• 한국항해항만학회지
• /
• 제43권6호
• /
• pp.437-443
• /
• 2019

항로표지는 선박에 대하여 등광, 형상, 색채, 음향, 전파 등을 수단으로 운항 선박에게 위치, 방향 및 장애물의 위치 등을 알려주는 항행보조시설 일체를 의미하며, 주야간 선박항행의 안전을 위한 기본 수단이다. 예인선은 안전을 위해 종류별 최소 설비요건을 마련하여 사고를 대비하고 있지만, 예인삭의 길이, 조류의 영향, 상대적으로 중량이 큰 부선의 타력으로 인한 영향 등으로 예인선과 선회권이 달라, 변침 시 부선이 예인선을 따라가지 못하여 등부표와 추돌하는 사고가 발생하기도 한다. 본 연구의 목적은 두 선박의 물리적 관계를 분석하여 예인선열을 식별하고 등부표와의 위험을 항로표지 관리운영 시스템을 통해 전파하는 기초 시스템을 제시하는데 있다. 연구를 통해 예부선의 사전 식별 가능성을 확인하였고, 위험 전파를 위한 메시지를 설계하고 모의 시스템을 통한 위험 전파 및 전자해도 상에 위험을 표시하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 춘계학술대회
• /
• pp.85-86
• /
• 2011

On 7 December 2007, the Hebei Spirit, a 260,000 dwt VLCC, anchored near Korea's Daesan Port, was collided with a passing crane-carrying barge Samsung1, which was under tow of two tugs Samsung T5 and Samho T3. In this study, the behaviour of Hebei Spirit at the time of the accident has been reproduced and analyzed by simulation. This study precedes the study for the investigation of any available countermeasures for Hebei Spirit to prevent the accident. The simulation has been done only for Hebei Spiri and the motion of Samsung barge is just given with recorded AIS data. Dynamic characteristics of Hebei Spirit have been modeled based on empirical data and her sea trial data. Effects of current, wave and wind are also estimateed using empirical formula. Considering uncertainty of environmental condition and control of Hebei Spirit, simulation has been done by varying engine control method and holding power coefficients of the anchor. Finally, based on simulations, the most plausible scenario on the state of anchor and engine control could cause real accidents.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.293-300
• /
• 2006

정치적, 경제적 세계화가 진행되고 있는 국제적인 현 상황은 국내의 남북문제에도 커다란 영향을 끼치고 있다. 이러한 시대적 흐름에 따라 남북 간의 경제적 교류 또한 활발해 지고 있으며, 이에 따른 최적의 물류시스템을 개발하는 것이 필요하게 되었다. 본 연구에서는 그 물류시스템의 한 요소인 운송수단에 대해, 구체적으로는 남북 물류 활성화를 대비하는 한 축으로서의 인천-개성 간을 잇는 내륙의 도로와 철도, 그리고 연안 항로를 통한 해운의 특성에 대해 비교, 조사하였으며, 이에 의거하여 근해운송(Short Sea Shipping) 시스템의 하나인 푸셔-바지 시스템을 인천-개성 간의 최적 운송수단으로 제시하였다.

• 대한조선학회지
• /
• 제21권3호
• /
• pp.11-18
• /
• 1984

In recent days, many manufacturing factories have been established and operated along riversides or on sea coasts. In consequence thereof, modern inland vessels with their small draught but large carrying capacity have been developed to operate as a single unit or in convoy with a barge. Knowledge in the behaviour of inland cargo vessels in shallow water exists presumably in U.S.A., U.S.S.R. and West Germany Literature available on this subject is quite limited. Model tests were carried out, both in calm water and in waves to obtain hull lines, which not only improve the seaworthiness of inland vessels but also permit to run in convey with other vessels on inland waterways. The results, which to some extent have also been tested in full scale, are entirely satisfactory. This paper discribes the resistance of some newly developed inland water cargo vessels.

• 동력기계공학회지
• /
• 제21권1호
• /
• pp.18-23
• /
• 2017

The Stokes waves representing the deep sea waves are expressed as a superposition of several linear waves. To evaluate the motions of floating bodies in the deep seas, it is necessary to evaluate the motions of the bodies in the Stokes waves. The 5th-order Stokes waves are expressed as a superposition of 5 linear waves. Therefore, the motion responses of the bodies in the Stokes waves would be expressed as a superposition of the motion responses of the bodies in the each linear waves. In this research, The experimental results were compared with the numerical results in linear waves and Stokes waves.

• Journal of Ship and Ocean Technology
• /
• 제6권3호
• /
• pp.13-25
• /
• 2002

In this paper, the motion responses with hydrodynamic interaction effect between two off-shore floating structures in various heading waves are studied by using a linearized three-dimensional potential theory. Numerical calculations using three-dimensional pulsating source distribution techniques have been carried out for twelve coupled linear motion responses and relative motions of the barge and the ship in oblique waves. The computational results give a good correlation with the experimental results and also with other numerical results. As a result, the present computational tool can be used effectively to predict the motion responses of multiple offshore floating structures in waves.

• 선박안전
• /
• 통권27호
• /
• pp.25-36
• /
• 2009

Despite the development of the various navigational equipment, such as GPS, ARPA, ECDIS, AIS, VDR, and hull monitoring system, marine accidents are still a leading concern in shipping industry. For all accidents over the reporting period, approximately 60 to 80% of the accidents was involved in human error. It means that in each case, some events which were associated with human error initiated an accident, and those failures of human performance led to the failure to avoid an accident or mitigate it's consequences. However, the improvement and the effort on the maritime human error are still limited in an elementary step. The objective of this paper is to propose a modified Human Factors Analysis and Classification System (HFACS) model in order to analyse the collision accidents of tug-barge ship.

• Molecules and Cells
• /
• 제38권4호
• /
• pp.297-303
• /
• 2015

Skeletal muscle insulin resistance, which increases the risk for developing various metabolic diseases, including type 2 diabetes, is a common metabolic disorder in obesity and aging. If potential treatments are to be developed to treat insulin resistance, then it is important to fully understand insulin signaling and glucose metabolism. While recent large-scale "omics" studies have revealed the acetylome to be comparable in size to the phosphorylome, the acetylation of insulin signaling proteins and its functional relevance to insulin-stimulated glucose transport and glucose metabolism is not fully understood. In this Mini Review we discuss the acetylation status of proteins involved in the insulin signaling pathway and review their potential effect on, and relevance to, insulin action in skeletal muscle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.705-710
• /
• 2002

Welding is used not only during the shipbuilding, but also during the repairing of ships. While repairing of ships, it is inevitable to weld new materials with degraded materials. In this case, it is predicted that the strength of both the sections is not identical each other. In this study, the respective welded joints in terms of mechanical properties such as microstructure, mechanical strength and fatigue crack propagation, with the component obtained from the barge used for a long-term period, were analyzed. It was found that the material degradation had a significant effect on the welded joints. The fatigue crack propagation in welded sections showed a big difference. The rate of fatigue crack growth of degraded material for both heat affected zone and parent metal was faster than that of new material. By contrast, The result within identical materials showed that the heat-affected zone was slower than that of parent metal

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.75-82
• /
• 2002

Welding is used not only for the shipbuilding, but also for the repairing of ships. While repairing of ships, it is inevitable to weld new materials with degraded materials. In this case, it is predicted that the strength of both the sections is not identical each other. In this study, the respective welded joints in terms of mechanical properties such as microstructure, mechanical strength and fatigue crack propagation, with the component obtained from the barge used for a long-term period, were analyzed. It was found that the material degradation had a significant effect on the welded joints. The fatigue crack propagation in welded sections showed a big difference. The rate of fatigue crack growth of degraded material for both heat affected zone and parent metal was faster than that of new material. By contrast, the result from identical materials showed that the rate of fatigue crack growth of the heat-affected zone was slower than that of parent metal.