• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.2
• /
• pp.60-64
• /
• 2006

In typical video streaming services such as MPEG encoded video, the transmission data sizes change depending on the frame types and the required bandwidth for QoS support also changes as time passes. Accordingly, in video streaming services using the Internet it could happen that the video services stop occasionally due to instantaneous deficiencies of the required bandwidth under unexpected congestion even if the highest priority is allocated to the service by network administration. In this paper, we investigate several methods for bandwidth allocation and traffic engineering to support MPEG video traffic and propose a new method to reduce the transmission delay and enhance the throughput, there by provisioning the QoS requirements. In the proposed scheme, LSPs are established based on temporal variation patterns of the Internet traffic and the CQ_LLQ policing scheme is applied for traffic shaping at the ingress routers. Finally we verified the performance of the proposed scheme via computer simulations using OPNET.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.31-39
• /
• 2010

VoD(Video-on-Demand) servers have to provide timely processing guarantees for continuous media and reduce the storage and bandwidth requirements for continuous media. The compression techniques make the bit rates of compressed video data significantly variable from frame to frame. A VoD system should be able to provide the client with interactive operations such as fast forward and fast rewind in addition to normal playback of movie. However, interactive operations require additional resources such as storage space, disk bandwidth, memory and network bandwidth. In a stored video application such as VoD system, it is possible that a priori disk access patterns can be used to reserve the system resources in advance. In addition, clients of VoD server spend most of their time in playback mode and the period of time spent in interactive mode is relatively small. In this paper, I present the new buffer management scheme that provides efficient support for interactive operations in a VoD server using variable bit rate continuous media. Simulation results show that our strategy achieves 34% increase of the number of accepted clients over the LRU strategy.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.715-720
• /
• 2023

The military is driving innovative changes such as AI, cloud computing, and drone operation through the Fourth Industrial Revolution. It is expected that such changes will lead to a rapid increase in the demand for information exchange requirements, reaching all lower-ranking soldiers, as networking based on IoT occurs. The flow of such information must ensure efficient information distribution through various infrastructures such as ground networks, stationary satellites, and low-earth orbit small communication satellites, and the demand for information exchange that is distributed through them must be appropriately dispersed. In this study, we redefined the DSCP, which is closely related to QoS (Quality of Service) in information dissemination, into 11 categories and performed research to map each cluster group identified by cluster analysis to the defense "information exchange requirement list" on a one-to-one basis. The purpose of the research is to ensure efficient information dissemination within a multi-layer integrated network (ground network, stationary satellite network, low-earth orbit small communication satellite network) with limited bandwidth by re-establishing QoS policies that prioritize important information exchange requirements so that they are routed in priority. In this paper, we evaluated how well the information exchange requirement lists classified by cluster analysis were assigned to DSCP through M&S, and confirmed that reclassifying DSCP can lead to more efficient information distribution in a network environment with limited bandwidth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1527-1552
• /
• 2018

The rapidly-evolving demand of applications using wireless sensor networks in several areas such as building and industrial automation or smart cities, among other, makes it necessary to determine and provide QoS support mechanisms which can satisfy the requirements of applications. In this paper we propose a mechanism that establishes different QoS levels, based on Publish/Subscribe model for wireless networks to meet application requirements, to provide reliable delivery of packet and timeliness. The first level delivers packets in a best effort way. The second one intends to provide reliable packet delivery with a novel approach for Retransmission Timeout (RTO) calculation, which adjusts the RTO depending on the subscriber Packet Delivery Ratio (PDR). The third one provides the same reliable packet delivery as the second one, but in addition, it provides data aggregation trying to be efficient in terms of energy consumption and the use of network bandwidth. The last one provides timeliness in the packet delivery. We evaluate each QoS Level with several performance metrics such as PDR, Message Delivery Ratio, Duplicated and Retransmitted Packet Ratio and Packet Timeliness Ratio to demonstrate that our proposal provides significant improvements based on the increase of the PDR obtained.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.351.1-355
• /
• 1998

Network-based real-time multimedia applications require guaranteed performances of communication service. Also according to increased bandwidth and processing performance in the future high speed networks, it is possible to make multimedia real-time applications such as distributed real-time applications including video conference, medical imaging, and video education. These applications have characteristics of stringent performance requirements in terms of delay, delay jitter and maximum loss rate. This paper proposes a new delay control for Broadband networks with FCFS queueing. The delay control provides an alternative solution to a current problem in real-time communication; traffic distortion, which makes it difficult to meet such real-time requirements. In simulations, it shows that the proposed delay control can guarantee local and end-to-end delay.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.173-180
• /
• 2014

The development process of a L-Band microwave radiometer for remote sensing of soil-moisture are described in this paper. Achieving the development aim of the measurement accuracy within 2% for soil moisture content of 0~50%, the requirements and specifications of the microwave radiometer and its receiver are drawn. The receiver with high gain, high sensitivity is designed and implemented to satisfy these requirements and specifications. The receiver has the bandwidth of 40 MHz, the system gain of 50 dB and the sensitivity of average value 0.19 K, maximum value 0.313K at 1390 MHz.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1308-1318
• /
• 1997

This paper proposes a new touthind algorithm, the Bandwidth-Delay-Loss based Routing(BDLR) algotithm, which supports the selection of an effcienet routing path by cinsidering the characteristics and QoS requirements of intergarted servies over the Untegrated Serives Packet Network(ISPN), and also compareas it with other touting algorithms by simulating their perfomances on the various combinations of the realtime and non-realtime traffic over the ISPN. The simulation shows that the BDLR algorithm takes great advantages on transmisson dealy, the satisfiability of QoS requirements, and the adapation of traffic envirment over the other routing algorithms priposed for ISPN until now.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.304-310
• /
• 2011

The application of time-domain methods in emission measurement instruments allows for a reduction in scan time by several orders of magnitude and for new evaluation methods to be realized such as the real-time spectrogram to characterize transient emissions. In this paper two novel systems for time-domain EMI measurements above 1 GHz are presented. The first system combines ultra-fast analog-to-digital-conversion and real-time digital signal processing on a field-programmable-gate-array (FPGA) with ultra-broadband multi-stage down-conversion to enable measurements in the range from 10 Hz to 26 GHz with high sensitivity and full-compliance with the requirements of CISPR 16-1-1. The required IF bandwidths were added to allow for measurements according to MIL-461F and DO-160F. The second system realizes a system of time-interleaved analog-to-digital converters (ADCs) and has an upper bandwidth limit of 4 GHz. With the implementation of an automatic mismatch calibration, the system fulfills CISPR 16-1-1 dynamic range requirements. Measurements of the radiated emissions of electronic consumer devices and household appliances like the non-stationary emissions of a microwave oven are presented. A measurement of a personal computer's conducted emissions on a power supply line according to DO-160F is given.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.151-156
• /
• 2017

Communication performance requirements are described as QoS parameters in multimedia communication Protocols including SCTP. One of the important QoS parameters is the reliability of the transfer. As a QoS parameter, the reliability defines error detection, report and correction mechanisms. Including SCTP, conventional error control mechanisms, however, do not consider the integrated viewpoint of multimedia data. In this paper, I have designed and proposed the multimedia oriented error control method based on multimedia characteristics. The proposed scheme should have the reduction effect of the communication resources such as frame buffer, procesing power and bandwidth as well as satisfy the requirements of users.

• Journal of Communications and Networks
• /
• v.6 no.1
• /
• pp.68-77
• /
• 2004

In the near future packet networks should support applications which can not predict their traffic requirements in advance, but still have tight quality of service requirements, e.g., guaranteed bandwidth, jitter, and packet loss. These dynamic characteristics mean that the sources can be made to modify their data transfer rates according to network conditions. Depending on the customer&; needs, network operator can differentiate incoming connections and handle those in the buffers and the interfaces in different ways. In this paper, dynamic QoS-aware scheduling algorithm is presented and investigated in the single node case. The purpose of the algorithm is in addition to fair resource sharing to different types of traffic classes with different priorities ?to maximize revenue of the service provider. It is derived from the linear type of revenue target function, and closed form globally optimal formula is presented. The method is computationally inexpensive, while still producing maximal revenue. Due to the simplicity of the algorithm, it can operate in the highly nonstationary environments. In addition, it is nonparametric and deterministic in the sense that it uses only the information about the number of users and their traffic classes, not about call density functions or duration distributions. Also, Call Admission Control (CAC) mechanism is used by hypothesis testing.