• Journal of the Korean Solar Energy Society
• /
• v.32 no.4
• /
• pp.24-33
• /
• 2012

Recently, finishing materials at spandrel area, a part of curtain-wall system, are gradually forced to improve thermal insulation performance in order to enhance the building energy efficiency. Also, Building Integrated Photovoltaics(BIPV) systems have been installed in the exterior side of the spandrel area, which is generally composed of windows. Those BIPVs aim to achieve high building energy efficiency and supply the electricity to building. However, if transparent BIPV module is combined with high insulated spandrel, it would reduce the PV efficiency for two major reasons. First, temperature in the air space, located between window layer and finishing layer of the spandrel area, can significantly increase by solar heat gain, because the space has a few air density relative to other spaces in building. Secondly, PV has a characteristics of decreased Voltage(Voc and Vmp) with the increased temperature on the PV cell. For these reasons, this research analyzed a direct interrelation between PV Cell temperature and electricity generation performance under different insulation conditions in the spandrel area. The different insulation conditions under consideration are 1) high insulated spandrel(HIS) 2) low insulated spandrel(LIS) 3) PV stand alone on the ground(SAG). As a result, in case of 1) HIS, PV temperature was increased and thus electricity generation efficiency was decreased more than other cases. To be specific, each cases' maximum temperature indicated that 1) HIS is $83.8^{\circ}C$, 2) LIS is $74.2^{\circ}C$, and 3) SAG is $66.3^{\circ}C$. Also, each cases yield electricity generation like that 1) HIS is 913.3kWh/kWp, 2) LIS is 942.8kWh/kWp, and 3) SAG is 981.3kWh/kWp. These result showed that it is needed for us to seek to the way how the PV Cell temperature would be decreased.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.4
• /
• pp.420-425
• /
• 1999

The maximum demand controller is an electrical equipment installed at the consumer side of power system for monitoring the electrical energy consumed during every integrating period and preventing the target maximum demand (MD) being exceeded by disconnecting sheddable loads. By avoiding the peak loads and spreading the energy requirement the controller contributes to maximizing the utility factor of the generator systems. It results in not only saving the energy but also reducing the budget for constructing the natural base facilities by keeping thc number of generating plants ~ninimumT. he conventional MD controllers often bring about the large number of control actions during the every inteyating period and/or undesirable loaddisconnecting operations during the beginning stage of the integrating period. These make the users aviod the MD controllers. In this paper. fuzzy control technique is used to get around the disadvantages of the conventional MD control system. The proposed MD controller consists of the predictor module and the fuzzy MD control module. The proposed forecasting method uses the SOFM neural network model, differently from time series analysis, and thus it has inherent advantages of neural network such as parallel processing, generalization and robustness. The MD fuzzy controller determines the sensitivity of control action based on the time closed to the end of the integrating period and the urgency of the load interrupting action along the predicted demand reaching the target. The experimental results show that the proposed method has more accurate forecastinglcontrol performance than the previous methods.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.6
• /
• pp.67-77
• /
• 2018

Currently, there are many problems due to the decline in school-age population. Moreover, Korea has the largest number of universities compared to the population, and the university enrollment rate is also the highest in the world. As a result, the minimum student retention rate required for the survival of each university is becoming increasingly important. The purpose of this study was to examine the effects of reducing the number of graduates of education and the social climate that prioritizes employment. And to determine what the basic direction is for students to manage the student retention rate, which can be maintained from admission to graduation, to determine the optimal input variables, Based on the input parameters, we will make associative analysis using apriori algorithm to collect training data that is most suitable for maintenance rate management and make base data for development of the most efficient Deep Learning module based on it. The accuracy of Deep Learning was 75%, which is a measure of graduation using decision trees. In decision tree, factors that determine whether to graduate are graduated from general high school and students who are female and high in residence in urban area have high probability of graduation. As a result, the Deep Learning module developed rather than the decision tree was identified as a model for evaluating the graduation of students more efficiently.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.2
• /
• pp.95-106
• /
• 2014

In this study, the applicability of a standard vector model was evaluated using RIMGIS vector data and a portal based river-geospatial information web service system was developed using XML and JSON based data linkage between the server and the client. The RIMGIS vector data including points, lines, and polygons were converted to the Geospatial Data Model(GDM) developed in this study and were validated by layers. After the conversion, it was identified that the attribute data of a shape file remained without loss. The GeoServer GDB(GeoDataBase) that manages a DB in the portal was developed as a management module. The XML-based Geography Markup Language(GML) standards of OGC was used for accessing to and managing vector layers and encoding spatial data. The separation of data content and expression in the GML allowed the different expressions of the same data, convenient data revision and update, and enhancing the expandability. In the future, it is necessary to improve the access, exchange, and storage of river-geospatial information through the user's customized services and Internet accessibility.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.122-131
• /
• 1992

An expert system is developed which can design the power transmission involute cylindrical gears on the basis of strength and durability. Bending strength, surface durability, scoring, and wear probability are considered as the basis. The basic components of the expert system are knowledge base, inference engine, and working memory. The knowledges in knowledge base are classified hierarchically into the knowledges used in selection of gear type, selection of materials, and determination of K factor and are represented by rules. In the inference engine two inference methods are implemented with the depth first search method. For-ward chaining method is introduced in the selection of gear type and materials and in the determination of K factor. Backward chaining method is introduced in the detailed design of module and face width in accordance with the validation of strength. And inference efficiency is achieved by constructing the part needing a lot of numerical calculations in strength estimation separately from inference mechanism. The working memory is established to save the results during inference temporarily. In addition, design database of past design results is built for consultation during design and knowledge acquisition facility, explanation facility, and user interface are included for the usefulness of user. This expert system is written with the PROLOG programming language and the FORTRAN language in numerical calculation part which interfaced with PROLOG and can also be executed on IBM-PC compatible computer operated by MS-DOS alone.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.107-115
• /
• 2013

Smart appliances with multi-media and telecommunication equipments provide users complicated convenience functions. On the contrary, 8-bit controller-based low performance electronics still cannot afford such multimedia and telecommunication. If we find a way to have low-end electronics connected and provide complicated functions, they can be also made "smart". Fortunately, 8-bit controllers used in low-end appliances have UART, which can be connected to any of BlueTooth, Wi-Fi and ZigBee communication modules which can, in turn, communicate with smart devices. Any communication module can be attached to the low-end electronics due to the variety of smart devices' connectivity at the other side. Although the convenience functions seem complicated, they are actually macros in a script form composed of micro commands which implement the base functions of appliances. Since the kinds of the base functions are not that many, the low-end electronic appliances will become "smart" if their control program can be extended to execute sequentially the micro commands in any combination. Such simple innovation has not seen the world, until now due to the overhead of the additionally required hardware such as display devices and buttons. The high-quality display and touch screen functionalities of smart devices can replace the required hardware, and remove the overhead completely. In fact, the low-end appliances become smart as if an "evolution kit" is newly equipped.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.34-45
• /
• 2004

Existing Semangeum's water balance analysis simplifies whole basin to single basin and achieved volume of effluence that produce by Kajiyama way to foundation. But Semangeum is complicated and various rice-wine strainer supply system. And there is difficulty to apply as elastic when water balance element is changed at free point. Divided to unit possession station for suitable water balance analysis model application to Semangeum in this study. And developed basin water balance model of GIS base that can do details analysis is bite about development and transfer of an appropriation in the budget of basin water resources. Achieved study including abstraction and concept design that use UML (unified modeling language) diagram for details analysis, stream network composition for rice-wine strainer supply system application, preprocessing of GIS base and postprocessing module development, model revision and verification etc. Support of this water balance analysis model is available to establish efficient water resources administration plan through outward flow process analysis of water resources. And support is considered to be possible in more convenient and, reasonable water resources administration way establishment by minimizing manual processing in systematic water resources government official to user and support diversified analysis system.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.394-405
• /
• 2009

Statement of problem: Crestal bone loss, a common problem associated with dental implant, has been attributed to excessive bone stresses. Design of implant's transgingival (TG) part may affect the crestal bone stresses. Purpose: To investigate if concavely designed geometry at a dental implant's TG part reduces peri-implant bone stresses. Material and methods: A total of five differently configured TG parts were compared. Base model was the ITI one piece implant (Straumann, Waldenburg, Switzerland) characterized by straight TG part. Other 4 experimental models, i.e. Model-1 to Model-4, were designed to have concave TG part. Finite element analyses were carried out using an axisymmetric assumption. A vertical load of 50 N or an oblique load of 50 N acting at $30^{\circ}$ with the implant's long axis was applied. For a systematic stress comparison, a total of 19 reference points were defined on nodal points around the implant. The peak crestal bone stress acting at the intersection of implant and crestal bone was estimated using regression analysis from the stress results obtained at 5 reference points defined along the mid plane of the crestal bone. Results: Base Model with straight configuration at the transgingival part created highest stresses on the crestal bone. Stress level was reduced when concavity was imposed. The greater the concavity and the closer the concavity to the crestal bone level, the less the crestal stresses. Conclusion: The transgingival part of dental implant affect the crestal bone stress. And that concavely designed one may be used to reduce bone stress.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.147-154
• /
• 2009

Lately, superhigh speed network infra is developing with the fast speed, is evolved by step that existent appliances are digitalised and appliances are become remote control by being gear to network. Also, gearing in Home network and superhigh speed network infra, control appliances in Internet and research that do monitering is proceed. Therefore, describe about indoor environment automatic control system that use Wireless sensor and Microcontroler in this paper. Because using that electric power, Zigbee sensor and Wireless module, embodied system that measured in the room temperature and use ATmega128 Microcontroler and use each device (temperature, illumination, humidity) back in house and control humidifier, electric fan etc. Can use variously in Home network field by this Wireless sensor and Microcontroler base, and also can apply variously to several industry fields as well as Home network field.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.4
• /
• pp.193-204
• /
• 2016

Objective: This study carried out base research to build an agricultural safety monitoring system through ICT convergence to reduce safety accidents and enhance welfare in life in the agricultural field. Background: The functions and values of rural villages as the space of living are recognized anew, but occupational accident rate due to farm work accidents is on the rise each year. Therefore, the seriousness of such a problem emerges. The convergence technology combining ICT is recently applied to industries overall, and therefore better services are offered. However, studies on ICT convergence has not yet been applied to the agricultural safety field. Method: This study identified ICT convergence service technology trends and representative serious accident types mainly occurring in agricultural activities. This study defined the major factors of farm work accidents and ICT to solve those accident factors including the sensor technology, wired/wireless communication technology and location information service, and applied them to prototype PCB for the development of an agricultural safety monitoring system. Results: This study proposed an emergency monitoring system for farmers and a harmful environment monitoring system. The ICT technology to prevent farm work accidents can be summarized as sensing technology, ICT and network technology and user interface technology. This study also designed PCB module configuration and situation judgment algorithm as basic research for proposed monitoring system development. Conclusion: The ICT-based agricultural safety monitoring research proposed in this study is expected to become the basis to build a future real time monitoring system, and also is expected to contribute to social safety and welfare service improvement for farmers. Application: The ICT convergence farmer accident prevention system will make contributions to the prevention of serious farm work accidents.