• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.193-196
• /
• 2000

A new type low-pass filter design method based on a coupled line and transmission line theory is proposed to suppress harmonics by attenuation poles in the stop band. The design formula are derived using the equivalent circuit of a coupled transmission line. The new low-pass filter structure is shown to have attractive properties such as compact size, wide stop band range and low insertion loss. The seventh-order low-pass filter designed by present method has a cutoff frequency of 0.9 CHz with a 0.01 dB ripple level. The coupled line type low-pass filter with strip line configuration was fabricated by using a high-temperature superconducting (HTS : YBa$_2$Cu$_3$O$_{7-{\delta}}$ thin film on MgO(100) substrate. Since the HTS coupled tine type low-pass filter was proposed with five attenuation poles in stop band such as 1.8, 2.5, 4, 5.5, 6.2 GHz. The fabricated low-pass filter has improved the attenuation characteristics up to seven times of the cutoff frequency.

• 한국통신학회논문지
• /
• 제10권6호
• /
• pp.317-326
• /
• 1985

신호의 $90^{\circ}$위상차 분배/합성이 가능한 Quadrature Hybrid는 Image Rejection Mixer등에 널리 쓰이고 있으며, 특히 VHF대 위성통신을 행할 경우에는 집중정수형으로 제작하는 것이 대단히 유리하다. 이 경우 자기결합을 갖게 되면 제작이 곤란하므로 자기결합을 갖지 않는 형식으로 광대역 특성을 갖는 소자를 설계하는 것은 대단히 중요하다. 본 연구에서는 자기결합을 갖지 않는 90Hybrid의 기본회로를 제안하고, 이 기본회로를 Phase Shifter를 이용하여 Cascade 로 연결하고 최적화함으로써 광대역화하는데 성공하였다. 여기서 설계한 Hybrid 는 약 54%의 대역폭을 가지며, Branch-Guide Type방향성 결합기에 비하여 훨씬 더 우수한 특성을 가짐을 입증하였다. 또한, 실험에 의하여 제안한 설계법의 타당성을 확인하였다.

• 한국정보전자통신기술학회논문지
• /
• 제8권2호
• /
• pp.128-132
• /
• 2015

논문은 이중 급전을 갖는 마이크로스트립 이중 모드 대역 통과 필터를 제안한다. 제안된 필터는 이중 모드 구현을 위해 모서리 부분을 제거되고, 직교 슬롯을 포함하는 정사각형 패치와 이중 급전 구조로 구성된다. 직교 슬롯은 공진기의 소형화 및 불요신호를 억압하기 위해 사용되고, 상측 차단 대역에서의 차단 특성을 개선하기 위해 이중 급전 구조를 사용하였다. 보다 자세한 필터 설계 방법 및 특성 결과를 본문에 기술하였다.

• ETRI Journal
• /
• 제46권2호
• /
• pp.218-226
• /
• 2024

This paper presents a novel circular fractal ring monopole antenna for ultra-wideband (UWB) hardware with dual band-notched properties. The proposed antenna consists of four crescent-shaped nested rings, a tapered feeding line at the front of the dielectric material, and a semicircular ground plane on the backside. In this design, the nested rings are used both as a radiation element and a band rejection element. The proposed antenna has a bandwidth of 9.03 GHz, which works efficiently in the range of 2.63 GHz-11.66 GHz with the dual notched bands of Worldwide Interoperability for Microwave Access (WiMAX) at 3.15 GHz-3.66 GHz and wireless local area network (WLAN) at 4.9 GHz-5.9 GHz, respectively. The antenna has a compact size of 20 mm × 30 mm × 1 mm (0.177 × 0.265 × 0.0084 λ0) and is implemented using a flame-retardant type 4 (FR4) material. It has a maximum gain of approximately 4 dB in its operating range, and experimental results support the simulation predictions with high accuracy. The findings of this study imply that the designed antenna can be utilized in UWB applications.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2004년도 하계종합학술발표회논문초록집
• /
• pp.363-363
• /
• 2004

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.333-334
• /
• 2007

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.142-143
• /
• 2003

EDFA의 이득(gain)과 잡음지수(noise figure)는 매우 중요한 특성 중의 하나이다. 전송 시스템에서 필연적으로 발생하는 ASE 잡음을 제거하는 것이 중요하다. EDFA의 중간에 필터(filter)와 아이솔레이터(isolator)를 삽입하여 불필요한 ASE를 제거함으로써 이득과 잡음지수를 향상시킬 수 있으며, 기존의 단일경로(single-pass) EDFA에서 필터의 위치가 40-60％ 근처에서 이득과 잡음지수 향상이 가장 크게 된다. 그러나, 거울(mirror)을 사용하여 증폭 효율을 높인 이중경로(double-pass) EDFA에서 필터에 의한 이득 향상에 관한 연구발표는 아직까지 없다. (중략)

• Journal of information and communication convergence engineering
• /
• 제9권6호
• /
• pp.652-656
• /
• 2011

In this paper, a transmitter-based multipath processing and inter-channel interference (ICI) cancellation scheme for a ultra-wideband (UWB) spatial multiplexing (SM) multiple input multiple output (MIMO) system is presented. It consists of taps delayed lines and zero-forcing (ZF) filters in the transmitter and correlators in the receiver. For a UWB SM MIMO system with N transmit antennas, M receive antennas, and Q resolvable multipath components, the BER performance of a linear transmit ZF scheme is analyzed in a log-normal fading channel and also compared with that of a receiver-based ICI rejection approach. It is found that when M ${\leq}$ N, the transmit ZF processing approach outperforms the ZF receiver while making the mobile units low-cost and low-power.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2733-2736
• /
• 2003

This paper proposes a dry-type active surface EMG electrode for the myoelectric prosthetic hand. The designed electrode is small size for embedding in the socket of prosthetic hand, and it has three leads including the reference of signal. To acquire EMG signal rejected the power noise, a precision differential amplifier and various filters such as the band pass filter band rejection filter, low pass and high pass filter are embedded on the electrode. The final output of the electrode is integrated absolute EMG (IEMG) obtained by full rectifier and moving average circuits. From experimental results using the implemented dry-type active surface EMG electrode, the proposed electrode is feasible for the myoelectric prosthetic hand.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1564-1568
• /
• 1987

A design methodology for front ends of a Direct Broadcasting satellite (DBS) Receiver for X-band was reported by utilizing Monolithic Microwave Integrated Circuits (MMIC) technology. The frequency converter including a three-stage low-noise amplifier, a image frequency rejection filter, and a mixer and buffer amplifier was designed by a Home-made CAD program. The results of computer simulation using the CAD program showed that overall gain was over 36.63dB, and noise figure below 2.55dB, respectively.