• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.31-41
• /
• 2010

This research aims to present a methodological approach for repurposing small pockets of national/public lands, which can be constructed as parks, through an investigation of the present status of these areas of national/public lands that are scattered around Busan Megalopolis as well as the suitability of their construction. In order to attain this, this study looked at the present status of these small areas of national/public lands by utilizing a national land, city land list (lot number), land registration map and satellite image of Busan Megalopolis, and evaluating their suitability as parks through GIS analysis and classification. As a result, these small areas of lands with the potential to be turned into parks include 516 spots($375,934m^2$). Geographically, 39% of these areas are located on flat land and are the most scattered. 260 places met the requirements for optimal placement for conversion, while convenience included 305 places, and availability 267 places. The most optimal of the places meeting such standards include 61 spots. The characteristics of these areas of national/public lands include being below $500m^2$, with flatlands and open areas above a 5' grade occupy the highest ratio, accounting for 25.4% of the land studied. These results have offered a methodology for a GIS DB, which can visualize the data for a positive utilization be yond the simple level of the maintenance/preservation of national/public lands and provide basic data for the utilization and management of these types of areas in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1311-1321
• /
• 2010

Sensor network is used to obtain sensing data in various area. The interval to sense the events depends on the type of target application and the amounts of data generated by sensor nodes are not constant. Many applications exploit long sensing interval to enhance the life time of network but there are specific applications that requires very short interval to obtain fine-grained, high-precision sensing data. If the number of nodes in the network is increased and the interval to sense data is shortened, the amounts of generated data are greatly increased and this leads to increased amount of packets to transfer to the network. To transfer large amount of packets fast, it is necessary that the delay between successive packet transmissions should be minimized as possible. In this paper, we propose SET(SendDoneEventbasedTransmission Technique)which reduces the delay between successive packet transmissions by using SendDone Event which informs that a packet transmission has been completed. In SET, the delay between successive packet transmissions is shortened very much since the transmission of next packet starts at the time when the transmission of previous packet has completed, irrespective of the transmission time. Therefore SET could provide high packet transmission rate given large amount of packets.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.554-561
• /
• 2017

IoT (Internet of Things) devices are often located in environments where indoor or underground, signals are difficult to reach. In addition, the transmission power is low, the base station should be designed to be able to receive signals even at low reception sensitivity. For this reason, a device having a poor channel condition can be transmitted at a low data rate using a low coding rate or repetition. When the coverage class is divided according to the channel condition and the data rate, the packet length may vary from one coverage class to another, and the performance of the slotted aloha random access may be degraded. We will focus on two methods of using shared-resource and seperate resources among multiple slotted aloha methods. In particular, when devices with different coverage classes use shared resources, performance of a device with a bad channel condition may deteriorate. Conversely, when using separate resources for each coverage class, there is a problem that congestion may occur which increases the number of devices that perform random access to one resource area. In this paper, we propose some methods to overcome this problem. This study is mainly focused on MTC devices, and is considered to be a high possibility of future development.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.5
• /
• pp.630-641
• /
• 2002

The purpose of this study is to suggest the standard of bodytype which offers various data with regard to three-dimensional characteristics of body, and which offers the criterion for the sizes and shapes to interpret various bodytypes, to estimate filling, and to construct ready-made clothing. In this study, standard bodytype was defined as a typical type with beautiful proportion and shape which a large number of people have, too. In order to continue this study, there were two ways of analyzing bodytypes of subjects in the view of statistics and beauty. We primarily carried on statistical analysis in this report. Taken as a sample, the subjects were ninety-seven females who were between the ages of 18 and 24 years o1d. They were measured on November 1999. The data of seven hundred and few females, 18∼24 year-old, from the National Somatometry Survey of 1997 were used for analysis, too. Three kinds of classification methods were used for statistical analysis. The first method was based on the lateral view of the body, the second was based on the Factor and Cluster analysis of the photographic measurements of each of the anterior and lateral body, and the third was based on the Factor and Cluster analysis of the anthropometric measurements of the whole body. From the analysis on the distribution of R hrer Index the difference of width, the difference of depth, the proportion of height and head height, the High-frequency Proportion(H.P.)range were selected. The straight type from the lateral view, High-frequency type from each method, and subjects in H.P. range were compared with each other. As the result, it was confirmed that it is proper to base on the size and shape of subjects in H.P. range to analyze the standard bodytype.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.173-183
• /
• 1983

To evaluate growing degree days(GDD) as an index of growth duration of rice plants, 30 days old seedlings of 16 japonica and 14 indica/japonica varieties were transplanted six times from May 10 at the 10-day intervals at Gyeongsan in 1982. The number of days from transplanting to heading decreased as transplanting dates delayed in all japonica varietie and 4 indica/japonica varieties but that of 10 indica/japonica varieties decreased up to June 9 or June 19 transplantings and then it levelled off or increased with further delay of transplanting. However, GDD requirement was similar among transplanting dates at appropriate base temperatures; GDD could be better than calendar day system to classify maturity of varieties especially grown in a wide range of climatic conditions. Required GDD from transplanting to heading of all indica/japonica and early japonica varieties showened a smaller coefficient of variation (CV) compared to longer season japonica varieties. Among GDD methods, an accumulation of daily Max + Min temp./2 -$l0^{\circ}C$ showed the smallest CV for the duration from transplanting to heading, but for ripening period GDD calculated with adjusted maximum temperature when it was higher than $30^{\circ}C$ showed the best results. Heading date did not affect required GDD for maturity of japonica varieties, but in indica/japonica varieties GDD decreased as heading date delayed; at late transplantings ripening period of indica/japonica varieties was less extended compared to japonica varietes due to a decrease in grain weight.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.55 no.2
• /
• pp.151-158
• /
• 2010

Camelina sativa L., known as popular names "gold-of-pleasure" or "false flax" is an alternative oilseed crop that can be grown under different climatic and soil conditions. Up to date, however, the genomic information of Camelina has not been studied in detail. Therefore, a cDNA library was constructed and characterized from young leaves. The constructed cDNA library incorporated of 1334 cDNA clones and the size of the insertion fragments average was 736 base pair. We generated a total of 1269 high-quality expressed sequence tags (ESTs) sequences. The result of cluster analysis of EST sequences showed that the number of unigene was 851. According to subsequent analysis, the 476 (55.9%) unigenes were highly homologous to known function genes and the other 375 (44.1%) unigenes were unknown. Remaining 63 (7.4%) unigenes had no homology with any other peptide in NCBI database, indicating that these seemed to be novel genes expressed in leaves of Camelina. The database-matched ESTs were further classified into 17 categories according to their functional annotation. The most abundant of categories were "protein with binding function or cofactor requirement (27%)", "metabolism (11%)", "subcellular localization (11%)", "cellular transport, transport facilities and transport routes (7%)", "energy (6%)", "regulation of metabolism and protein function (6%)". Our result in this study provides an overview of mRNA expression profile and a basal genetic information of Camelina as an oilseed crop.

• Economic and Environmental Geology
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2009

The Haman mineralized area is located within the Cretaceous Gyeongsang Basin along the southeastern part of the Korean peninsula. Almost all occurrences in the Haman area are representative of copper-bearing polymetallic hydrothermal vein-type mineralization. Within the area are a number of fissure-filling hydrothermal veins which contain tourmaline, quartz and carbonates with Fe-oxide, base-metal sulfide and sulfosalt minerals. The Gunbuk, Jeilgunbuk and Haman mines are each located on such veins. The ore and gangue mineral paragenesis can be divided into three distinct stages: Stage I, tourmaline + quartz + Fe-Cu ore mineralization; Stage II, quartz + sulfides + sulfosalts + carbonates; Stage III, barren calcite. Equilibrium thermodynamic data combined with mineral paragenesis indicate that copper minerals precipitated mainly within a temperature range of $350^{\circ}C$ to $250^{\circ}C$. During early mineralization at $350^{\circ}C$, significant amounts of copper ($10^3$ to $10^2\;ppm$) could be dissolved in weakly acid NaCl solutions. For late mineralization at $250^{\circ}C$, about $10^0$ to $10^{-1}\;ppm$ copper could be dissolved. Equilibrium thermodynamic interpretation indicates that the copper in the Haman-Gunbuk systems could have been transported as a chloride complex and the copper precipitation occurred as a result of cooling accompanied by changes in the geochemical environments ($fs_2$, $fo_2$, pH, etc.) resulting in decrease of solubility of copper chloride complexes.

• Journal of Biomedical Engineering Research
• /
• v.29 no.1
• /
• pp.32-39
• /
• 2008

This paper reports on a realtime OS based master-slave configuration robot control system for laparoscopic surgery robot which enables telesurgery and overcomes shortcomings with conventional laparoscopic surgery. Surgery robot system requires control system that can process large volume information such as medical image data and video signal from endoscope in real-time manner, as well as precisely control the robot with high reliability. To meet the complex requirements, the use of high-level real-time OS (Operating System) in surgery robot controller is a must, which is as common as in many of modem robot controllers that adopt real-time OS as a base system software on which specific functional modules are implemened for more reliable and stable system. The control system consists of joint controllers, host controllers, and user interface units. The robot features a compact slave robot with 5 DOF (Degree-Of-Freedom) expanding the workspace of each tool and increasing the number of tools operating simultaneously. Each master, slave and Gill (Graphical User Interface) host runs a dedicated RTOS (Real-time OS), RTLinux-Pro (FSMLabs Inc., U.S.A.) on which functional modules such as motion control, communication, video signal integration and etc, are implemented, and all the hosts are in a gigabit Ethernet network for inter-host communication. Each master and slave controller set has a dedicated CAN (Controller Area Network) channel for control and monitoring signal communication with the joint controllers. Total 4 pairs of the master/slave manipulators as current are controlled by one host controller. The system showed satisfactory performance in both position control precision and master-slave motion synchronization in both bench test and animal experiment, and is now under further development for better safety and control fidelity for clinically applicable prototype.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2507-2517
• /
• 2015

In this research, we aim to analyze the trend of Huawei's PCT patent applications. As a result of analyzing Huawei's PCT patents by dividing temporal spans into three periods - the early 2000s, the late 2000s, and the early 2010s -, the following characteristics have been observed. First, the number of PCT patent applications has conspicuously increased from the early 2000s to the late 2000s and this trend has continued during the early 2010s. Second, in terms of a core technological field, whereas Huawei focused on the development of technologies in the 'H04L: transmission of digital information' sector during the early/late 2000s, it changed this field to the 'H04W: wireless communication networks' sector during the early 2010s. Lastly, in the case of the patent maps, it was found that while general communications technologies, as expressed with such keywords as 'user' and 'network,' were actively developed during the early/late 2000s, mobile phone-related technologies grasped this leading position, as shown with the keywords including 'user equipment,' 'base station,' and 'MME,' during the early 2010s. It was also noticeable that Huawei filed LTE-related patent applications more actively than Apple and Samsung Electronics, which implies that it will presumably pioneer the global market more aggressively than its competitors in the future.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.2
• /
• pp.19-29
• /
• 2016

Disasters that occur most frequently in rural areas are drought, flood, damages from wind and cold weather. Among these, damages from storm and flood and drought are the main disasters and recently, these are occurring on a large scale due to unusual weather conditions. Under such circumstances, projects and researches on disasters in rural areas are under way but they are mostly targeting one area or making approaches focusing on repair facilities, maintenance project of facilities in small streams, and disaster management, so there have not been enough studies on the current status of overall damaged facilities in the rural areas. Against this backdrop, through the analysis of the current status of damaged facilities due to storm and flood in rural areas, this study aims to provide base data for policies needed for disaster recovery planning and maintenance work of rural areas. For the analysis of damaged facilities due to storm and flood in rural areas, using the annual report on disasters issued by Ministry of Public Safety and Security and based on the occurrence rate of estimated damage in each city and district for the past 10 years(2004~2013), 8 areas with the highest number of occurrence and cost of damage were found from each province and target areas were selected. Then, regarding the selected target areas, the General Plan for Reducing Damages from Storm and Flood, which is the report on top-level plan for preventing disasters, was secured and the current status of damaged facilities were analyzed. After organizing the analysis of current status, the tendency of damaged facilities due to storm and flood in rural areas, the items of damaged facilities depending on the types of storm and flood damages, and risk factors were suggested. Based on this result, in order to generalize the results of follow-up researches, it is thought that disaster recovery planning and establishing the system of remodeling items necessary for maintenance work would be possible by analyzing damage investigation items recorded in additional researches on rural areas, researches on natural disasters, and recovery plan instructions and by conducting on-site investigation on the damaged villages from storm and flood in rural areas.