• Korean Journal of Animal Reproduction
• /
• v.11 no.3
• /
• pp.189-195
• /
• 1987

This study was conducted in order to obtain the information of the histological changes in each of six segments of the epididymal ducts in Korean native goats. Thirty-two Korean native male goats were examined, dividing into seven groups, at 4 weeks intervals from 8 to 32 weeks of age. The results obtained were as follows. 1. The epididymal ducts showed histologically an abrupt growth at the age of 16 weeks being followed by almost full maturation at the age of 24 weeks. Diameter of the cauda was steadily larger than that of the caput and corpus of the epididymal ducts. 2. Spermatozoa in the lumen of epididymal ducts were first observable at the age of 16 weeks, thereafter showing sparse in the lumen of caput, whereas most dense in the lumen of cauda in the density of spermatozoa. 3. Ducts in the caput and corpus were lined by ciliated columnar epithelium until the age of 12 weeks, and later by pseudostratified ciliated columnar epithelium which was composed of ciliated columnar cells, clear cells and basal cells. Ducts of cauda epididymis were lined by simple ciliated columnar epithelia until 12 weeks of age and later by simple or pseudostratified ciliated columnar epithelium, and two types of ducts (small ducts with high epithelium and large ducts with lower epithelium) were noted. Nucleus of the epithelial cells in the caput were located in the base of cells but in the corpus and cauda, those were located in the mid part of cells. cilia were most developed in the epithelia of the corpus.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.488-490
• /
• 2009

The Spatial Image contents of Geomorphology 3-D environment is focused by the requirement and importance in the fields such as, national land development plan, telecommunication facility management, railway construction, general construction engineering, Ubiquitous city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. This As the results, We confirmed the solutions of varieties application for railway facilities management using 3-D spatial image contents and database design. Also, I suggested that U-city using topographical modeling about matching methods of high density elevation value using 3-D aerial photo with laser data are best approach for detail stereo modeling and simulation. There for of this, Using of rapid spatial information generation by various images and laser data through matching methods for the make of Spatial data base management inplementation are very powerful and much application of our life and real worlds.

• Journal of IKEEE
• /
• v.12 no.2
• /
• pp.110-117
• /
• 2008

This paper presents a new Insulated Gate Bipolar Transistor(IGBT) based on Non Punch Through(NPT) IGBT structure for power switching device. The proposed structure has adding N+ beside the P-base region of the conventional IGBT structure. The added n+ diffusion of the proposed device ensure device has faster turn-off time and lower forward conduction loss than the conventional IGBT structure. But, added n+ region can reduce th breakdown voltage and latching current density of the proposed device due to its high doping concentration. This problems can be overcome by using diverter on the right side of the device. In the simulation results, turn-off time of the proposed device is 0.3us and the on-state voltage drop is 3V. The results show that the proposed device has superior characteristic than conventional structure.

• Corrosion Science and Technology
• /
• v.6 no.3
• /
• pp.103-111
• /
• 2007

The effect of stress factors on the growing process of stress corrosion cracking (SCC) of the sensitized 18-8 stainless steel in high temperature water was investigated using equations of crack growth rate derived from applying electric circuits to SCC corrosion paths. Three kinds of cross sections have to be considered when electric circuit is constructed using total current. The first is ion flow passage area, $S_{sol}$, of solution in crack, the second is total dissolving surface area, $S_{dis}$, of metal on electrode of crack tip and the third is dissolving cross section, $S_{met}$, of metal on grain boundary or in base metal or in welding metal. Stress may affect each area. $S_{sol}$ may depend on applied stress, $\sigma_{\infty}$, related with crack depth. $S_{dis}$ is expressed using a factor of $\varepsilon(K)$ and may depend on stress intensity factor, K only. SCC crack growth rate is ordinarily estimated using a variable of K only as stress factor. However it may be expected that SCC crack growth rate depends on both applied stress $\sigma_{\infty}$ and K or both crack depth and K from this consideration.$\varepsilon(K)$ is expressed as ${\varepsilon}(K)=h_2{\cdot}K^2+h_3{\cdot}K^3$ when $h_{2}$ and $h_{3}$ are coefficients. Also, relationships between SCC crack growth rate, da/dt and K were simulated and compared with the literature data of JBWR-VIP-04, NRC NUREG-0313 Rev.2 and SKIFS Draft. It was pointed out in CT test that the difference of distance between a point of application of force and the end of starter notch (starting point of fatigue crack) may be important to estimate SCC crack growth rate. An anode dissolution current density was quantitatively evaluated using a derived equation.

• Smart Structures and Systems
• /
• v.17 no.3
• /
• pp.471-489
• /
• 2016

Modal identification based on ambient vibration data has attracted extensive attention in the past few decades. Since the excitation for ambient vibration tests is mainly from the environmental effects such as wind and traffic loading and no artificial excitation is applied, the signal to noise (s/n) ratio of the data acquired plays an important role in mode identifiability. Under ambient vibration conditions, certain modes may not be identifiable due to a low s/n ratio. This paper presents a study on the mode identifiability of an instrumented cable-stayed bridge with the use of acceleration response data measured by a long-term structural health monitoring system. A recently developed fast Bayesian FFT method is utilized to perform output-only modal identification. In addition to identifying the most probable values (MPVs) of modal parameters, the associated posterior uncertainties can be obtained by this method. Likewise, the power spectral density of modal force can be identified, and thus it is possible to obtain the modal s/n ratio. This provides an efficient way to investigate the mode identifiability. Three groups of data are utilized in this study: the first one is 10 data sets including six collected under normal wind conditions and four collected during typhoons; the second one is three data sets with wind speeds of about 7.5 m/s; and the third one is some blind data. The first two groups of data are used to perform ambient modal identification and help to estimate a critical value of the s/n ratio above which the deficient mode is identifiable, while the third group of data is used to perform verification. A couple of fundamental modes are identified, including the ones in the vertical and transverse directions respectively and coupled in both directions. The uncertainty and s/n ratio of the deficient mode are investigated and discussed. A critical value of the modal s/n ratio is suggested to evaluate the mode identifiability of the deficient mode. The work presented in this paper could provide a base for the vibration-based condition assessment in future.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.529-536
• /
• 2012

Recently, the interest of 3D contents are increased and viewers demand a variety of 3D contents. In such circumstances, underwater 3D contents are an alternative to meet the demands of viewers. Cause that underwater mass density is 1.33 times that in air the objects in underwater is bigger and closer in real. Therefore it needs to modify the distance between cameras, the distance to objects and the convergence value. In this paper, we present the method to set optimal depth values with the particularities of underwater space. In addition, through the case of underwater 3D production we present the method of underwater 3D contents development. We expect that a lot of material with colorful, variety marine organism in underwater will be made of 3D contents.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.14 no.3
• /
• pp.21-31
• /
• 1987

The overuse in the outdoor recreation lands has been deteriorating the natural resources and landscapes. So this study was executed to measure the users'impacts on vegetation and soil at Hwaum Temple District Campsite in the Mt. Jiri National Park, the southern part of Korea. Five sites were sampled in the study area according to the extent of impact observed. Then the users'densities and impacts on vegetation and soil were measured at each site. According to the result of this study, the numbers of species and individuals and the coverage of lower-layer vegetation showed outstanding changes by only light use. The numbers of species and individuals of middle-layer vegetation, species diversity indices, change rate in species composition of lower and middle-layer vegetation, damage rate of forces, contents of clay, soil moisture and organic matters, exchangeable base ions, soil hardness, organic matter depth and bare area of the campsite showed conspicuous changes from the site 4(19.6men / 1,000㎡). Especially, the self-repair of vegetation was impossible as the result of analysis of soil hardness and the formation of natural vegetation was expected to be difficult as the result of vegetation sturcture analysis over the users'average density of 19.6men /1,000㎡. The campsite management of this area shall be proposed as follows to prevent serious deterioration of natrual environment. A limitation of the present use and a conservation on soil and vegetation should be required at the site 4 and 5. Specially, prevention of camping recreation and artificial rehabilitation are necessary at the site 5(24. 3 men/1000㎡)

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.508-508
• /
• 1996

;The growth of films have considerable interest in the field of superlattice structured multi-layer epitaxy led to realization of new devices concepts. Molecular beam epitaxy (MBE) with in situ observation by reflection high-energy electron diffraction (RHEED) is a key technology for controlled layered growth on the atomic scale in oxide crystal thin films. Also, the combination of radical oxygen source and MBE will certainly accelerate the progress of applications of oxides. In this study, the growth process of single crystal films using by MBE method is discussed taking the oxide materials of Bi-Sr-Ca-Cu family. Oxidation was provided by a flux density of activated oxygen (oxygen radicals) from an rf-excited discharge. Generation of oxygen radicals is obtained in a specially designed radical sources with different types (coil and electrode types). Molecular oxygen was introduced into a quartz tube through a variable leak valve with mass flowmeter. Corresponding to the oxygen flow rate, the pressure of the system ranged from $1{\;}{\times}{\;}10^{-6}{\;}Torr{\;}to{\;}5{\;}{\times}{\;}10^{-5}$ Torr. The base pressure was $1{\;}{\times}{\;}10^{-10}$ Torr. The growth of Bi-oxides was achieved by coevaporation of metal elements and oxygen. In this way a Bi-oxide multilayer structure was prepared on a basal-plane MgO or $SrTiO_3$ substrate. The grown films compiled using RHEED patterns during and after the growth. Futher, the exact observation of oxygen radicals with MBE is an important technology for a approach of growth conditions on stoichiometry and perfection on the atomic scale in oxide. The oxidization degree, which is determined and controlled by the number of activated oxygen when using radical sources of two types, are utilized by voltage locked loop (VLL) method. Coil type is suitable for oxygen radical source than electrode type. The relationship between the flux of oxygen radical and the rf power or oxygen partial pressure estimated. The flux of radicals increases as the rf power increases, and indicates to the frequency change having the the value of about $2{\times}10^{14}{\;}atoms{\;}{\cdots}{\;}cm^{-2}{\;}{\cdots}{\;}S^{-I}$ when the oxygen flow rate of 2.0 seem and rf power 150 W.150 W.

• Journal of the Korean Ceramic Society
• /
• v.23 no.6
• /
• pp.37-44
• /
• 1986

Yttria-antimonia-stabilized zirconia was investigated with respect to the amount of $Sb_2O_3$ addition in the range of 0.5~5mole% to the base composition of $(ZrO)_{0.92}(Y_2O_3)_{0.08}$ The sinterbility modulus of rupture Vickers hardness evaporation of components phase form-tion and mcicrostructure were evaluated with antimonia content. Also two probe A. C conductivity measurement was subjected to all specimens and the best results are achieved with 1mol% $Sb_2O_3$ as a sinter agent and relative density of~98% obtained at 140$0^{\circ}C$ and this composition has a maximum electrical conductivity due to the possible substition of $Sb^{3+}$ for $Zr^{4+}$ site. The effect of $Sb_2O_3$ on the electrical conductivity of th bulk and the grain boundaries has on investigated using frequency dispersion analysis (5~106 Hz) Antimonia addition has a negative in-fluence on both the bulk and the grain boundary conductivity except for a 1 mon% addition. The additive antimonia has improve a modulus of rupture to 60~MPa due to metastable-tetragonal phase apparence and decrease the hardness with increasing the $Sb_2O_3$ content.

• Journal of the Korean Ceramic Society
• /
• v.44 no.10
• /
• pp.589-595
• /
• 2007

Physical properties of sputtered YSZ thin film electrolytes on anode thin film by spray pyrolisis has been investigated to realize the porous electrode and dense electrolyte multilayer structure for micro solid oxide fuel cells. It is shown that for better crystallinity and density, YSZ need to be deposited at an elevated temperature. However, if pure NiO anode was used for high temperature deposition, massive defects such as spalling and delamination were induced due to high thermal expansion mismatch. By changing anode to NiOCGO composite, defects were significantly reduced even at high deposition temperature. Further research on realization of full cells by processing hybridization and cell performance characterization will be performed in near future.