• 한국재료학회지
• /
• 제13권1호
• /
• pp.53-58
• /
• 2003

For the rib materials in PDP(plasma display panel), an effective method to improve the mechanical properties is to form a composite material by reinforcing a glass matrix with rigid fillers, such as alumina and titania powders. In this study, two types of ribs with different volume percent of fillers and with different glass matrix were tested for hardness, Young's modulus with the Berkovich indentation. As a result, cracks appeared around at the load of 1345 mN for the dense type of rib, while porous one endured until 2427 mN without any crack formation. Young's modulus and hardness decreased at the range: 90∼65 GPa, 9∼4 GPa, respectively as a function of indent load. Thus, a new method with nanoindenter represents a possible evaluation method for mechanical properties of barrier ribs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.823-826
• /
• 2008

Phosphate glass added the various alkali additives is one of the substitutive materials for the barrier-ribs in plasma display panel. The results of differential thermal analysis and coefficient of thermal expansion show that the alkali oxides affect the thermal properties of phosphate glass.

• Journal of KIEE
• /
• 제11권1호
• /
• pp.46-50
• /
• 2001

In order to improve the luminous efficiency in ac PDP(Plasma Display Panel), we have suggested the new structures of sustain electrodes with waffle-type barrier ribs and the discharge current for a given pulse voltage has been decreased by eliminating the electrode area which has nothing to do with visible light emission area compared with conventional structure. As a result, the luminous efficiency was improved about 30% compared with the conventional structure.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2082-2088
• /
• 2002

Among various methods to manufacture the PDP barrier ribs, the pressing and the roll forming methods are simple and economical because they form the ribs by utilizing the plastic flow of the green tape in a relatively short time without generating air-polluting dusts. In the present study, the roll forming method was investigated by experiments as well as numerical analyses and in result the groove roll and the preform were designed. The effect of draft angle, corner radius, and initial thickness of the green tape on the plastic flow was examined by a series of parametric studies. The preform was recommended to ease the plastic flow into the grooves and to avoid the occurrence of cracks during rolling and sintering processes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1364-1367
• /
• 2007

In this study, the effect of binder polymer on the photolithographic patterning of barrier ribs was studied from view point of polymer structure and barrier rib pattern.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.20-23
• /
• 2009

The efficacy improvement issues in a unit discharge cell have been approached from the structural considerations. The tested cell designs include (a) a coplanar type with annular auxiliary electrode buried in barrier ribs, (b) a coplanar type with split auxiliary electrodes also burred in barrier ribs and (c) a coaxial type with a floating electrode stacked on the base electrode. From spatiotemporally resolved optical images of near-IR emission taken by a gated-ICCD camera and relative VUV emission intensity estimated by laser absorption spectroscopy, the differences in the discharge and light emission performances of those three cell types have been compared and discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.989-992
• /
• 2008

X-ray lithography is one of the most powerful processes in the fabrication of nano/micro structures with a high aspect ratio. This process enables the fabrication of ultra-thin barrier ribs for PDP using X-ray sensitive paste. In this paper, organic material including photo-monomers, photo-oligomers, binder polymer and additives as well as inorganic powders with different size were optimized to fabricate high aspect ratio barrier rib pattern for PDP.

• 한국광학회지
• /
• 제12권2호
• /
• pp.103-108
• /
• 2001

플라즈마 디스플레이 패널(plasma display panel :PDP)에서 방출되는 광의 3차원 분포를 측정하기 위한 scanned point-detecting system(SPDS)을 고안하여 제작하였으며 이 시스템을 이용하여 실제 PDP의 3차원 광 방출 특성을 측정하고 해석하였다. SPDS는 상면에 핀홀이 달려 있는 광검출기(point detector)를 위치시킴으로써 특정 지점으로부터 방출되는 광만을 검출할수 있다. 3차원 물체의 특정 지점으로부터 방출된 광은 핀홀을 지나 검출기로 모두 입사되지만 다른 지점으로부터 방출된 광은 핀홀 앞에서 미리 집속되거나 핀홀 뒤에서 집속될것이므로 이러한 광들은 핀홀에 의해 대부분 차단될 것이다. 그러므로 물체의 특정 지점으로부터 방출된 광만이 핀홀이 설치된 검출기에 의해 검출되어 진다. SPDS를 이용하여 PDP cell 내에서 측정된 3차원 광 intensity 분포로부터 cellso의 방전현상을 다음과 같이 유추해낼수 있었다. Z축 측정이 진행될수록광의 intensity는 증가하였고 ITO전극의 안쪽부분에서 검출되는 광의 intensity가 가장 컸고 Y축 scan시 나타나는 X-Z평면에서 광의 intensity가 격벽과 격벽의 중심부분에서 가장 크게 나타났다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 춘계학술대회
• /
• pp.198-201
• /
• 2006

To produce fine structure with uniform surface of barrier ribs in PDP, acid etching process has been used in manufacture process. It is necessary to understand the mechanism of etching, particularly on the interface of ceramic fillers and matrix glass. We investigated the effect of ceramic fillers (ZnO, $Al_{2}O_3$) on the microstructure of borate glass system to find an etching mechanism of barrier ribs. The harrier ribs was etched with a several steps, dissolving a small amount of residual glass, taking out alumina fillers, and removing a cluster type of ZnO fillers and glass matrix.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.26-31
• /
• 2001

Recently, miniaturization and mass production are the main trends in manufacturing fields. Therefore, ultraprecision machining and MEMS technology have been taken more and more important position in machining of microparts. Micro endmilling is one of the prominent technology that has wide spectrum of application field ranging from macro parts to micro products, such as PDP and IT components, in precision products manufacturing. However, the deburring is significant problem in making smooth and precise parts in micro endmilling. This paper shows removal characteristics of burr generated by micro endmilling process. Additionally, it is necessary to understand the formation mechanism of burr of micro barrier ribs to find proper deburring method.