• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.111.2-111.2
• /
• 2015

Typical electrodes (metal or indium tin oxide (ITO)), which were used in conventional organic light emitting devices (OLEDs) structure, have transparency and conductivity, but, it is not suitable as the electrode of the flexible OLEDs (f-OLEDs) due to its brittle property. Although Graphene is the most well-known alternative material for conventional electrode because of present electrode properties as well as flexibility, its carrier injection barrier is comparatively high to use as electrode. In this work, we performed plasma treatment on the graphene surface and alkali metal doping in the organic materials to study for its possibility as anode and cathode, respectively. By using Ultraviolet Photoemission Spectroscopy (UPS), we investigated the interfaces of modified graphene. The plasma treatment is generated by various gas types such as O2 and Ar, to increase the work function of the graphene film. Also, for co-deposition of organic film to do alkali metal doping, we used three different organic materials which are BMPYPB (1,3-Bis(3,5-di-pyrid-3-yl-phenyl)benzene), TMPYPB (1,3,5-Tri[(3-pyridyl)-phen-3-yl]benzene), and 3TPYMB (Tris(2,4,6-trimethyl-3-(pyridin-3-yl)phenyl)borane)). They are well known for ETL materials in OLEDs. From these results, we found that graphene work function can be tuned to overcome the weakness of graphene induced carrier injection barrier, when the interface was treated with plasma (alkali metal) through the value of hole (electron) injection barrier is reduced about 1 eV.

• Archives of Pharmacal Research
• /
• v.27 no.11
• /
• pp.1177-1182
• /
• 2004

The effect of poly[2-methacryloyloxyethyl phosphorylcholine] (pMPC) on the skin permeation property was investigated by performing in vitro skin permeation study of a model drug, nicotinic acid (NA). Effect of pMPC polymer in donor solution on skin permeation rates was evaluated using side-by-side diffusion cells. Also, the structural alterations in the stratum corneum (SC), inter-lamellar bilayer (ILB) and dermis layers in pMPC-treated and -untreated skin sections were investigated with transmission electron microscopy (TEM). The permeation profile of NA without pMPC in donor solution showed biphasic mode: initial $1^{st} phase and 2^{nd}$ hydration phase. The sudden, more than 10-fold increase in flux from the initial steady state (43.5 $\mu g/cm^2$/hr) to the $2^{nd}$ hydration phase (457.3 $\mu g/cm^2$/hr) suggests the disruption of skin barrier function due to extensive hydration. The permeation profile of NA with 3% pMPC in the donor solution showed monophasic pattern: the steady state flux (10.9 $\mu g/cm^2$/hr) without abrupt increase of the flux. The degree of NA permeation rate decreased in a concentration-dependent manner of pMPC. TEM of skin equilibrated with water or 2% pMPC for 12 h showed that corneocytes are still cohesive and epidermis is tightly bound to dermis in 2% pMPC-treated skin, while wider separation between corneocytes and focal dilations in inter-cellular spaces were observed in water-treated skin. This result suggests that pMPC could protect the barrier property of the stratum corneum by preventing the disruption of ILB structure caused by extensive skin hydration during skin permeation study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.157-157
• /
• 2008

As the minimum feature size of semiconductor devices scales down to nano-scale regime, ultra shallow junction is highly necessary to suppress short channel effect. At the same time, Ni-silicide has attracted a lot of attention because silicide can improve device performance by reducing the parasitic resistance of source/drain region. Recently, further improvement of device performance by reducing silicide to source/drain region or tuning the work function of silicide closer to the band edge has been studied extensively. Rare earth elements, such as Er and Yb, and Pd or Pt elements are interesting for n-type and p-type devices, respectively, because work function of those materials is closer to the conduction and valance band, respectively. In this paper, we increased the work function between Ni-silicide and source/drain by using Pd stacked structure (Pd/Ni/TiN) for high performance PMOSFET. We demonstrated that it is possible to control the barrier height of Ni-silicide by adjusting the thickness of Pd layer. Therefore, the Ni-silicide using the Pd stacked structure could be applied for high performance PMOSFET.

• Solar Energy
• /
• v.17 no.1
• /
• pp.59-66
• /
• 1997

The solar cell electrical output parameters such as the open circuit voltage($V_{oc}$) and short circuit current density($V_{sc}$) are intrinsic characteristics depending on junction depth, doping concentration, metal contacts barriers and cell structure. As a role of thumb for solar cell design, the metal contact barriers for phosphorus doped emitter should have lower work function in order to provide lower series resistance. The fabrication of PESC(passivated emitter solar cell) structure usually involves the use of titanium as a metal contact barrier. Chromium, which work function is similar to titanium but conductance is higher than titanium is being investigated as the new metal contact barrier. Although titanium has lower work function difference than chromium, the electric performances of chromium as contact barrier are higher than titanium. This better performance is attributed to the lower resistivity from chromium. This paper, therefore, compares the attributes of metal barrier contacts using titanium and chromium.

• The Journal of Pediatrics of Korean Medicine
• /
• v.34 no.3
• /
• pp.67-75
• /
• 2020

Objectives This study is conducted to evaluate Th2 skewed condition control through skin fat barrier formation from the treatment using Coptidis Rhizoma and Glycyrrhiza uralensis extract. Methods The 6-week-old NC/Nga mice were divided into 4 groups: Control group (Ctrl), lipid barrier eliminate treatment group (LBET), Coptidis Rhizoma and Glycyrrhiza uralensis feeding treatment after lipid barrier elimination group (CGFT), dexamethasone feeding treatment after lipid barrier elimination group (DxFT). After 3 days, differences in skin condition, improvement of skin fat barrier, and control of Th2 skewed condition of each group were observed. Results Pathologic skin damage and tissue changes were less in the CGFT group than in the LBET and DxFT groups, and Transepidermal water loss (TEWL) and pH were also significantly decreased (p < 0.05). The filaggrin intensity and positive response also increased significantly in the CGFT group (p < 0.05). Kallikrein-related peptidase (KLK) 7, Protease activated receptor (PAR)-2, Thymic stromal lymphopoietin (TSLP), Interleukin (IL)-4, and the products of the Th2 differentiation process also showed a significant decrease compared to the LBET and DxFT groups (all p < 0.05). Conclusions The Coptidis Rhizoma and Glycyrrhiza uralensis extract causes skin barrier recovery and function recovery through the formation of skin fat barrier. This leads to the conclusion that Coptidis Rhizoma and Glycyrrhiza uralensis extract can control Th2 differentiation through the formation of skin fat barrier.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.209.2-209.2
• /
• 2015

Two dimensional layered materials, such as transition metal dichalcogenides (TMDs) family have been attracted significant attention due to novel physical and chemical properties. Among them, molybdenum disulfide ($MoS_2$) has novel physical phenomena such as absence of dangling bonds, lack of inversion symmetry, valley degrees of freedom. Previous studies have shown that the interface of metal/$MoS_2$ contacts significantly affects device performance due to presence of a scalable Schottky barrier height at their interface, resulting voltage drops and restricting carrier injection. In this study, we report a new device structure by using few-layer graphene as the bottom interconnections, in order to offer Schottky barrier free contact to bi-layer $MoS_2$. The fabrication of process start with mechanically exfoliates bulk graphite that served as the source/drain electrodes. The semiconducting $MoS_2$ flake was deposited onto a $SiO_2$ (280 nm-thick)/Si substrate in which graphene electrodes were pre-deposited. To evaluate the barrier height of contact, we employed thermionic-emission theory to describe our experimental findings. We demonstrate that, the Schottky barrier height dramatically decreases from 300 to 0 meV as function of gate voltages, and further becomes negative values. Our findings suggested that, few-layer graphene could be able to realize ohmic contact and to provide new opportunities in ohmic formations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.4
• /
• pp.217-222
• /
• 2003

A new two-dimensional analytical model for the potential distribution and drain-induced barrier lowering (DIBL) effect of fully depleted short-channel Silicon-on-insulator (SOI)-MESFET's has been presented in this paper. The two dimensional potential distribution functions in the active layer of the device is approximated as a simple parabolic function and the two-dimensional Poisson's equation has been solved with suitable boundary conditions to obtain the bottom potential at the Si/oxide layer interface. It is observed that for the SOI-MESFET's, as the gate-length is decreased below a certain limit, the bottom potential is increased and thus the channel barrier between the drain and source is reduced. The similar effect may also be observed by increasing the drain-source voltage if the device is operated in the near threshold or sub-threshold region. This is an electrostatic effect known as the drain-induced barrier lowering (DIBL) in the short-gate SOI-MESFET's. The model has been verified by comparing the results with that of the simulated one obtained by solving the 2-D Poisson's equation numerically by using the pde toolbox of the widely used software MATLAB.

• The Journal of Korean Medicine
• /
• v.29 no.1
• /
• pp.117-133
• /
• 2008

Objectives : Since ancient times, Koreans have applied medicinal spabaths for treatment of various diseases. The objective of this study was to investigate the effect of strontium, one of the common ingredients of such baths, experimentally on acute skin barrier damage. Materials and Methods : Male hairless mice, average weight 20g, were divided into six groups. Each group consisted of five mice. The first was the normal, non-treated group. The second was the control group with acute skin barrier damage intentionally induced by TS. The third was the Ba-Sr1 group bathed in 1mg/L strontium chloride before and after inducing acute skin barrier damage by TS. The fourth was the Ba-Sr7 group bathed in 7mg/L strontium chloride before and after inducing acute skin barrier damage by TS. The fifth was the Sr1 group bathed in 1mg/L of strontium chloride only after intentionally inducing acute skin barrier damage by TS. The sixth was the Sr7 group bathed in 7mg/L of strontium chloride only after intentionally inducing acute skin barrier damage by TS. External changes of skin, skin erythema level, transepidermal water loss level, and GOT and GPT level of each group were checked immediately before and after TS, 3 hrs, 5 hrs and 24 hrs after inducing acute skin barrier damage. Then, tissue samples were made and examined for damage to epithelial cells, stratum corneum, change of mucous polysaccharide in dermis and amount of mast cells. Statistical analysis was performed by one way-ANOVA, Scheffe and Duncan for a post hoc test and pairwise comparison for comparing for difference between each time. Statistical significance was achieved if the probability was less than 5% (p<0.05) Results : 1. From skin erythema and TEWL level indicating the function of the skin barrier, we can know that it is helpful to the skin barrier to bathe in a water solution including a low concentration of strontium. 2. In the control group with acute skin barrier damage induced by TS, skin barrier damage persisted until 3-5 hrs and recovered after 5-24 hrs. Differently from the control group, in the case of taking a bath in a water solution including strontium, skin barrier damage recovered after only 3-5 hrs. Therefore, the bath with a water solution including strontium can promote recovery of the skin barrier. 3. Bathing in water solution including a higher concentration of strontium was more beneficial to recovery of skin barrier damage. 4. There was no influence on serum GOT and GPT from bathing in a water solution including strontium. Conclusions : The strontium was effective for recovery and mitigation of acute skin barrier damage induced by tape stripping. I suggest that strontium (Sr) can be used as an external treatment medicine, addedinto bath water to treat acute skin barrier damage.

• The Journal of Pediatrics of Korean Medicine
• /
• v.31 no.3
• /
• pp.14-23
• /
• 2017

Objectives This study is conducted to evaluate skin fat barrier formation of Hataedock using the Coptis japonica & Glycyrrhiza uralensis extract. Methods The 3-week-old NC/Nga mice were divided into 3 groups: control group (Ctrl), Hataedock-treated group that uses the Coptis japonica & Glycyrrhiza uralensis (CGT) extract, and Hataedock-treated group that uses Bifidobacterium (BBT). After 2 weeks, changes in immunohistochemicals, and skin-lipid-barrier regulators were observed for the effects of Hataedock. Results In CGT group, loricrin-positive reaction has been increased by 231%, along with involucrin-positive reaction by 90%, filaggrin-positive reaction by 143%, and ASM-positive reaction by 341% in the stratum corneum. Conclusions Hataedock, using the extract of Coptis japonica & Glycyrrhiza uralensis, increased the expression of proteins promoting keratinocyte differentiation. This leads into conclusion that Hataedock may increase the keratinocyte formation and function which promotes skin barrier formation.

• Journal of Veterinary Clinics
• /
• v.25 no.6
• /
• pp.466-470
• /
• 2008

The purpose of this study is to investigate whether the effects of topically applied petrolatum and glycerin on the barrier repair of acetone-induced skin damage in 6 beagle dogs. To confirm the effects of petrolatum and glycerin on acetone disrupted skin models, we performed to evaluate the characteristics of transepidermal water loss and SC hydration and scanning electron microscopic observations. TEWL and SC hydration measurements were carried out 3, 6, 12, 24, 48h after applying petrolatum and glycerin during recovery from acute disruption. Our results showed that there were some different effects between petrolatum and glycerin on the acetone damaged skin such as barrier function repair process and SC hydration status. The results indicate that the significant improvement could be observed in glycerin apply more than petrolatum after acetone damages, and further study will be required.