• 분석과학
• /
• 제12권3호
• /
• pp.230-234
• /
• 1999

$Ba^{2+}$ 및 $Ti^{4+}$이 함유된 염산용액에서 dimethyl oxalate(DMO)가 열분해되면 barium titanyl oxalate(BTO)가 균일 생성되었다. 일정량의 hydroxy propyl cellulose(HPC)를 분산제로 사용하였고 120min의 숙성시간에서 생성된 BTO의 전 침전물을 회수하였다. 반응온도, 염화이온의 농도, $[DMO]_0/([Ba^{2+}]_0+[Ti^{4+}]_0)$의 초기 농도비, 그리고 가한 HPC가 BTO입자의 형태, 화학적 회수율, 그리고 그들의 선구물질로부터 형성된 티탄산 바륨의 특성에 영향을 미침을 알았다.

• Bulletin of the Korean Chemical Society
• /
• 제14권1호
• /
• pp.38-42
• /
• 1993

Factor analysis was applied to study the thermal decomposition of barium titanyl oxalate (BTO) which is used as the precursor of barium titanate. BTO was synthesized in $H_2O$ solvent and calcined at various temperatures. The X-ray diffraction patterns were obtained to make the data matrix of peak intensity vs. 2${\theta}$. Abstract factor analysis and target transformation factor analysis were applied to this data matrix. It has been found that the synthesized BTO consists of the crystals of $BaC_2O_4{\cdot}0.5H_2O\;and\;BaC_2O_4{\cdot}2H_2O$ as well as the amorphous solid of TiO-oxalate. The results also indicate that the BTO was transformed via $BaCO_3\;to\;BaTiO_3\;and\;Ba_2TiO_4$ during the thermal decomposition.

• 분석과학
• /
• 제10권3호
• /
• pp.203-208
• /
• 1997

출발물질로 $BaCl_2$와 $TiCl_4$를 사용하고 침전제로 dimethyl oxalate(DMO)를 사용하여 균일침전법에 의해 barium titanyl oxalate(BTO)를 제조하였다. 반응조건을 변화시켜 가면서 실험을 수행한 결과 반응 온도가 높을수록, [DMO]/[$Ba^{2+}+Ti^{4+}$]의 비율이 증가할수록 핵 형성시간이 단축되었으며 BTO 입자가 unimodal에서 bimodal을 거쳐 넓은 범위의 unimodal로 전환하는 속도가 빨랐다. 균일침전법으로 얻은 BTO를 $900^{\circ}C$에서 하소하여 얻은 barium titanate(BT)의 입자 크기는 통상의 공침법으로 합성한 BT 입자보다 큰 형태를 나타냈으며, 결정상은 tetragonal이었다. 또한 교반이 BTO 및 BT 분말의 특성에 큰 영향을 줌을 발견하였다.

• 분석과학
• /
• 제12권5호
• /
• pp.382-386
• /
• 1999

구형의 BTO(barium titanyl oxalate) 입자들을 물과 에탄올의 염산성 혼합용액에서 DMO(dimethyl oxalate)의 열분해에 의해 침전시켰다. 혼합 용매의 조성, 염산의 농도 및 반응 온도와 같은 실험적인 변수가 120 min의 숙성 시간동안 용기 바닥에 쌓인 BTO 입자의 크기 및 조성에 큰 영향을 주었다. 비교적 적은 알코올의 함량, 비교적 높은 농도의 염산 및 비교적 높은 반응 온도 등의 실험조건에서 화학량론적인 BTO 분말이 합성되었다. 그와 반대의 실험 조건에서는 단일 크기이고 그 크기가 $1{\mu}m$ 이하이나 티탄이 여분으로 함유되는 분말이 얻어졌다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.113-114
• /
• 2005

Sufficient removal rate with adequate selectivity to realize the pattern mask of tetra-ethyl ortho-silicate (TEOS) film for the vertical sidewall angle were obtained by chemical mechanical polishing (CMP) with commercial silica slurry as a function of pH variation. The changes of X-ray diffraction pattern and dielectric constant by CMP process were negligible.

• 한국재료학회지
• /
• 제12권7호
• /
• pp.560-567
• /
• 2002

Titanium (Ti) is a bioinert material and has lower elastic coefficient and better strength/volume property than other metals. Ferroelectric materials show alignment of positive and negative charges by poling treatment. This study was purposed to develop a new implant system by combining the advantages of Ti and ferroelectric property of $BaTiO_3$ (BTO). It was performed with the assumption that the $Ca^{2+ }$ ions would be easily attracted on negatively charged surface and the attracted cation might behave as nuclei for bone-like crystal growth in biological solutions. A ferroelectric BTO thin film on Ti was fabricated and the effect of poling treatment on the improvement of calcium phosphate (Ca-P) formation in biological solutions was evaluated. After immersion in Eagle’s minimum essential media (MEM) solution, NaCl was formed on Ti, and Ca-P layer containing NaCl was formed on Ti-O. Weak and sparse Ca-P layers were formed on BTO, while thick, homogeneous, and dense Ca-P layer was formed on negatively polarized BTO (N-BTO), which was confirmed by FE-SEM and EDX. In summary, these results demonstrate that poling the ferroelectric BTO surface negatively is effective for the formation of Ca-P layer in MEM solution, and that N-BTO coating on Ti could be used as a possible alternative method for enhancing the osseointegration of the implants.

• 한국분말재료학회지
• /
• 제13권2호
• /
• pp.129-137
• /
• 2006

In this study, high purity fine $BaTiO_3$ powders were prepared by SHS (Self-propagating High-temperature Synthesis). We would examinate the study of sintering properties and characteristics as a function of temperature with various additives (binder, sintering agent). In separately binder addition, the green and sintered density of specimen were increased as binder content increases. The increased porosity resulted in fine grain size due to the inhibition of grain boundary moving. The $Al_{2}O_{3},\;TiO_{2}$ and MgO playa role of increasing dielectric constants at room temperature. These values were decreased at curie temperature. In case of $SiO_2$, the Curie temperature was decreased. In this study, a high dielectric ceramic capacitor material with temperature stability was synthesized by using various additives.