• 제목/요약/키워드: Base Oil

검색결과 421건 처리시간 0.027초

한국산 밀어 (Rhinogobius brunneus)의 산란습성, 난발생 및 자어의 형태발달 (Spawning Behavior and Development of Eggs and Larvae of the Korea Freshwater Goby, Rhinogobius brunneus (Gobiidae: Perciformes))

  • 한경호;김용억;최규정
    • 한국수산과학회지
    • /
    • 제31권1호
    • /
    • pp.114-120
    • /
    • 1998
  • 밀어 어미를 경상남도 김해군 상동면 매리에 위치한 하천에서 끌망과 쪽대을 사용하여 채집하여 사육하여 1995년 2월부터 5월까지 6차례에 걸쳐 산란행동과 난발생 과정을 관찰하였으며, 부화한 자어를 사육하면서 성장에 따른 형태발달을 관찰하였다. 1. 산란된 알은 수조내의 작은 돌 아랫면에 거의 원형에 가깝게 한층으로 조밀하게 매달려 있었으며, 방정후 수컷은 알을 보호하였다. 2. 수정난은 난경이 $1.28\~$1.56\times0.62\~0.67mm$로 부착사를 지닌 투명한 침성란으로 많은 소유구를 가지고 있었다. 3. 부화에 소요된 시간은 사육수온 $16.0\~18.0^{\circ}C$ (평균 $17.0^{\circ}C$)에서 수정후 146시간 30분부터 부화하기 시작하였다. 4. 밀어의 알은 발생 후반에 배체의 머리 부분이 난황의 선단부를 향하는 정상난과 반대로 난막의 기부, 즉 부착사 쪽을 향하는 역자난이 출현하였다. 5. 부화직후의 자어는 전장 $3.10\~3.30mm$ (평균 3.22 mm)로 입과 항문이 열려있지 않았고, 흑색소포는 부레위, 항문 주변, 꼬리 중앙부분의 배쪽에 산재되어 있었으며, 근절수는 $25\~27$개 였다. 6. 부화후 $3\~4$일째의 자어는 전장 $3.30\~3.85mm$(평균 3.60mm)로 난황과 유구가 거의 흡수되어 입과 항문이 열리고, rotifer를 먹기 시작하였으며, 후기자어기로 이행하였다. 7 부화후 $20\~22$일째 개체는 평균 전장 5.85mm로 성장하였으며, 척소미단이 $45^{\circ}$ 정도로 위로 굽어져 있었다.

  • PDF

피스톤 크라운용 단강에 인코넬 718 용접재료로 용접된 용접부의 특성 평가 (Evaluation of Characteristics of Welding Zones Welded with Inconel 718 Filler Metal to Piston Crown Forged Material)

  • 이성열;문경만;정재현;이명훈;백태실
    • 한국해양공학회지
    • /
    • 제30권4호
    • /
    • pp.334-340
    • /
    • 2016
  • The combustion chamber of a diesel engine is often exposed to a more serious wear and corrosion environment than other parts of the engine because its temperature increases as a result of using heavy oil of low quality. Therefore, repair and built-up welding methods must be performed on worn or corroded parts of the piston crown, exhaust valve, etc. from an economical point of view. In this study, Inconel 718 filler metal was used in repair welding on the groove of a forged steel specimen for a piston crown, along with built-up welding on the surface of another forged steel specimen. Then, the corrosion characteristics of the weld metal zone for the repair welding and the deposited metal zone for the built-up welding were investigated using electrochemical methods in a 35% H2SO4 solution. The deposited metal zone indicated better corrosion resistance than the weld metal zone, showing a nobler corrosion potential, higher impedance, and smaller corrosion current density. It is considered that metal elements with good corrosion resistance were generally included in the filler metal, and these elements were also greatly involved in the deposited meta by built-up welding, whereas the weld metal consisted of metal elements mixed with both the filler metal and base metal elements because of the molten pool produced by the repair welding. Finally, it is considered that the hardness of the weld metal was increased by the repair welding, whereas the built-up welding improved the corrosion resistance of the deposited metal.

RNA-Seq explores the functional role of the fibroblast growth factor 10 gene in bovine adipocytes differentiation

  • Nurgulsim Kaster;Rajwali Khan;Ijaz Ahmad;Kazhgaliyev Nurlybay Zhigerbayevich;Imbay Seisembay;Akhmetbekov Nurbolat;Shaikenova Kymbat Hamitovna;Omarova Karlygash Mirambekovna;Makhanbetova Aizhan Bekbolatovna;Tlegen Garipovich Amangaliyev;Ateikhan Bolatbek;Titanov Zhanat Yeginbaevich;Shakoor Ahmad;Zan Linsen;Begenova Ainagul Baibolsynovna
    • Animal Bioscience
    • /
    • 제37권5호
    • /
    • pp.929-943
    • /
    • 2024
  • Objective: The present study was executed to explore the molecular mechanism of fibroblast growth factor 10 (FGF10) gene in bovine adipogenesis. Methods: The bovine FGF10 gene was overexpressed through Ad-FGF10 or inhibited through siFGF10 and their negative control (NC) in bovine adipocytes, and the multiplicity of infection, transfection efficiency, interference efficiency were evaluated through quantitative real-time polymerase chain reaction, western blotting and fluorescence microscopy. The lipid droplets, triglycerides (TG) content and the expression levels of adipogenic marker genes were measured during preadipocytes differentiation. The differentially expressed genes were explored through deep RNA sequencing. Results: The highest mRNA level was found in omasum, subcutaneous fat, and intramuscular fat. Moreover, the highest mRNA level was found in adipocytes at day 4 of differentiation. The results of red-oil o staining showed that overexpression (Ad-FGF10) of the FGF10 gene significantly (p<0.05) reduced the lipid droplets and TG content, and their down-regulation (siFGF10) increased the measurement of lipid droplets and TG in differentiated bovine adipocytes. Furthermore, the overexpression of the FGF10 gene down regulated the mRNA levels of adipogenic marker genes such as CCAAT enhancer binding protein alpha (C/EBPα), fatty acid binding protein (FABP4), peroxisome proliferator-activated receptor-γ (PPARγ), lipoprotein lipase (LPL), and Fas cell surface death receptor (FAS), similarly, down-regulation of the FGF10 gene enriched the mRNA levels of C/EBPα, PPARγ, FABP4, and LPL genes (p<0.01). Additionally, the protein levels of PPARγ and FABP4 were reduced (p<0.05) in adipocytes infected with Ad-FGF10 gene and enriched in adipocytes transfected with siFGF10. Moreover, a total of 1,774 differentially expressed genes (DEGs) including 157 up regulated and 1,617 down regulated genes were explored in adipocytes infected with Ad-FGF10 or Ad-NC through deep RNA-sequencing. The top Kyoto encyclopedia of genes and genomes pathways regulated through DEGs were the PPAR signaling pathway, cell cycle, base excision repair, DNA replication, apoptosis, and regulation of lipolysis in adipocytes. Conclusion: Therefore, we can conclude that the FGF10 gene is a negative regulator of bovine adipogenesis and could be used as a candidate gene in marker-assisted selection.

딥러닝 기반 김부각 건조 반제품 표면 검출 모델 개발 (Development of surface detection model for dried semi-finished product of Kimbukak using deep learning)

  • 김태형;권기현;김아나
    • 한국정보전자통신기술학회논문지
    • /
    • 제17권4호
    • /
    • pp.205-212
    • /
    • 2024
  • 본 연구는 건조부각을 유탕기에 투입하기 전 로봇에 장착된 진공 그리퍼를 활용하여 건조 반제품(건조부각)을 이송하기 위한 선별 작업에서 그리핑 성공률을 향상시기키 위한 수단으로 건조부각의 앞면(고명이 있는)과 뒷면(고명이 없는) 표면을 판별하는 딥러닝 모델을 제안한다. 획득한 건조부각 440개의 RGB 영상을 기반으로 데이터 증강 기법을 적용한 후 건조부각 영역 및 표면 정보 라벨링을 진행하였다. 데이터 전처리 과정을 거친 건조부각 데이터를 기반으로 영역 검출을 위해 딥러닝 모델은 YOLO-v5을 적용하였다. 그 결과 건조부각 앞면 영역 검출의 mAP와 mIoU 값은 각각 0.98와 0.96으로 나타났으며, 뒷면의 경우 각각 1.00과 0.95로 나타났다. 앞면과 뒷면 2개의 클래스에 대하여 이진분류한 결과는 average 98.5%, recall 98.3%, precision 98.6%, F1-score 98.4%로 나타났다. 본 연구 결과를 통하여 RGB 영상을 활용한 건조부각의 표면 정보에 대한 분류가 가능하며, 추후 유탕 전 건조부각 표면 선별공정의 로봇-자동화 시스템 개발에 활용될 가능성을 확인하였다.

국내 해양시설의 신고 현황과 관리 방안에 관한 연구 2. 지역별 및 시설종류별 현황을 중심으로 (A Study on Reported Status and Management Plan of Marine Facilities in Korea 2. On the Basis of Region and Type of Facilities)

  • 김광수
    • 해양환경안전학회지
    • /
    • 제16권3호
    • /
    • pp.275-285
    • /
    • 2010
  • 2009년 말 기준의 국내 해양시설 신고 현황을 지역별 및 시설 종류별로 분석하고 국가차원의 관리방안을 제안하였다. 여수청에 신고한 시설이 8가지 종류로 가장 다양하였으나 포항청, 대산청 및 제주해양관리단에 신고한 시설이 각각 3가지 종류에 불과하였다. 기름 및 유해액체물질 저장시설은 모든 지방청의 신고 실적이 있고 시설의 수도 가장 많은 종류이며, 여수청과 마산청이 각 38개소로 공동 1위를, 평택청이 11개소로 최하위를 차지하였다. 오염물질저장시설은 마산청이 4개소, 동해청과 목포청이 각 2개소, 여수청, 군산청 및 평택청이 각 1개소였으며 나머지 지방청에는 신고 실적이 없었다. 선박건조 수리 해체시설은 모든 지방청의 신고 실적이 있는 종류이며, 전국 시설(조선소)의 45%가 마산청과 부산청 관할의 남해 동부해역에 집중되었다. 하역시설은 부산청과 목포청이 각 3개소, 대산청이 1개소였으며 나머지 지방청은 신고 실적이 없었다. 폐기물저장시설은 울산청이 5개소, 군산청이 4개소, 인천청이 2개소, 여수청이 1개소였으며 나머지 지방청에는 신고 실적이 없었다. 취수 배수시설은 전국의 65%가 포항지역과 목포지역에 집중되었고, 유어장은 전국의 78%가 마산지역에 집중되었다. 그 밖의 시설은 동해청이 4개소, 마산청이 3개소, 여수청과 평택청이 각 2개소, 인천청과 울산청이 각 1개소였으며 나머지 지방청에는 신고 실적이 없었다. 종합해양과학기지는 제주해양관리단이 3개소, 여수청, 울산청 및 군산청 각각 1개소였으나 나머지 지방청에는 신고 실적이 없었다. 해양시설에 대한 국가차원의 관리방안으로는 지방청별 여건을 고려한 관리, 시설 종류별 특성을 고려한 관리, 관계 법령 및 규정의 개정, 해양시설 종류별 이행사항 숙지 및 준수, 국가적 견지의 적극적 관리조치 등을 제안하였다.

윤활유첨가제로써 마모억제 성능을 갖는 Dimethacryloyloxy Alkane 유도체에 관한 연구 (A Study on Dimethacryloyloxy Alkane Derivatives Having an Anti-wear Performance as Lubricating Oil Additives)

  • 한혜림;조정은;심대선;강충호;김영운;정노희;강호철
    • 공업화학
    • /
    • 제27권6호
    • /
    • pp.583-589
    • /
    • 2016
  • Zinc dialkyldithiophosphate (ZDDP)와 같이 금속을 포함한 윤활유 첨가제는 값이 싸다는 이점 때문에 널리 사용되고 있으나, 재와 같은 불순물이 발생한다는 단점이 있다. 본 연구에서는 ZDDP를 부분적으로 대체하여 zinc와 같은 금속을 포함하지 않는 구조인 알칸디올로부터 유래하는 bis[3-(dialkyloxyphosphorothionyl) thio-2-methylpropanyloxy] butane(BAP4)을 간편하고 효율적으로 합성하였고, 합성한 BAP4 화합물들에 따른 내 마모 특성을 살펴보았다. 여러 가지 알킬기가 있는 BAP4 화합물들이 4-ball 시험법에 의해 마모 직경(Wear scar diameter, WSD) 값이 측정되었다. BAP4 화합물에서 알킬기가 4에서 8로 증가함에 따라 WSD 값은 0.59 mm에서 0.45 mm로 급격히 감소했으나, BAP4의 알킬기가 8에서 14로 증가할 경우 WSD 값은 0.45 mm에서 0.50 mm로 서서히 증가했다. 따라서 BAP4 화합물 중 가장 WSD 값이 적게 나타난 것은 B8P4이었다. 윤활기유에 B8P4와 ZDDP를 0.50 wt%로 첨가하여 4-ball 시험을 실시한 결과, B8P4와 ZDDP의 WSD 값은 각각 0.45, 0.54 mm로 측정되었다. 또한, 열 중량 분석기(Thermogravimetric Analyzer, TGA)를 통해 열안정성을 확인하였고, 에너지 분산형 X-선 분광분석기(Energy-Dispersive X-rays Spectroscopy, EDS)로 tribofilm이 제대로 형성되었는지를 측정하였다.

PLAYMAKER2, 전문가 시스템을 이용한 동해 울릉분지 남부 신생대 후기 퇴적층의 퇴적환경 해석 (Interpretation of depositional setting and sedimentary facies of the late Cenozoic sediments in the southern Ulleung Basin margin, East Sea(Sea of Japan), by an expert system, PLAYMAKER2)

  • 정대교
    • 한국석유지질학회지
    • /
    • 제6권1_2
    • /
    • pp.20-24
    • /
    • 1998
  • 전문가 시스템(expert system)은 충분한 지식과 경험을 가지고 있는 한 분야의 전문가가 실제로 문제에 접근 해결해 나가는 방식대로 전산 시스템을 구성하여 이러한 시스템을 통해 컴퓨터가 대신 문제를 해결하도록 제작된 인공지능 방식의 한 소프트웨어이다. 이번 연구에서는 퇴적층의 퇴적상과 퇴적환경 분석을 위해 미국 사우스 캐롤라이나 대학에서 본래 1990년에 개발되었던 PLAYMAKER의 지식베이스의 일부를 새로 수정 보완하여 제작한 PLAYMAKER2를 활용하여 퇴적층의 퇴적상과 퇴적환경을 분석하였다. 연구대상은 동해 울릉분지 남서부 제 VI-1 광구에 분포하는 최대 층후 10,000 m에 달하는 신생대 후기 퇴적층으로서, 이 곳의 퇴적층은 크게 상·하부 두 부분-마이오세충과 플라이오-플라이스토세층-으로 구분된다. PLAYMAKER2에 의해 분석되어 신뢰값으로 표시된 신생대 후기 퇴적층에 대한 퇴적환경과 퇴적상해석 결과를 요약해 보면, 마이오세층의 퇴적환경은 사면: $57.4\%$, 연안: $21.4\%$, 대양저: $10.1\%$의 순이고, 퇴적상은 해저 선상지: $35.7\%$, 대륙사면: $26.3\%$, 삼각주: $16.1\%$, 심해저 평원: $6.1\%$, 대륙붕: $3.2\%$, 대륙붕단: $1.4\%$ 순이다. 또한 플라이오-플라이스토세층에 대한 PALYMAKER2의 해석 결과는 퇴적환경은 사면: $59.0\%$, 연안: $22.8\%$, 대양저: $7.0\%$의 순이고, 퇴적상은 삼각주: $24.1\%$, 대륙사면: $22.2\%$, 해저 선상지: $17.3\%$, 대륙붕: $7.0\%$, 심해저 평원: $4.8\%$, 대륙붕단: $2.6\%$ 순이다. PLAYMAKER2에 의한 마이오세층과 플라이오-플라이스토세층에 대한 퇴적환경과 퇴적상 해석결과와 기존 연구자들에 의한 고전적인 퇴적상 해석 결과를 비교해 보면 두 퇴적층 모두 큰 차이를 보이지 않는데 이는 PLAYMAKER2전문가 시스템이 비교적 양호하게 퇴적층의 퇴적환경과 퇴적상을 해석할 수 있음을 보여주는 것으로 평가된다. 다만 PLAYMAKER2가 보다 신뢰할 만한 퇴적환경 해석을 위한 전문가 시스템으로 구축되기 위해서는 향후 많은 퇴적학 전문가들이 추가로 참여하여 기존 규칙들을 재검증하고 새로운 규칙들을 첨가함으로써 보디 세련된 지식베이스를 개발하여야 할 것으로 판단된다.

  • PDF

빅데이터 도입의도에 미치는 영향요인에 관한 연구: 전략적 가치인식과 TOE(Technology Organizational Environment) Framework을 중심으로 (An Empirical Study on the Influencing Factors for Big Data Intented Adoption: Focusing on the Strategic Value Recognition and TOE Framework)

  • 가회광;김진수
    • Asia pacific journal of information systems
    • /
    • 제24권4호
    • /
    • pp.443-472
    • /
    • 2014
  • To survive in the global competitive environment, enterprise should be able to solve various problems and find the optimal solution effectively. The big-data is being perceived as a tool for solving enterprise problems effectively and improve competitiveness with its' various problem solving and advanced predictive capabilities. Due to its remarkable performance, the implementation of big data systems has been increased through many enterprises around the world. Currently the big-data is called the 'crude oil' of the 21st century and is expected to provide competitive superiority. The reason why the big data is in the limelight is because while the conventional IT technology has been falling behind much in its possibility level, the big data has gone beyond the technological possibility and has the advantage of being utilized to create new values such as business optimization and new business creation through analysis of big data. Since the big data has been introduced too hastily without considering the strategic value deduction and achievement obtained through the big data, however, there are difficulties in the strategic value deduction and data utilization that can be gained through big data. According to the survey result of 1,800 IT professionals from 18 countries world wide, the percentage of the corporation where the big data is being utilized well was only 28%, and many of them responded that they are having difficulties in strategic value deduction and operation through big data. The strategic value should be deducted and environment phases like corporate internal and external related regulations and systems should be considered in order to introduce big data, but these factors were not well being reflected. The cause of the failure turned out to be that the big data was introduced by way of the IT trend and surrounding environment, but it was introduced hastily in the situation where the introduction condition was not well arranged. The strategic value which can be obtained through big data should be clearly comprehended and systematic environment analysis is very important about applicability in order to introduce successful big data, but since the corporations are considering only partial achievements and technological phases that can be obtained through big data, the successful introduction is not being made. Previous study shows that most of big data researches are focused on big data concept, cases, and practical suggestions without empirical study. The purpose of this study is provide the theoretically and practically useful implementation framework and strategies of big data systems with conducting comprehensive literature review, finding influencing factors for successful big data systems implementation, and analysing empirical models. To do this, the elements which can affect the introduction intention of big data were deducted by reviewing the information system's successful factors, strategic value perception factors, considering factors for the information system introduction environment and big data related literature in order to comprehend the effect factors when the corporations introduce big data and structured questionnaire was developed. After that, the questionnaire and the statistical analysis were performed with the people in charge of the big data inside the corporations as objects. According to the statistical analysis, it was shown that the strategic value perception factor and the inside-industry environmental factors affected positively the introduction intention of big data. The theoretical, practical and political implications deducted from the study result is as follows. The frist theoretical implication is that this study has proposed theoretically effect factors which affect the introduction intention of big data by reviewing the strategic value perception and environmental factors and big data related precedent studies and proposed the variables and measurement items which were analyzed empirically and verified. This study has meaning in that it has measured the influence of each variable on the introduction intention by verifying the relationship between the independent variables and the dependent variables through structural equation model. Second, this study has defined the independent variable(strategic value perception, environment), dependent variable(introduction intention) and regulatory variable(type of business and corporate size) about big data introduction intention and has arranged theoretical base in studying big data related field empirically afterwards by developing measurement items which has obtained credibility and validity. Third, by verifying the strategic value perception factors and the significance about environmental factors proposed in the conventional precedent studies, this study will be able to give aid to the afterwards empirical study about effect factors on big data introduction. The operational implications are as follows. First, this study has arranged the empirical study base about big data field by investigating the cause and effect relationship about the influence of the strategic value perception factor and environmental factor on the introduction intention and proposing the measurement items which has obtained the justice, credibility and validity etc. Second, this study has proposed the study result that the strategic value perception factor affects positively the big data introduction intention and it has meaning in that the importance of the strategic value perception has been presented. Third, the study has proposed that the corporation which introduces big data should consider the big data introduction through precise analysis about industry's internal environment. Fourth, this study has proposed the point that the size and type of business of the corresponding corporation should be considered in introducing the big data by presenting the difference of the effect factors of big data introduction depending on the size and type of business of the corporation. The political implications are as follows. First, variety of utilization of big data is needed. The strategic value that big data has can be accessed in various ways in the product, service field, productivity field, decision making field etc and can be utilized in all the business fields based on that, but the parts that main domestic corporations are considering are limited to some parts of the products and service fields. Accordingly, in introducing big data, reviewing the phase about utilization in detail and design the big data system in a form which can maximize the utilization rate will be necessary. Second, the study is proposing the burden of the cost of the system introduction, difficulty in utilization in the system and lack of credibility in the supply corporations etc in the big data introduction phase by corporations. Since the world IT corporations are predominating the big data market, the big data introduction of domestic corporations can not but to be dependent on the foreign corporations. When considering that fact, that our country does not have global IT corporations even though it is world powerful IT country, the big data can be thought to be the chance to rear world level corporations. Accordingly, the government shall need to rear star corporations through active political support. Third, the corporations' internal and external professional manpower for the big data introduction and operation lacks. Big data is a system where how valuable data can be deducted utilizing data is more important than the system construction itself. For this, talent who are equipped with academic knowledge and experience in various fields like IT, statistics, strategy and management etc and manpower training should be implemented through systematic education for these talents. This study has arranged theoretical base for empirical studies about big data related fields by comprehending the main variables which affect the big data introduction intention and verifying them and is expected to be able to propose useful guidelines for the corporations and policy developers who are considering big data implementationby analyzing empirically that theoretical base.

한국수산업의 해외진출전략에 관한 연구 (Foreign Entry Strategies for Korean Fishery Firms)

  • 김회천
    • 수산경영론집
    • /
    • 제15권1호
    • /
    • pp.131-153
    • /
    • 1984
  • Fishery resources are still abundant compared with other resources and the possibility of exploitation is probably great. The Korean fishery industry has grown remarkably since 1957, and Korea is ranked as one of the major fishery countries. Its of fishery products reached the 9th in the world and the value of exports was 5th in 1982. But recently a growth rate has slowed down, due to the enlargement of territorial seas by the declaration of the 200 mile, Exclusive Economic Zone, the tendency to develop fishery resources strate-gically in international bargaining, the change in function of the international organizations, the expansion of regulated waters, the illegal arrest of our fishing boats, the rapid rise in oil prices, and the fall in fish prices, the development of fishery resources as a symbol of nationalism, the fishing boats decreptitude, the rise of crew wages, regulations on fishing methods, fish species, fishing season, size of fish, and mesh size, fishing quotas and the demand of excessive fishing royalties. Besides the the obligation of coastal countries, employing crews of their host countries is also an example of the change in the international environment which causes the aggravation of foreign profit of fishing firms. To ameliorate the situation, our Korean fishery firms must prepare efficient plans and study systematically to internationalize themselves because such existing methods as conventional fishing entry and licence fishing entry are likely to be unable to cope with international environmental change. Thus, after the systematic analysis of the problem, some new combined alternatives might be proposed. These are some of the new schemes to support this plan showing the orientation of our national policy: 1. Most of the coastal states, to cope with rapid international environmental change and to survive in the new era of ocean order, have rationalized their higher governmental structure concerning the fishery industries. And the coastal countries which are the objectives of our expecting entry, demand excessive economic and technical aid, limit the number of fishing boats’entry and the use of our foreign fishing bases, and regulate the membership of the international fishery commissions. Especially, most of the coastal or island countries are recently independent states, which are poorer in national budget, depend largely on fishing royalties and licence entry fees as their main resources of national finance. 2. Alternatives to our entry to deep sea fishing, as internationalization strategies, are by direct foreign investment method. About 30 firms have already invested approximately US $ 8 million in 9 coastal countries. Areas of investment comprise the southern part of the Atlantic Ocean, the Moroccan sea and five other sea areas. Trawling, tuna purse seining and five other fields are covered by the investment. Joint-venture is the most prominent method of this direct investment. If we consider the number of entry firms, the host countries, the number of seas available and the size of investment, this method of cooperation is perhaps insufficient so far. Our fishery firms suffer from a weakness in international competitive ability, an insufficiency of information, of short funds, incompetency in the market, the unfriendliness of host coastal countries, the incapability of partners in joint-ventures and the political instability of the host countries. To enlarge our foreign fishing grounds, we are to actively adopt the direct investment entry method and to diversity our collaboraboration with partner countries. Consequently, besides proper fishing, we might utilize forward integration strategies, including the processing fied. a. The enterprise emigration method is likely to be successful in Argentina. It includes the development of Argentinian fishing grounds which are still not exploited in spite of abundant resources. Besides, Arentina could also be developed as a base for the exploitation of the krill resources and for further entries into collaboration with other Latin American countries. b. The co-business contract fishing method works in American territorial seas where American fishermen sell their fishery products to our factory ships at sea. This method contributes greatly to obtaining more fishing quotas and in innovation bottom fishing operation. Therefore we may apply this method to other countres to diffuse our foreign fishing entry. c. The new fishing ground development method was begun in 1957 by tuna long-line experimental fishing in the Indian Ocean. It has five fields, trawling, skipjack pole fishing and shrimp trawling, and so on. Recently, Korean fisheries were successful in the development of the Antarctic Ocean krill and tuna purse seining. 3. The acceleration of the internationalization of deep sea fishing; a. Intense information exchange activities and commission participation are likely to be continues as our contributions to the international fishery organizations. We should try to enter international fishery commissions in which we are not so far participating. And we have to reform adequately to meet the changes of the function of the international commissions. With our partner countries, we ought to conclude bilateral fishery agreements, thus enlarging our collaboration. b. Our government should offer economic and technical aids to host countries to facilitate our firms’fishery entry and activities. c. To accelerate technical innovation, our fishery firms must invest greater amount in technical innovation, at the same time be more discriminatory in importing exogeneous fishery technologies. As for fishing methods; expanded use of multi-purpose fishing boats and introduction of automation should be encuraged to prevent seasonal fluctuations in fishery outputs. d. The government should increases financial and tax aid to Korean firms in order to elevate already weak financial structure of Korean fishery firms. e. Finally, the government ought to revise foreign exchange regulations being applied to deep sea fishery firms. Furthermore, dutes levied on foreign purchaed equipments and supplies used by our deep sea fishing boats thould be reduced or exempted. when the fish caught by Korean partner of joint-venture firms is sold at the home port, pusan, import duty should be exempted.

  • PDF

뽕나무깍지벌레(Pseudaulacaspis pentagona T.)의 생태적 특성 및 약제방제에 관한 연구 (Some Ecological Characteristics of the Mulberry Scale, Pseudaulacaspis pentagona T., and Its Control with Insecticides)

  • 박인균;김영택;윤형주;이영인
    • 한국잠사곤충학회지
    • /
    • 제37권1호
    • /
    • pp.74-85
    • /
    • 1995
  • 기주 범위가 넓고 방제가 어려운 해충으로 알려진 뽕나무깍지벌레의 주요 특성 및 방제법을 구명하기 위한 시험에서 다음과 같은 결과를 얻었다. 1. 수피에 고착하여 겨울을 지낸 암컷성충은 93년 48.16%, '94년 65.9%로서 평균 57.03%의 생충율을 보였다. 한편 월동 후 암컷성충의 80% 이상이 가지기부에서 30cm이내에 분포하였다. 2. 알은 장경 0.22mm, 단경 0.1mm의 짧은 타원형으로 백색과 주황색의 2계통이 있다. 3. 갓 부화한 이동형애벌레는 장경 0.23mm, 단경 0.13mm이었고 크고 검은 1쌍의 눈 및 촉각이 있으며 3쌍의 다리를 가지고 있다. 고착형 애벌레는 장경 0.24mm, 단경 0.13mm이며 체색은 부화당시 알의 색깔과 동일하였다. 4. 번데기는 체장 0.65mm, 체폭 0.32mm이고 짙은 황색을 띄고 있으며 검고 둥근 1쌍의 눈이 있고 1쌍의 날개와 촉각이 몸에 밀착해 있다. 5. 월동후 암컷은 장경 1.19mm, 단경 0.94mm이었으며 1세대 암컷은 장경 1.46mm, 단경 1.14mm로 월동후 암컷보다 다소 크며 체색은 연노랑색 또는 짙은 황색이었다. 실처럼 가늘고 긴 구기를 가지고 있고 암컷의 깍지 지름은 1.67mm 내외다. 6. 수컷은 체장 0.61mm, 체폭 0.22mm 내외이고 체색은 짙은 황색이며 1쌍의 날개와 3쌍의 다리가 있어 날거나 기어다닌다. 7, 알은 $25^{\circ}C$와 27$^{\circ}C$에서 각각 100%와 96.7%의 부화율을 나타냈고 22$^{\circ}C$에서는 90%가 부화하였으며 35$^{\circ}C$에서는 5%로서 매우 낮은 경향이었다. 8. 번데기의 우화율은 $25^{\circ}C$와 27$^{\circ}C$에서 각각 80.0%였으며 22$^{\circ}C$와 3$0^{\circ}C$에서는 60.6%와 66.7%이었고 35$^{\circ}C$에서는 33.3%였다. 9. 본 종의 총발육기간 (알기간, 애벌레기간, 번데기기간)은 $25^{\circ}C$에서 약 33일 (5.57일, 21.44일, 5.50일) 이었고 27$^{\circ}C$에서는 30일 (4.03일, 19.64일, 5.83일)이었다. 10. 본 종은 연간 2세대를 경과하는데 1세대성충은 6월하-7월상순에, 2세대는 9월중순-10월상순에 각기 우화하였으며 암컷성충형태로 월동하였다. 월동 후 암컷은 평균 174.2개의 알을 깍지밑에 산란하였으며 1세대 산란개시일은 '93년 5월 14일과 '94년 4월 29일이었고 부화개시일은 각 5월 26일과 5월 22일이었다. 11. 6월 중순에 애벌레를 대상으로 처리한 Phenthoate EC가 96.38%의 방제가로 약효가 가장 우수하였고 3월중순 및 4월중순 월동후 암컷을 대상으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.

  • PDF