systems increased the dissolution rate of sanjoinine A comparing with sanjoinine-A free base. From pH-rate profile of sanjoinine-A at $60^{\circ}C$, it was found that sanjoinine A was relatively stable in acidic solution, but unstable in basic solution.

• Smart Structures and Systems
• /
• 제15권1호
• /
• pp.81-97
• /
• 2015

Recently, a new output-only modal identification method based on time-frequency independent component analysis (ICA) has been developed by the authors and shown to be useful for even highly-damped structures. In many cases, it is of interest to identify the complex modes of structures with non-proportional damping. This study extends the time-frequency ICA based method to a complex ICA formulation for output-only modal identification of non-proportionally-damped structures. The connection is established between complex ICA model and the complex-valued modal expansion with sparse time-frequency representation, thereby blindly separating the measured structural responses into the complex mode matrix and complex-valued modal responses. Numerical simulation on a non-proportionally-damped system, laboratory experiment on a highly-damped three-story frame, and a real-world highly-damped base-isolated structure identification example demonstrate the capability of the time-frequency complex ICA method for identification of structures with complex modes in a straightforward and efficient manner.

• Journal of Dairy Science and Biotechnology
• /
• 제42권1호
• /
• pp.18-22
• /
• 2024

In this study, we performed whole-genome sequencing of Levilactobacillus brevis KL251 (KL251) isolated from kimchi. The KL251 genome, characterized by a circular chromosome spanning 2,345,062 base pairs with a GC content of 45.78%, was analyzed. KL251 contains 2,275 coding DNA sequences (CDSs), 56 transfer RNAs (tRNAs), and 4 ribosomal RNAs (rRNAs). Genes associated with gamma-aminobutyric acid (GABA) production and CRISPR-Cas systems were identified and could potentially be used for GABA synthesis and defense against foreign DNA. Additionally, the presence of functional genes involved in isoprenoid biosynthesis, glutathione generation, and redox sensing showed that cellular metabolism and stress responses were important characteristics of this genome. These genomic findings suggest that the KL251 strain could potentially have several applications, including food fermentation, probiotics, dairy product starters, and the development of health-enhancing products.

• Smart Structures and Systems
• /
• 제16권4호
• /
• pp.701-723
• /
• 2015

Friction isolators are one of the most important types of bearings used to mitigate damages of earthquakes. The adaptive behavior of these isolators allows them to achieve multiple levels of performances and predictable seismic behavior during different earthquake hazard levels. There are three main types of friction isolators. The first generation with one sliding surface is known as Friction Pendulum System (FPS) isolators. The double concave friction pendulum (DCFP) with two sliding surfaces is an advanced form of FPS, and the third one, with fully adaptive behavior, is named as triple concave friction pendulum (TCFP). The current study has been conducted to investigate and compare seismic responses of these three types of isolators. The structure is idealized as a two-dimensional single degree of freedom (SDOF) resting on isolators. The coupled differential equations of motion are derived and solved using state space formulation. Seismic responses of isolated structures using each one of these isolators are investigated under seven near fault earthquake motions. The peak values of bearing displacement and base shear are studied employing the variation of essential parameters such as superstructure period, effective isolation period and effective damping of isolator. The results demonstrate a more efficient seismic behavior of TCFP isolator comparing to the other types of isolators. This efficiency depends on the selected effective isolation period as well as effective isolation damping. The investigation shows that increasing the effective isolation period or decreasing the effective isolation damping improves the seismic behavior of TCFP compared to the other isolators. The maximum difference in seismic responses, the base shear and the bearing displacement, for the TCFP isolator are calculated 26.8 and 13.4 percent less than the DCFP and FPS in effective isolation damping equal to10%, respectively.