• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.89-95
• /
• 2013

In this work, the evaluation of swirl nozzle injector performance was conducted by investigating effective area ($A_{eff}$), injection mass ($m_{inj}$), injection rate ($Q_{inj}$), and injection delay ($t_{delay}$) under various test conditions. To achieve these, fuel injection analysis system which was composed of fuel supply system, injection system, and control system was installed. At the same time, the swirl nozzle that had 12 orifice hole with $120^{\circ}$ injection angle was used in this work. It was revealed that the difference of injection mass ($m_{inj}$) between base and swirl nozzle injector increased as the injection pressure ($P_{inj}$) and energizing duration ($t_{eng}$) decreased under the same test conditions. The maximum injection rate ($Q_{inj}$) of swirl nozzle injector was higher than base nozzle injector about 2~5%. The injection performance of swirl nozzle was better than base nozzle at low injection pressure ($P_{inj}$) and short energizing duration ($t_{eng}$) conditions.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.4
• /
• pp.295-299
• /
• 2002

The esterification of alcohols with acetic acid, lactic acid and citric acid was carried out in batch during the second distillation. Effect of various parameters, e.g. pH of reactant base spirit, temperature of distillation, time of distillation were studied. The parameter of distillation temperature was modified by atmospheric distillation and pressure distillation. The pressure(1.9 atm.) distillation was used in order to react and distill at high temperature. Compared with the base spirit concentration, ethyl acetate, ethyl lactate and iso-amyl acetate in esterification distillate increased by 2,890%, 6,410% and 52%, respectively. Major factors of the esterification with organic acids in distilled spirit making were molecular weight of the organic acid and pH of reactant base spirit.

• Journal of Yeungnam Medical Science
• /
• v.5 no.1
• /
• pp.105-110
• /
• 1988

The study was undertaken to determine the most adequate tidal volume when used volume preset ventilator during anesthesia. The thirty patients were received controlled mechanical ventilation with constant inspiratory pressure of 10cmH2O and respiratory frequency of 12/minute. The results were as follows : 1) The PH was $7.39{\pm}0.01$ and it is within normal limit. 2) The $PaCO_2$ was $34.0{\pm}0.6$ mmHg and it is a slightly hyperventilatory state. 3) The $PaO_2$ was $228.0{\pm}8.2$ mmHg. 4) The Buffer base was $20.7{\pm}0.3mEql$ and it is a slightly buffer base deficient state. From the above results. We concluded that if patients were fully relaxed during general anesthesia, it is desirable to maintain the inspiratory pressure of anesthetic mechanical ventilator to $10cmH_2O$ for adeguate alveolar ventilation.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.4
• /
• pp.139-144
• /
• 2013

c-BN(cubic boron nitride) is known to have extremely high hardness next to diamond, as well as very high thermal and chemical stability. The c-BN in the form of film is useful for wear resistant coatings where the application of diamond film is restricted. However, there is less practical application because of difficult control of processing variables for synthesis of c-BN film as well as unclear mechanism on formation of c-BN. Therefore, in the present study, the structural characterization of c-BN thin film were investigated using $B_4C$ target in r.f. magnetron sputtering system as a function of processing variables. c-BN films were coated on Si(100) substrate using $B_4C$ (99.5% purity). The mixture of nitrogen and argon was used for carrier gas. The deposition processing conditions were changed with substrate bias voltage, substrate temperature and base pressure. Fourier transform infrared microscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) were used to analyze crystal structures and chemical binding energy of the films. In the case of the BN film deposited at room temperature, c-BN was formed in the substrate bias voltage range of -400 V~ -600 V. Less c-BN fraction was observed as deposition temperature increased and more c-BN fraction was observed as base pressure increased.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.2
• /
• pp.65-70
• /
• 2008

This study deals with the friction welding of SKH55 and SM45C; The friction time was variable conditions under the conditions of spindle revolution 2,000rpm, friction pressure of 190MPa, upset pressure of 270MPa and upset time of 2.0 seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests were studied, and so the results were as follows. 1. When the friction time is 1.0 seconds, the tensile strength of friction welds was 926MPa, which is around as much as 84% of the tensile strength of base metal(SKH55), the bending strength of friction welds was 1,542MPa, which is around as much as 80% of the bending strength of base metal(SKH55), the shear strength of friction welds was 519MPa, which is around as much as 70% of the shear strength of base metal(SKH55). 2 According to the hardness test, the hardness distribution of the weld interface was formed from 964Hv to 254Hv. HAZ(Heat Affected Zone) was formed from the weld interface to 1.5mm of SKH55 and 2mm of SM45C.

• Wind and Structures
• /
• v.35 no.5
• /
• pp.297-307
• /
• 2022

Over the past few decades, the use of wind tunnels has been increasing as a result of the rapid growth of cities and the urge to build taller and non-typical structures. While the accuracy of a wind tunnel study on a tall building requires several aspects, the precise extraction of wind pressure plays a significant role in a successful pressure test. In this research study, a low-cost expandable synchronous multi-pressure sensing system (SMPSS) was developed and validated at Ryerson University's wind tunnel (RU-WT) using electronically scanning pressure sensors for wind tunnel tests. The pressure system consists of an expandable 128 pressure sensors connected to a compact data acquisition and a host workstation. The developed system was examined and validated to be used for tall buildings by comparing mean, root mean square (RMS), and power spectral density (PSD) for the base moments coefficients with the available data from the literature. In addition, the system was examined for evaluating the mean and RMS pressure distribution on a standard low-rise building and were found to be in good agreement with the validation data.

• Journal of Trauma and Injury
• /
• v.25 no.4
• /
• pp.166-171
• /
• 2012

Purpose: In patients with traumatic hemoperitoneum or pelvic bone fracture who underwent angiography and embolization, we want to find the prognostic factors related with mortality. Methods: Patients(333 patients) who visited our hospital with traumatic injury from March 2008 to April 2012 were included in this study. Only 37 patients with traumatic hemoperitoneum or pelvic bone fracture underwent angiography and embolization. A retrospective review was conducted, and Glasgow coma scale (GCS), Revised trauma score (RTS), Injury severity score (ISS), initial laboratory finding and time interval, the amount of transfusion from the arrival at the ER to the start of embolization, and the vital signs before and after procedure were checked. Stastical analysis was conducted using the Chi square and Mann-Whitney U test. Results: In univariate analysis, the amount of transfusion, the base deficit before procedure, the systolic blood pressure before and after the procedure, the GCS, the RTS and the ISS were significantly associated with prognosis. In the multivariate analysis, the ISS and the base deficit had significant association with prognosis. Of the 37 patients who underwent angiography and embolization, 31 patients needed not additional procedure (Group A) while the other 6 patients needed an additional procedure (Group B). After procedure, a statistically significant higher blood pressure was observed in Group A than in Group B. As to the difference in blood pressure before and after the procedure, a statistically significant decrease in systolic blood pressure was observed in Group B, but an increase was observed in Group A. Conclusion: In traumatic hemoperitoneum or pelvic bone fracture patients who underwent angiography and embolization, GCS, ISS, RTS, transfusion amount before the procedure, initial base deficit and systolic blood pressure were factors related to mortality. When patients who underwent angiography and embolization only were compared with patients who underwent re-embolization or additional procedure after the first embolization, an increase in systolic blood pressure after embolization was a prognostic factor for successful control of bleeding.

• 한국석유지질학회:학술대회논문집
• /
• spring
• /
• pp.56-65
• /
• 1998

Methane hydrate is ice-like solid compound consisting of mainly methane and water, and is stable under specific low temperature and high pressure conditions (HSZ : methane hydrate stability zone) that occurs in permafrost regions and in the ocean floor sediments. Geophysical survey was implemented in the southern area of the East Sea, and the HSZ of the study area is determined by the temperature, pressure and local heat flow obtained from the survey and well data. In the study area, methane hydrates could exist in the sediments below the water depths of about $300{\cal}m$, and the base of HSZ is about 600m beneath the seafloor. The acoustically blanking zones in the sediment and phenomena of gas seepage were detected from the seismic section. These sediments have the sufficient physical condition for the formation of methane hydrate. The temperature and pressure conditions were experimentally measured for the dissociation of methane and propane hydrates in Pure water. Equilibrium conditions of methane and propane hydrates were obtained in the pressure range up to 19050Kpa and 401.3Kpa. Under same temperature condition, propane hydrate was dissociated at lower pressure than that of methane hydrate.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.134-140
• /
• 2003

The film sensor is used for measuring pressure distribution at planar area, especially at a small space or gap. The present paper deals with the development of film type sensors and system for pressure distribution measuring. The developed system is consist of (1)film sensor with 40/sup */40 array, (2)PCI interface card with maximum sampling rate of 100㎐, and (3)software for data processing and real-time display. The contact pressure test of wiper blade and front glass of vehicle was performed with wiper blade by 40cm. Generally spring force of wiper arm is designed at 0.7∼1kN. Test results of total force was 9.4N and 7.1N in each driver and passenger toward. The paper suggested possibility for base definition in wiper design. A windshield wiper blade experiment revealed that the system successfully measured the contact force distribution during static state, showing the usefulness of the developed system.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.09a
• /
• pp.75-82
• /
• 2002

The Mononobe-Okabe method is generally used to evaluate the dynamic earth force for the seismic design of retaining walls. However, the Mononobe-Okabe method does not consider the effects of the dynamic interactions between the backfill soil and the wall. In fact, a phase difference exists between the inertia force and the seismic earth pressure. In this study, shaking table tests were peformed on gravity walls retaining dry backfill sand to analyze the influence of several parameters (the unit weight of the wall, the input acceleration and base friction) on the development of the seismic earth pressure. The experiments revealed that the magnitude of the inertia force mobilized during seismic loading affected the seismic earth pressure. The difference in the phase angles between the inertia force and the seismic earth pressure was retained at 180 degrees before the wall failed but its magnitude changed significantly as the wall began to fail.