• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.910-914
• /
• 2018

Since catalyst technology is one of the promising technologies to improve the working performance of next generation energy and electronic devices, many efforts have been made to develop various catalysts with high efficiency at a low cost. However, there are remaining challenges to be resolved in order to use the suggested catalytic materials, such as platinum (Pt), gold (Au), and palladium (Pd), due to their poor cost-effectiveness for device applications. In this study, to overcome these challenges, we suggest a useful method to increase the surface area of a noble metal catalyst material, resulting in a reduction of the total amount of catalyst usage. By employing block copolymer (BCP) self-assembly and nano-transfer printing (n-TP) processes, we successfully fabricated sub-20 nm Pt line and cross-bar patterns. Furthermore, we obtained a highly ordered Pt cross-bar pattern on a Ni thin film and a Pt-embedded Ni thin film, which can be used as hetero hybrid alloy catalyst structure. For a detailed analysis of the hybrid catalytic material, we used scanning electron microscope (SEM), transmission electron microscope (TEM) and energy-dispersive X-ray spectroscopy (EDS), which revealed a well-defined nanoporous Pt nanostructure on the Ni thin film. Based on these results, we expect that the successful hybridization of various catalytic nanostructures can be extended to other material systems and devices in the near future.

• Journal of KIBIM
• /
• v.11 no.1
• /
• pp.21-30
• /
• 2021

Reinforcing bars, a major component of the pre-fab structure, adheres to the existing on-site assembly method and attempts to develop and commercialize the technology of the pre-assembly method, but the effect is insignificant. Welded Wire / Bar Mat (WBM) has various advantages such as commercialization of rebar through machine manufacturing to improve workability, but it is different from the existing design and the construction method is different from the previous one. Therefore, to maximize the advantages of WBM and improve productivity, manufacturing, transportation, and construction from the design stage should be considered based on BIM from the initial design stage. In this paper, the concept of the design support system for the WBM was established based on the use of BIM in concrete reinforcement and the preliminary research on the WBM. WBM conversion design was performed for the existing prefabricated members, and based on this, the exchange format and system of the master prefabricated model with the WBM design data were set up. As a result of the pilot test, it was found that the traditional reinforcing bar information extracted from the master prefab model has transmitted 100% accurately. As for the WBM information, 100% of the information on the straight reinforcement was transmitted and represented, and the information on the bent reinforcement was found to have a 90% recall in the master BIM tool.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.775-786
• /
• 2022

In the plant structures including nuclear power plants, penetrations are frequently installed in walls and slabs to reinforce facilities during operation, and reinforcing bars are sometimes cut off during concrete coring. Since these penetrations are not considered at the design or construction stage, cutting of reinforcing bar during opening installation is actually damage to the structure, structural integrity evaluation considering the stress transition range or effective width around the new penetration is necessary. In this study, various nonlinear analyses and static loading experiments are performed to evaluate the effect of reinforcing bar cutting that occurs when a penetration is newly installed in the shear wall of wall-type building of operating nuclear power plant. In addition, the decrease in wall stiffness due to the installed new penetration and cutting of reinforcing bars is evaluated and the stress and strain distributions of rebars around penetration are also measured.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.2 s.233
• /
• pp.262-269
• /
• 2005

Optimization of a satellite structure under severe space launching environments is performed considering various design constraints. Simulate annealing, one of combinatorial optimization techniques, is used to optimize the satellite. The optimization results by the simulated annealing are compared to those by the method of modified feasible direction and genetic algorithm. Ten bar truss structure is optimized for feasibility study of the simulated annealing. Finally, the satellite structure is optimized by the simulated annealing algorithm under space environment. Weights of the satellite upper platform and propulsion module are minimized with consideration of several static and dynamic constraints. MSC/NASTRAN is used to find the static and dynamic responses. Simulated annealing has been programmed and integrated with the finite element analysis program for optimization. It is shown that the simulated annealing algorithm can be extended to the optimization of space structures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.4
• /
• pp.879-886
• /
• 1998

It is very important to understand the vibration and noise characteristics of a structure to developed quiet machines and lessen their noise. In this paper, the vibration and sound radiation characteristics of a simple and a bar-stiffened plate have been investigated using numerical and experimental techniques. In numerical process, FEM analysis has been performed for the vibration level ; the time-space squared and averaged velocity and BEM analysis for sound radiation parameters ; sound power and radiation efficiency. In experimental process, FFT signal processing method has been used. While a power from an exiciter is applied to the structure by using a point contact, sound intensity and vibration level has been measured. Based on these two data, the radiation efficiency has been calculated. Results show that the radiation efficiency for the stiffened structure increases compared to the simple plate, due to the extra edges provided by the stiffener.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.273-275
• /
• 2012

In apartment building with column structure, reinforcing bar of the column is constructed mainly using gas pressure welding job. Therefore, gas pressure welding job in very critical process is construction apartment building with column structure. The purpose of this study is to analyze productivity of gas pressure welding work in column structure apartment using Web-CYCLONE. In this study, a CYCLONE model was developed for the productivity analysis of gas pressure welding work. Through this model, the optimal combination of the resources was obtained. This study will be utilized in the future as a useful tool of productivity analysis and the determination of an optimal combination of resources for gas pressure welding in apartment with column structure.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.10a
• /
• pp.41-42
• /
• 2016

As the importance of maintenance of reinforced concrete structure recently has emerged, the attention of durability of structure has been increasing. There are many studies about durability decline especially due to the carbonation. In order to study carbonation progress after surface repair of carbonated concrete, each carbonation penetration velocity from different repair materials of concrete structure is compared through the experiment of carbonation accelerating CO₂ concentration to 20% and 100%. As carbonation infiltration progress is predicted through this study, the counterplan of service life evaluation will be prepared on selection of repair materials of concrete structure.

• Archives of Pharmacal Research
• /
• v.19 no.1
• /
• pp.71-73
• /
• 1996

The molecular structure of pirprofen, 3-chloro-4-(2,5-dihydro-1H-pyrrol-1-yl)-.alpha.-methyl-benzeneacetic acid, was determined by single crystal X-ray diffraction analysis. The compound was recrystallized from a mixture of chloroform and toluene in triclinic, space group P over $\bar1,\; with\; a=4.577(1),\; b=11.213(2),\; C=12.485(2){\AA},\alpa.=107.39(1),\;\beta=97.79(1),\;\gamma=92.03(2),\; and Z=2$ The calculated density is $1.384 g/cm^3$. The structure was solved by the direct method and refined by full matrix least-squares procedure to the final R value of 0.034 for 1681 independent reflections. The non-aromatic dihydropyrrol group is found to be coplanar to the central aromatic ring. The molecules are dimerized through the intermolecular hydrogen bonds at the carboxyl group in the crystal.

• Applied Microscopy
• /
• v.36 no.spc1
• /
• pp.41-46
• /
• 2006

Interfacial atomic structure (chemical structure) of a Pd/ZnO hetero junction was investigated by atomic resolution high voltage transmission electron microscopy (ARHVTEM). A misfit dislocation did not work as a stress accommodation mechanism in the ZnO(0001)/Pd (111) interface. But the periodic stress localization occurred in the ZnO($10\bar{1}0$)/(200) interface. The periodicity of the local strain coincided with that of misfit dislocation. Atomic structure image of the ARHVTEM showed that an atomic arrangement across the interface was in the order of O-Zn-Pd. It was shown that mechanical weakness of the ZnO(0001)/Pd(111) interface against cyclic heating is attributable to the absence of the periodic stress localization of the misfit dislocation.

• (The)Study of the Eastern Classic
• /
• no.59
• /
• pp.359-386
• /
• 2015

To date, the study of the $jh{\bar{a}}peti$ is small. "Osamnanyasinhakbiyoung" was found in the Gumamodo University in 2006, research has gained a new opportunity. The '연약(練若)' of "Osamyunyaksinhakbiyoung(오삼연약신학비용)" is an abbreviation of ara?ya should be unified in "Osamnanyasinhakbiyoung(五衫練若新學備用)". The second volume contains the following information. Since the Buddhist ritual of ordinary people, this made according to fit the rules in accordance with the environment(隨方毗尼). Obok(五服) is called according to the meaning Osam(五衫) of dressed standard. Gamguhyodangdo is to install one incense and one lanterns to illuminate their own buddha, is where enshrines the relics(śarīra). Back to the article, which should show the face bitter and sad hearts. Over white paper it should represent an article. Posts containing the meaning of the sacrifice must necessarily meant to inform heaven as articles for the dead. Such "Osamnanyasinhakbiyoung" of structure and contents of the second volume was reflected in "Sungmoonsanguicho(釋門喪儀抄)". "Osamnanyasinhakbiyoung" written intent is reflected in the prolegomena of the "Sungmoonsanguicho" it influenced $Jh{\bar{a}}peti$-Rites during the Joseon Dynasty. "Osamnanyasinhakbiyoung" of prepare after death and "Sunksiyoram(釋氏要覽)" of funeral was incorporated as "Sungmoonsanguicho". It built the $st{\bar{u}}pa$ is a symbol of tranquility achieved a kind of enlightenment. Human life ends with death, and it completed the $Jh{\bar{a}}peti$-Rites in "Sungmoonsanguicho". The significance here is in. Tying the funeral and burial in one enshrine the relics will be shown on the top by the completion of life. In particular, Kankyungdogam(刊經都監) published in the $Jh{\bar{a}}peti$-Rites "Osamnanyasinhakbiyoung" were engraved production and dissemination. That it will have another significance.