• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.575-579
• /
• 2004

Package reliability test was conducted to investigate the effect of solder paste composition at BGA Package. It was found that the shape and size of the phase form are affected by the processing parameters. The material have used to fill in the via was Sn/36Pb/2Ag and Sn/0.75Cu type solder paste. Sn/36Pb/2Ag and Sn/0.75Cu paste were fabricated on Tape-BGA substrates by screen printing process, and via ball mount data were characterized with variations of dwell time of 85 seconds at reflow peak temperature at 22$0^{\circ}C$ or 24$0^{\circ}C$. The test condition was MRT 30 $^{\circ}C$/60 %RH/96 HR. Failures formed of a ball-off in solder paste process were observed by using a Optical Microscope and SEM(Scanning Electron Microscope). It was concluded that intermetallic layer growth played important roles in increasing solder fatigue strength for addition of Ag composition. The degradation of shear strength of solder composition is discussed.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.191-199
• /
• 2007

This study was conducted to examine the biomechanical characteristics of open spike in the volleyball to improve the technique of the volleyball spike. The subjects were six male college and high school athletes. The motions of volleyball spike were filmed by using two Sony VX 2000 Video Cameras. The mechanical factors were angle and angular velocity of body segments in the upper and the lower limbs. The conclusions were as follows; 1. The angle of the shoulder joint of the skilled showed larger than that of the unskilled in impacting of the volley ball spike. 2. The angle of the elbow joint of the skilled showed larger than that of the unskilled in impacting of the volley ball spike. 3. The angle of the wrist joint of the skilled showed smaller than that of the unskilled in impacting of the volley ball spike. 4. The angle of the hip joint of skilled showed larger than that of unskilled in impacting of the volley ball spike. 5. The angle of the knee joint of the skilled and the unskilled showed same in take off and impacting of the volley ball spike, and that of the skilled showed smaller than that of the unskilled in take-off touchdown and touchdown after impact of the volley ball spike. 6. The angle of the ankle joint of skilled showed larger than unskilled in take-off of the volley ball spike. 7. The angular velocity of the shoulder joint, elbow joint, wrist joint of the skilled showed faster than that of the unskilled in impacting of the volley ball spike. Taken together the result of them, I have come to conclusion that knee joint angle in touchdown of the take off should be decreased and knee joint angle in take off should be increased, and then stability of the take off should be made and, and that extension of the elbow joint should be made and wrist joint angle decreased and shoulder and hip joint angle increased, and then C.O.G of the arm and hand should be positioned ahead C.O.G of the body in impacting for effective impact of the spike, and that the transfer of the angular velocity of body segments for effective impact of the spike make from the proximal segment to the distal segment at spike in volleyball.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1039-1046
• /
• 2002

To investigate the characteristics of orifice as an expansion devices, the experimental apparatus was made and experiments are being peformed using R22 and R290. The main idea of this control method of refrigerant flow rate with coupled orifices is to control the ON/OFF state of T and Ball type orifice corresponding to the subdivided region of thermal load. When system requires minimum thermal load, both T and Ball type orifices are closed, but refrigerant can flow through small hole of T type orifice. In regular thermal load, when ball type orifice is closed, T type orifice is opened and mass flow rate increase more than OFF state of T type orifice, due to large diameter. In maximum thermal load, both T and Ball type orifices are open and the much refrigerant can flow. The flow characteristics on T type orifice and parallel-combined orifice are obtained in the subdivided region of thermal load.

• 한국항해항만학회지
• /
• 제34권7호
• /
• pp.553-558
• /
• 2010

This study presents the optimization design process of a segment ball valve that involves the reduction of the flow resistance coefficient and the satisfaction of the strength requirement. Numerical analysis of fluid flow and structural analysis have been performed to predict the flow resistance coefficient and the maximum stress of a segment ball valve. In this study, a segment ball valve incorporating the advantages of a ball valve and a butterfly valve has been devised. In general, ball valves are installed in a pipe system where tight shut off is required. Butterfly valves having smaller end-to-end dimension than ball valve can be installed in narrow spaces in a pipe system. The metamodels for the shape design of a segment ball valve are built by the response surface method and the Kriging interpolation model.

• 청정기술
• /
• 제23권1호
• /
• pp.64-72
• /
• 2017

본 연구에서는, $150{\sim}400^{\circ}C$ 영역에서 $NO_x$를 제어하기 위한 ball mill 기법을 사용한 선택적 환원촉매(SCR)의 연구를 수행하였다. 제조된 촉매들의 구조적 특성 및 산화가 특성을 확인하기 위하여 XRD, BET, XPS 분석을 수행하였다. 다양한 ball mill 기법에 의해 제조된 촉매는 $250^{\circ}C$ 이하의 온도구간에서의 활성의 차이를 보였다. 이중 가장 우수한 탈질효율을 갖는 촉매를 기준으로, ball mill 시간이 3시간일 때 가장 높은 활성을 나타내었다. XPS 분석 결과, vanadium의 비 화학양론종의 존재 및 원자 수 증가가 활성증진에 유리하게 작용한 것으로 나타났다. 또한 $O_2$ on-off 실험을 통해 격자산소량의 양과 탈질 효율과의 상관관계를 나타내었고, 이는 서로 비례관계에 있음을 확인하였다.

• 한국전문물리치료학회지
• /
• 제16권1호
• /
• pp.18-24
• /
• 2009

The purpose of this study was to assess the effect of bridging stabilization exercises on trunk muscles activity on and off a Swiss ball. 20 healthy university students volunteered to participate in this study. Subjects were required to complete following four exercises: exercise 1, single bridging exercise; exercise 2, feet on ball bridging exercise; exercise 3, calf on ball bridging exercise; exercise 4, back on ball bridging exercise. Surface electromyography from selected trunk muscles was normalized to maximum voluntary isometric contraction. A repeated measures of ANOVA with post-hoc Bonferroni's correction was used to determine the influence of exercise type on muscle activity for each muscle and descriptive statistics was used to determine local/global muscle ratios. The rectus abdominis of exercise 4 showed significantly higher muscle activity than rectus abdominis of exercise 1, 2, 3 (p<.05). The external oblique of exercise 2, 4 showed significantly higher muscle activity than external oblique of exercise 1 (p<.05). The internal oblique of exercise 2, 4 showed significantly higher muscle activity than internal oblique of exercise 1 (p<.05). The erector spinae of exercise 2, 3, 4 showed significantly higher muscle activity than erector spinae of exercise 1 (p<.05). Median of internal oblique/rectus abdominis ratio of exercise 1 was 1.16, exercise 2 was 2.43, exercise 3 was 2.45, exercise and 4 was 1.27. Median of internal oblique/external oblique ratio of exercise 1 was 1.01, exercise 2 was .91, exercise 3 was .99, and exercise 4 was .93. Muscle activity can be influenced by addition of a Swiss ball in bridging exercises. It is recommend to use a Swiss ball for trunk stabilization exercise.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.935-936
• /
• 2009

In this paper, we describe the basic operating mechanism of our novel reflective display, Fast Moving Ball Actuator (FMBA) mode[1], using micro-sized metal coated polymer ball in fluid medium. Metal surface of the ball can be charged up by contact electrode and their locations can be controlled by applied field to obtain optically on and off state. In the medium with high viscosity, the response speed of the moving ball might be reached into their terminal velocity and changed in proportion to the frequency of applied voltage on the electrodes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.243-244
• /
• 2009

콘크리트가 가지는 취성적인 단점을 해결하기 위한 방법의 하나로 강섬유가 제안되고 있다. 강섬유의 혼입으로 콘크리트 구조물은 혼입전의 취성적인 특성에 벗어나 상당한 연성을 지니게 되는 효과를 가지게 된다. 하지만 이렇듯 강섬유가 혼입된 콘크리트는 시공성의 저하 및 fiber ball 현상으로 인한 성능발휘에 문제점이 제기된다. 이러한 섬유 보강 콘크리트가 가지는 취약한 유동성과 fiber ball 현상이라는 약점들을 개선하고 시공의 효율성을 증대시키기 위해서 위에 언급된 두 가지 콘크리트가 접목된 섬유 보강 자기충전 콘크리트에 대한 연구의 필요성이 재기된다.

• Current Photovoltaic Research
• /
• 제4권4호
• /
• pp.140-144
• /
• 2016

In this paper, core-shell structure of nickel/gold (Ni/Au) conductive layer on poly-methyl-methacrylate (PMMA) micro-ball was fabricated and its conduction property was investigated. Firstly, PMMA micro-ball was synthesized by using dispersion polymerization method. Size of the ball was $2.8{\mu}m$ within ${\pm}7%$ deviation, and appropriate elastic deformation of the PMMA micro-ball ranging from 31 to 39% was achieved under 3 kg pressure. Also, 200 nm thick Ni/Au conductive layer was fabricated on the PMMA micro-ball by uniformly depositing with electroless-plating. Adhesion of the conductive layer was optimized with help of surface pre-treatment, and the layer adhered without peeling-off despite of thermal expansion by collision with accelerated electrons. Composite paste containing core-shell structured particles well cured at low temperature of $130^{\circ}C$ while pressing the test chip onto the substrate to make electrical contact, and electrical resistance of the conductive layer showed stable behavior of about $6.0{\Omega}$. Thus, it was known that core-shell structured particle of the Ni/Au conductive layer on PMMA micro-ball was feasible to flexible electronics.

• 한국산학기술학회논문지
• /
• 제17권12호
• /
• pp.446-452
• /
• 2016

최근 해양, 석유화학 플랜트 등에서는 내마모, 내식성, 내열성이 요구되는 초내열 합금이 기본적인 구조재료로 많이 사용되고 있다. 하지만 고가의 초내열 합금 소재로 밸브를 제작할 때 원가 상승과 가격 경쟁력 저하의 원인이 되고 있다. 이에 유체에 흐르는 특정부위만 육성 용접하는 기술이 효과적인 방법으로 사용되고 있다. 하지만 기존의 볼 육성용접의 경우 사람이 직접 수동으로 작업을 진행하기 때문에 많은 시간이 소요되고 정확한 용접하기 어렵다. 이러한 문제를 해결하기 위해 볼 밸브용 볼 육성용접을 균일하게 할 수 있는 로봇자동화 시스템을 개발하였다. 이 시스템은 용접토치를 장착한 용접용 로봇 6축, 포지셔너 회전을 위한 부가 2축, 제어장치 및 로봇경로는 오프라인 프로그램으로 구성되어 있다. CAD 도면 데이터를 오프라인 프로그램에 입력하여 로봇 교시점과 로봇 구동 소스를 얻을 수 있도록 하였고, 볼 육성용접 궤적은 Matlab을 통해 구현하였다. OLP 시스템을 통해 용접층 두께가 균일하게 얻으므로 용가재의 소모량을 약 20% 절약할 수 있었고, 모재와 용접봉 사이의 아크길이를 일정하게 유지하여 육성용접 불량율을 약 50% 정도 감소시켜 품질을 확보하였다. OLP를 활용한 육성용접 자동화 시스템을 통해 작업소요시간이 88시간에서 41시간으로 단축되어 생산성이 2.58배 향상 되었다.