• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.1077-1087
• /
• 2015

The levee protect lifes, houses, and properties by blocking overflow of river. The revetment is forced to be covered on the slope of levee in order to prevent erosion. The stability of revetment is very important enough to directly connected to the stability of levee. In this study, the weak points of revetment on meandering channel were found by movable revetment experiment and the velocity and the water surface elevation (WSE) were measured at main points. The 3-D numerical simulations were performed under same conditions with experiment. And unclear flow characteristics by the limit of measuring instruments were analyzed through numerical simulation. Consequently, the section of large wall shear stress and the failure section are almost the same. Despite of small wall shear stress, the revetments located at right bank were carried away because of circulation zone due to secondary flow by meandering. With existing riprap design formula, the sizes of riprap determined using maximum local velocity were 1.5~4.7 times greater than them using mean velocity. As a result of this study, it is necessary to calculate the size of riprap in other ways for meandering and straight channel. At a later study, if the weighted value considered the radius of curvature and shape of hydraulic structure is applied to riprap design formula, it is expected that the size of revetment was evaluated rationally and accurately.

• Korean Journal of Environmental Biology
• /
• v.32 no.4
• /
• pp.382-388
• /
• 2014

Shortfin eel (Anguilla bicolor pacifica) is a species of commercial importance and its production is greatly affected due to the infection by Heterosporis anguillarum. In this study, we evaluated the effect of H. anguillarum infection on the growth of Shortfin eel. A disease that trunk muscle of cultured shortfin eel, Anguilla bicolor pacifica, were irregular and resulted in death, breakout of the commercial eel culture farm. We observed that the trunk muscle of infected eels were irregular and represented white or yellowish externally. Histopathologically, a great numbers of large or small spores and sporophorocysts were also observed in degenerated muscle layer. The cloning of specific gene of H. anguillarum, encoding small subunit ribosomal RNA (SSU-rRNA) was amplified by the polymerase chain reaction(PCR) from the muscle lesion of diseased eel. The size of clone gene is well matched with the size of small subunit ribosomal RNA of H. anguillarum and thus confirming the infection by H. anguillarum.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.2
• /
• pp.257-269
• /
• 2012

Global crisis expedites the change in the environment of industry and puts small size enterprises in danger of mass bankruptcy. Because of this, domestic small size enterprises is an urgent need of restructuring. Based on the small business data registered in the Credit Guarantee Fund, we estimated the survival probability in the context of the survival analysis. We also analyzed the survival time which are distinguished depending on the types of business in the small business. Financial variables were also conducted using COX regression analysis of small businesses by types of business. In terms of types of business wholesale and retail trade industry and services were relatively high in the survival probability than light, heavy, and the construction industries. Especially the construction industry showed the lowest survival probability. In addition, we found that construction industry, the bigger BIS (bank of international settlements capital ratio) and current ratio are, the smaller default-rate is. But the bigger borrowing bond is, the bigger default-rate is. In the light industry, the bigger BIS and ROA (return on assets) are, the smaller a default-rate is. In the wholesale and retail trade industry, the bigger bis and current ratio are, the smaller a default-rate is. In the heavy industry, the bigger BIS, ROA, current ratio are, the smaller default-rate is. Finally, in the services industry, the bigger current ratio is, the smaller a default-rate is.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.562-577
• /
• 2020

In this study, to conserve the clay seated Vairocana Buddha triad in Seonunsa temple, Gochang (Treasure 1752), the primary materials employed for creating the clay Buddha statues were scientifically analyzed. By analyzing the soil layer constituting the Buddha statues, it is observed that the said layer comprises sand having particle size greater than that of medium sand and soil having particle size smaller than that of fine sand, which were used in a ratio of 7:3, along with the bast fibers of paper mulberry (Broussonetia kazinoki). Hence, the aforementioned soil layer is composed of a mixture of sand and weathered soil, along with bast fibers to prevent scattering. By analyzing the tree species, it is found that the wooden materials constituting the bottom board and the interior of Buddha's sleeves of the Amitabha Buddha statue, Vairocana Buddha statue, and Medicine Buddha statue are hard pines (Pinus spp.). Additionally, three layers are found in the cross section of the gold layer. Furthermore, each of the hair sections of the Buddha statues is composed of earthy materials such as quartz, albite, microcline, mica, and magnetite, and the hair surface was painted by incorporating black materials containing magnetite.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.333-343
• /
• 2012

In-stream large wood (LW) has a critical impact on the geomorphic characteristics relevant to ecosystem management and disaster prevention, yet relatively little is known about variations in its dynamics and subsequent export on the watershed-scale perspective in Korea. Here we review variations in the dynamics and subsequent export of LW as a function of stream size, which is appropriate for Korean mountain streams. In upstream channels with narrow bankfull widths and low stream discharges, a massive amount of LW, resulting from forest dynamics and hillslope processes, may persist for several decades on valley floor. These pieces, however, are eventually transported during infrequent debris flows from small tributaries, as well as peak hydrology in main-stem channels. During the transport, these pieces suffer fragmentation caused by frictions with boulders, and stream bank and bed. Although infrequent, these events can be dominant processes in the export of significant amounts of LW from upstream channel networks. In downstream channels with wide bankfull widths and high stream discharges, LW is dominantly recruited by forest dynamics and bank erosion only at locations where the channel is adjacent to mature riparian forests. With the LW pieces that are supplied from the upstream, these pieces are continuously transported downstream during rainfall events. This leads to further fragmentation of the LW pieces, which increases their transportability. With decreasing stream-bed slope, these floated LW pieces, however, can be stored and form logjams at various depositional sites, which were developed by interaction between channel forms and floodplains. These pieces may decay for decades and be subsequently transported as particulate or dissolved organic materials, resulting in the limitation of LW fluvial export from the systems. However, in Korea, such depositional sites were developed in the extremely limited streams with a large dimension and no flood history for decades, and thus it does not be expected that the reduction of LW export amount, which can be caused by the long-term storage. Our review presents a generalized view of LW processing and is relevant to ecosystem management and disaster prevention for Korean mountain streams.

• The Korean Journal of Quaternary Research
• /
• v.14 no.1
• /
• pp.7-31
• /
• 2000

Quaternary Geological and geophysical investigation was performed at the Eurimji reservoir of Jaechon City in order to interprete depositional environment and genesis of lake sediments. For this purpose, echo sounding, bottom sampling and columnar sampling by drilling on board and GPR survey were employed for a proper field investigation. Laboratory tests cover grain size population analysis, pollen analysis and $^{14}C$ datings for the lake sediments. The some parts of lake bottom sediments anthropogenically tubated and filled several times to date, indicating several mounds on the bottom surface which is difficult to explain by bottom current. Majority of natural sediments were accumulated both as rolling and suspended loads during seasonal flooding regime, when flash flow and current flow are relatively strong not only at bridge area of the western part of Eurimji, connected to stream valley, but at the several conduit or sewage system surrounding the lake. Most of uniform suspend sediments are accumulated at the lake center and lower bank area. Some parts of bottom sediments indicate the existence of turbid flow and mudflow probably due to piezometric overflowing from the lake bottom, the existence of which are proved by CM patterns of the lake bottom sediments. The columnar samples of the lake sediments in ER-1 and ER-3-1 boreholes indicate good condition without any human tubation. The grain size character of borehole samples shows poorly sorted population, predominantly composed of fine sand and muds, varying skewness and kurtosis, which indicate multi-processed lake deposits, very similar to lake bottom sediments. Borehole columnar section, echo sounding and GPR survey profilings, as well as processed data, indicate that organic mud layers of Eurimji lake deposits are deeper and thicker towards lower bank area, especially west of profile line-9. In addition the columnar sediments indicate plant coverage of the Eurimji area were divided into two pollen zones. Arboreal pollen ( AP) is predominant in the lower pollen zone, whreas non-aboreal pollen(NAP) is rich in the upper pollen zone. Both of the pollen zones are related to the vegetation coverage frequently found in coniferous and deciduous broad-leaved trees(mixed forest) surrounded by mountains and hilly areas and prevailing by aquatic or aquatic margin under the wet temperate climate. The $^{14}C$ age of the dark gray organic muds, ER1-12 sample, is 950$\pm$40 years B.P. As the sediments are anthropogenetically undisturbed, it is assumed that the reliability of age is high. Three $^{14}C$ ages of the dark gray organic muds, including ER3-1-8, ER3-1-10, ER3-1-11 samples, are 600$\pm$30 years B.P., 650$\pm$30 years B.P., 800$\pm$40 years B.P. in the descending order of stratigraphic columnar section. Based on the interpretation of depositional environments and formation ages, it is proved that Eurimji reservoir were constructed at least 950$\pm$40 years B.P., the calibrated ages of which ranges from 827 years, B.P. to 866 years B.P. Ancient people utilize the natural environment of the stream valley to meet the need of water irrigation for agriculture in the local valley center and old alluvium fan area.

• Economic Analysis
• /
• v.26 no.1
• /
• pp.1-33
• /
• 2020

Recent discussions about a minimum wage increase (MWI) and its influence on the economy have mainly focused on the quantitative aspects, such as labor costs and employment. However, concerning the qualitative aspects, an MWI could have positive effects by enhancing firm productivity and crowding out marginal firms from the market. These positive effects of an MWI can offset, to some extent, its potential negative effects - increasing labor costs and decreasing employment, among others. In this regard we empirically examine the impact of an MWI on firm productivity (total factor productivity). Using firm level panel data from the manufacturing industry in Korea, we calculate the influence rates of a minimum wage by sector and by firm size (number of workers), and analyze its effects on firm productivity. In particular, the production functions of the firms are estimated by taking into account endogeneity among the input factors, in order to resolve the drawbacks of existing studies - underestimating the capital factor coefficient and overestimating the labor factor coefficient. This study finds that the influences of an MWI on wages, employment, and productivity are substantially different across sectors and firm sizes. While an MWI has shown to have positive influences on productivity growth in the manufacturing industry as a whole, each sector demonstrates a different direction of effect, and the degree of productivity change also varies by sector. The impacts of an MWI on firm productivity are generally estimated to be more negative for smaller firms, but in some sectors the effects are found to be positive. In addition, the wage increases resulting from an MWI seem to cause a productivity enhancement across all sectors in the manufacturing industry. The policy implications of this study are as follows. Considering the empirical findings that an MWI causes an increase in productivity in many sectors of the manufacturing industry, it would be desirable to take into consideration not only the negative side effects but also the positive effects of an MWI when designing any future minimum wage policy. Moreover, in spite of there being a uniform minimum wage, this study finds that the diverse influence rates of a minimum wage across firms have different impacts on wages, employment, and productivity across sectors or firm size. This finding could be conducive to discussions about differentiation among minimum wage schemes by sector or firm size.

• Journal of Microbiology
• /
• v.45 no.2
• /
• pp.158-167
• /
• 2007

In this study, we have cloned a novel cDNA encoding for a papain-family cysteine protease from the Uni-ZAP XR cDNA library of the polychaete, Periserrula leucophryna. This gene was expressed in Escherichia coli using the T7 promoter system, and the protease was characterized after partial purification. First, the partial DNA fragment (498 bp) was amplified from the total RNA via RT-PCR using degenerated primers derived from the conserved region of cysteine protease. The full-length cDNA of cysteine protease (PLCP) was prepared via the screening of the Uni-ZAP XR cDNA library using the $^{32}P-labeled$ partial DNA fragment. As a result, the PLCP gene was determined to consist of a 2591 bp nucleotide sequence (CDS: 173-1024 bp) which encodes for a 283-amino acid polypeptide, which is itself composed of an 59-residue signal sequence, a 6-residue propeptide, a 218-residue mature protein, and a long 3'-noncoding region encompassing 1564 bp. The predicted molecular weights of the preproprotein and the mature protein were calculated as 31.8 kDa and 25 kDa, respectively. The results of sequence analysis and alignment revealed a significant degree of sequence similarity with other eukaryotic cysteine proteases, including the conserved catalytic triad of the $Cys^{90},\;His^{226},\;and\;Asn^{250}$ residues which characterize the C1 family of papain-like cysteine protease. The nucleotide and amino acid sequences of the novel gene were deposited into the GenBank database under the accession numbers, AY390282 and AAR27011, respectively. The results of Northern blot analysis revealed the 2.5 kb size of the transcript and ubiquitous expression throughout the entirety of the body, head, gut, and skin, which suggested that the PLCP may be grouped within the cathepsin F-like proteases. The region encoding for the mature form of the protease was then subcloned into the pT7-7 expression vector following PCR amplification using the designed primers, including the initiation and termination codons. The recombinant cysteine proteases were generated in a range of 6.3 % to 12.5 % of the total cell proteins in the E. coli BL21(DE3) strain for 8 transformants. The results of SDS-PAGE and Western blot analysis indicated that a cysteine protease of approximately 25 kDa (mature form) was generated. The optimal pH and temperature of the enzyme were determined to be approximately 9.5 and $35^{\circ}C$, respectively, thereby indicating that the cysteine protease is a member of the alkaline protease group. The evaluation of substrate specificity indicated that the purified protease was more active towards Arg-X or Lys-X and did not efficiently cleave the substrates with non-polar amino acids at the P1 site. The PLCP evidenced fibrinolytic activity on the plasminogen-free fibrin plate test.

• The Journal of Engineering Geology
• /
• v.24 no.3
• /
• pp.431-440
• /
• 2014

Since the establishment of the Groundwater Act in Korea in 1993, the national policy on groundwater has focused on the preservation and management of groundwater, which should be used only as a subsidiary water resource. However, population growth, increased water demand, climate change, and the need for uniform water distribution have brought changes to groundwater policy, and have led to the prioritization of development projects such as groundwater dams and river bank filtration. Population growth, changes to the water environment, and increased water risks have all played a role in triggering rapid growth within the water industry; the size of the investment in water resources will also continue to increase worldwide. Until now, private wells and bottled mineral water have led the groundwater industry in South Korea. However, a new area of the groundwater industry, which includes the health and medical sciences, employs groundwater properties derived from regional geology, and is growing. This requires the advancement of groundwater research and technical development connected with ICT (Information and Communication Technology) and medical science, and that the public development of groundwater and its various applications is expanded through locating groundwater in the core of the water industry cluster.

• Korean Journal of Ecology and Environment
• /
• v.52 no.4
• /
• pp.285-292
• /
• 2019

Our study was based on the long-term surveys with respect to the major reservoirs located in the Yeongsan and Seomjin river basins. A total of 45 survey sites have been surveyed four times a year from 2008 to 2017. We identified 166 zooplankton species, including 127 rotifers, 26 cladocerans, and 13 copepods. Mean population density and species number of small reservoirs were higher than those of mid and large reservoirs. Considering outliers exceeding the 90th percentile between species occupancy and mean abundance, 10 of 11 habitat generalists were rotifers, and Bosmina longirostris was the only cladoceran. Habitat specialist consisted of three species of rotifers and emerged from one to three survey sites. According to the modularity results, it was found that the survey sites covering the entire river basins were characterized into five groups, which was similar to the classification by maximum water surface areas(MWSA). The result of the eigenvector centrality showed that the size of MWSA had a greater impact on the similarity of zooplankton community structure between reservoirs than the difference in distance between reservoirs. In the case of survey points in near dam or estuary bank of Juam and Youngsan reservoirs, modularity class were separated from other internal survey points of those. Given that the zooplankton interactions may contribute to freshwater functions more than species diversity. These topological features provide new insight into studying zooplankton distribution patterns, their organization and impacts on freshwater-associated function.