• 방송공학회논문지
• /
• 제26권3호
• /
• pp.327-330
• /
• 2021

본 논문에서는 3D 오디오 부호기의 성능 향상을 위해 새로운 잡음 채움 기법을 제안한다. 제안한 잡음 채움 기법에서는 핵심 대역을 IGF 시작 주파수까지가 아니라 MAX_SFB로 설정되는 영역까지로 제한한다. 그리고, IGF 입력 패치의 모든 주파수 영역에 잡음 채움이 수행되도록 한다. 본 논문에서 수정된 잡음 채움 기법의 성능은 MUSHRA 테스트를 통해 평가되었고, 그 결과 기존의 방법보다 우수한 성능을 보임을 입증한다.

• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1122-1128
• /
• 2020

대역 확장(Bandwidth Extension)이란 채널 용량 부족 혹은 이동통신 기기에 탑재된 코덱의 특성으로 인해 부호화 및 복호화 과정에서 대역 제한(band limited)되거나 손상된 협대역 신호(NB, Narrow Band)를 복원, 확장하여 광대역 신호(WB, Wide Band)로 전환 시켜주는 것을 의미한다. 대역 확장 연구는 주로 음성 신호 위주로 대역 복제(SBR, Spectral Band Replication), IGF(Intelligent Gap Filling)과 같이 고대역을 주파수 영역으로 변환하여 복잡한 특징 추출 과정을 거쳐 이를 바탕으로 사라지거나 손상된 고대역을 복원한다. 본 논문에서는 딥러닝 모델 중 오토인코더(Autoencoder)를 바탕으로 1차원 합성곱 신경망(CNN, Convolutional Neural Network)들의 잔차 연결을 활용하여 복잡한 사전 전처리 과정 없이 일정한 길이의 시간 영역 신호를 입력시켜 대역 확장 시킨 음향 신호를 출력하는 모델을 제안한다. 또한 음성 영역에 제한되지 않는 음악을 포함한 여러 종류의 음원을 포함하는 데이터셋에 훈련시켜도 손상된 고대역을 복원할 수 있음을 확인하였다.

• 한국전자통신학회논문지
• /
• 제15권3호
• /
• pp.553-562
• /
• 2020

S 밴드, C 밴드 그리고 X 밴드 레이더는 기상 관측을 목적으로 사용되고 있다. 기상청, 환경부, 공군은 부처별 관측 목적에 따라 레이더를 운용하고 있기 때문에 설치 지점과 관측 특성이 서로 다르다. 기상 관측 관점에서는 지리산과 태백산 인근의 산악 지형을 따라 고도 1 km 이하의 저층 관측의 한계 지역이 나타난다. 소형 레이더 설치를 가정하여 저층 관측 보완을 모의하였다. 또한, 북한 지역의 위험 기상 감시를 위해 북한의 강수를 분석하고 대형 레이더 관측망을 모의하였다. 종합하여 한반도 레이더 관측망 구축안을 제시하였다.

• 한국재료학회지
• /
• 제17권9호
• /
• pp.489-492
• /
• 2007

Temperature and injection current dependence of elctroluminescence(EL) spectral intensity of the $In_{0.27}Ga_{0.73}N/GaN$ multi-quantum-well(MQW) have been studied over a wide temperature and as a function of injection current level. EL peaks also show significant broadening into higher photon energy region with the increase of injection current. This is explained by the band-filling effect. When temperature is slightly increased to 300 from 15 K, the EL emission peak showed red-blue-red shift. It can be explained by the carrier localization by potential fluctuation of multiple quantum well and band-gap shrinkage as temperature increase. It is found that a temperature-dependent variation pattern of the EL efficiency under very low and high injection currents show a drastic difference. This unique EL efficiency variation pattern with temperature and current is explained field effects due to the driving forward bias in presence of internal(piezo and spontaneous polarization) fields.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권1호
• /
• pp.56-65
• /
• 2007

This paper describes physical meanings of various influences of cavity (or pillar) shape and filling factor of dielectric material on band structures in two-dimensional photonic crystals. Influences of circular and rectangular cross-sections of cavity (or pillar) arrays on photonic band structures are considered theoretically, and significant aspects of square and triangular lattices are compared. It is shown that both averaged dielectric constant of the photonic crystal and distribution profile of photon energy play important roles in designing optical properties. For the triangular lattice, especially, it is shown that cavity array with a rectangular cross-section breaks the band structure symmetry. So, we discuss this point from the band structure and address optical properties of lattice with a circular cross-section cavity.

• 한국지반환경공학회 논문집
• /
• 제14권9호
• /
• pp.39-47
• /
• 2013

Local deformations in back filling materials of two sands and one glass bead with different particle shapes behind a rigid retaining wall were studied. Two kinds of boundary conditions were compared: active wall translation and active rotation of the wall about its toe. Effect of the speed of active wall translation was also investigated. The digital image correlation method was used to analyze local deformation developments inside the materials. Test results showed that particle shape and density mainly influence the inclination angle and width of the shear band. The general shear band pattern is strongly dependent on the wall movement mode, while it was little influenced by particle shape. Within a limited range of wall speed in this study, shear band became wider and local deformation became larger with increase of wall speed.

• 한국치위생학회지
• /
• 제4권2호
• /
• pp.277-291
• /
• 2004

The purpose of this study is to analyze the dental hygienists' overall performance in operative restoration and the clinical performance in operative restoration according to dental hygienists' career and to provide basic data for establishing the appropriate range of dental hygienists' work. Subjects of this study are 339 dental hygienists working at dental clinic and hospital nationwide, selected by their working place, career, type of clinic, and location of clinical institution. The distribution of people who responded to the survey shows that 81 belong to beginner level(less than 2 years since entering clinic), 115 intermediate level(2 to 3 years since entering clinic), 81 higher level(4 to 5 years since entering clinic) and 62 advanced level(more than 6 years since their entering clinic). In terms of the types of clinical institution, 178 belong to dental clinics and 161 belong to dental hospitals. The survey used in this study are focused on perception about clinical performance in operative dentistry and adequacy of the work. Operative dentistry consists of operative restoration and endodontic therapy. The operative restoration consists of 15 categories such as patient welcoming, examination and diagnosis, planning of treatment, anesthesia, control of moisture, cavity preparation, pulp protection, matrix band application, amalgam filling, resin filling, glass ionomer cement filling, abrasive strip removal, rubber dam removal, bite check and polishing, patient education, and arrangement. The reliability was Cronbach's Alpha .9453. SPSS 10.0 for Windows was used to analyze the responses. One way ANOVA was utilized to verify the differences in the dental hygienists' job performance in operative restoration and their job performance according to career. When significant difference was found. Duncan multi comparison post hoc was done. To sum up the results of this study, patient welcoming look the first place in the operative restoration. It was followed by patient education, examination and diagnosis, introducing treatment plan, resin filling, glass ionomer cement filling, amalgam filling, bite check and polishing, anesthesia, pulp protection, control of moisture, abrasive strip removal, cavity preparation, matrix band application, rubber dam removal, and anesthesia. In terms of the clinical performance by career, there were significant differences in 19 activities such as medical eraluation, oral examination, patient charting, intra oral readio graphs, firm developing fixing mounting, curing light gun, education of attention content after operation. Based on the results of this study, the specific range of operative restoration for dental hygienists should be focused on providing basic data for dentists' diagnosis, alleviation of fear and aching accompanied by injection and anesthesia, data providing for dentists' decision of anesthesia degree, and maximization of control of moisture.

• 호남수학학술지
• /
• 제32권1호
• /
• pp.73-76
• /
• 2010

In this paper we investigate the distances between Dehn fillings on a hyperbolic 3-manifold that yield 3-manifolds containing a M$\"{o}$bius band and a Klein bottle.

• 한국전자파학회논문지
• /
• 제20권9호
• /
• pp.1003-1013
• /
• 2009

국내 환경의 경우, 산악 지형이 많은 지형적 특성상 수많은 터널이 존재한다. 터널은 무선 채널 환경 중 대표적인 음영지역으로서 실외 및 실내 환경의 무선 채널과는 다른 특성을 갖기 때문에 터널 환경에서의 안정된 서비스 품질을 확보하기 위해서는 전파 채널의 특성 연구가 필요하다. 특히 위성을 이용한 이동 서비스를 위해서는 터널에 의한 음영지역에서의 정상적인 위성 신호 수신이 필요하며, 이를 위해 Gap-Filler라고 하는 지상 중계기를 운영하게 되는데 이를 이용하기 위해서는 터널 환경에서의 전파전파 특성 분석을 바탕으로 한 Gap Filling 방법 연구가 필수적이다. 따라서 본 논문에서는 음영 지역에서의 정상적인 위성 신호 수신을 위하여 터널 환경에서의 ISM 대역의 전파전파 특성을 분석하고, 이를 바탕으로 효율적인 Gap Filling 방법에 대한 연구를 수행하였다.

• Restorative Dentistry and Endodontics
• /
• 제7권1호
• /
• pp.77-83
• /
• 1981

The purpose of this study was to observe the bonding strength between tooth surface (enamel and dentin) and restorative filling materials which are two composite resins (Clearfil and Concise) and Glass ionomer cement, after etching with 50% phoshoric acid and 37% citric acid. To measure the bonding strength in enamel, the labial surface of upper anterior tooth was cut flatly with using carborundum disk and polished with sand paper disk, and to measure in dentin, the dentin surface was prepared by grinding upper part of posterior tooth horizontally. After washing the tooth surface with water and drying with air blast, the prepared tooth surface was etched. In glass ionomer cement, 50% phosphoric acid and 37% citric acid were used, in Clearfil 40% phosphoric acid was used and in Concise, 50% phosphoric acid and 37% citric acid were used as etchant for 1 minute. After the copper band which is 5 mm in diameter and 5 mm in height was fixed on the prepared surface and each filling material was inserted into the copper band, the hooking loop was inserted into filled material in the copper band before setting to make it easily that the load is applied on the specimen. After all specimens were immersed in water at $37^{\circ}C$ for 1 week, this specimen was placed on the load cell of tensile test apparatus, and specimen was pulled at the cross-head speed of 0.8 mm per minute. The following results were obtained 1) In glass ionomer cement, the bond strength obtained by 37% citric acid was higher than one obtained by 50% phosphoric acid in enamel and dentin surfaces. The bond strength obtained in non-etched surface was much less than one by etchants in enamel and dentin surface. 2) In Clearfil, the bond strength obtained by 40% phosphoric acid was 4 times more than one obtained by non etch ant. 3) In Concise, the bond strength obtained by 50% phosphoric acid was almost same as one obtained by 37% citric acid, and the bond strength obtained by non etch ant was much less than one obtained by etchants.