• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1654-1663
• /
• 1994

Even if the ball bearing was conservatively designed considering the dynamic capacity and the rating life, sometimes the bearing was early failed on account of the misalignment and the lubricant contaminations etc. Misalignment was generated when bearing-shaft system transmitted large power and when the bearing was inadequately mounted. It was possible to predict the fatigue life of ball bearing under the misalignment considering the motions of ball, cage and raceway, and the factors of the effect on fatigue life. Misalignment affected on ball bearing as radial and moment load and the relationships between misalignment and moment were obtained. In this paper, the analysis of the load distributions between ball and raceway, and the prediction of fatigue life of deep groove ball bearing under radial and moment loads were carried out. And, the new formulation of equivalent dynamic load considering the effects of moment load was proposed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.993-993
• /
• 2014

Increasing the density magnetic recording of a hard disk drive needs to improve position control of a slider. We have troubles analyzing position of a slider by nonlinear property of pivot ball bearing. Many researches analyze a hard disk drive to change pivot ball bearing part from balls to springs. Pivot ball bearing operates by rotation and movement of balls. This study considers Hertzian contact force when balls contact with outer race to analyze nonlinear movement of a ball bearing. Experiment of this study measures movement of a circular center of a pivot ball bearing. We also verify the simulation results and the experiment results.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.656-661
• /
• 1995

Ex-AUC 공정으로 제조된 $UO_2$ 분말에 대하여 ball-milling 시간 (0-4 시간)에 따른 분말의 특성변화 그리고 성형성(성형압력 구간 : 200~400 MPa)을 조사하였다. ex-AUC $UO_2$ 분말에서는 그 입자크기가 비교적 커서 (평균 입자크기 : 28$\mu\textrm{m}$) ball-milling 의 효과가 크게 나타났다. Ball-mill 에 의한 분말입자의 미세화효과는 1 $\mu\textrm{m}$ 보다 큰 크기를 갖는 분말입자에서 주로 나타났다. 또한 ball-milling 에 의해 최대로 감소될 수 있는 분말입자 크기는 약 0.5$\mu\textrm{m}$로 나타났다. Ball-milling 시간에 따라 분말입자 크기는 감소하였으며, 동일한 성형조건하에서 ball-milling 처리된 분말의 성형밀도는 원료분말의 것에 비하여 증가하였다. 이것은 ball-milling 처리에 의해 미분쇄된 분말입자에 기인되는 것으로 나타났다.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2322-2329
• /
• 2008

In this study, we introduce the design methodology of an optimized fuzzy cascade controller with the aid of particle swarm optimization(PSO) for ball & beam system. The ball & beam system consists of servo motor, beam and ball, and remains mutually connected in line in itself. The ball & beam system determines the position of ball through the control of a servo motor. We introduce the fuzzy cascade controller scheme which consists of the outer(1st) controller and the inner(2nd) controller as two cascaded fuzzy controllers, and auto-tune the control parameters(scaling facrors) of each fuzzy controller using PSO. For a detailed comparative analysis from the viewpoint of the performance results and the design methodology, the proposed method for the ball & beam system which is realized by the fuzzy cascade controller based on PSO, is presented in comparison with the conventional PD cascade controller based on serial genetic alogritms.

• 대한물리의학회지
• /
• 제8권4호
• /
• pp.647-653
• /
• 2013

PURPOSE: The purpose of this study was to compare the lower extremities muscle activation between squatting exercise with gym ball and wall for improving muscle strengthening in lower extremities. METHODS: Participants were 21 university students (males 10, females 11) who didn't have any problem with orthopedic surgery. Participants performed squatting exercise with gym ball and wall. Squatting exercise with gym ball were performed using by gym ball behind back, and the gym ball were fixed in back and wall. We asked participants to push back the gym ball slightly to prevent fall of ball. Wall squatting exercise, we ask participants to contact their back in wall slightly in order to prevent trunk flexion during performed squatting exercise. Each squatting exercise had performed until knee joint were flexed at 60 degree, and maintained five seconds. We collected data from E.M.G of Biceps femoris, Gastrocnemius, Vastus medialis and lateralis, Tibialis anterior of lower extremity in isometric phase of knee joint angle 60 degree of each squatting exercise. We analysed data using by ANOVA and independent t-test of SPSS PC ver.20.0 in order to compare the muscle activation between squatting exercise with gym ball and wall. RESULT: All of lower extremities muscle activation showed more higher value in squatting exercise with gym ball than squatting exercise with wall, especially there was significantly difference of muscle activation in vastus medialis, tibialis anterior between squatting exercise with gymball and with wall. CONCLUSION: On comprehensively considering the results of the present study, we suggested that squatting exercise with gym ball was more effective method improving lower extremity muscle strengthening.

• 한국응용과학기술학회지
• /
• 제36권2호
• /
• pp.448-455
• /
• 2019

본 연구는 오르막 퍼팅 시 좌, 우 경사에 따른 볼의 움직임이 어떻게 변화되는지에 대해 알아보는 것을 목적으로 한다. 본 연구를 위해 한국프로골프협회에서 15년 이상의 골프경기 경험이 있는 피험자들이 참여하였고, 본인들의 퍼터를 이용하여 실제 그린과 유사한 환경에서 퍼팅 동작을 수행하였다. 비디오 카메라를 이용하여 피험자들의 오르막 그린 경사에 따른 퍼팅 동작을 수집 후 동작분석을 실시하였으며, 통계적 유의수준을 a=.05로 설정하였다. 연구결과로 좌, 우 경사별 오르막 퍼팅에서 볼의 위치가 왼쪽에서 오른쪽으로 위치 할 때 볼 움직임의 속도와 각속도가 증가하는 것이 확인되었으며, 여러 경사도 중 성공률을 높여야 하는 오르막 퍼팅에서 경사에 따른 어드레스 볼 위치를 변화할 때, 임팩트 시 클럽 페이스와 볼 움직임이 어떻게 변화하는지를 검증하고, 현장적용 측면에 도움을 주는 과학적 자료를 제시하고자 본 연구를 진행하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권2호
• /
• pp.61-71
• /
• 2002

This paper presents the dynamic analysis of indeterminate rotor systems with angular contact ball bearings subject to axial and radial loads. The reaction forces against applied radial loads significantly influence the dynamic characteristics of angular contact ball bearings. However, the reaction forces are hard to determine in the case of indeterminate rotor-bearing systems. To this end, this paper proposes a finite element model for indeterminate rotor systems with angular contact ball bearings. An improved bearing model is adopted which is originated from the Harris's bearing dynamic model. The bearing model is also extended to include centrifugal forces due to the ball and inner ring. This paper utilizes a new iterative algorithm for general, indeterminate rotor systems with angular contact ball bearings. This examples are provided to illustrate the dynamic characteristics of rotor systems with angular contact ball bearings subject to axial and radial loads. The experimental and numerical results prove that the proposed method is useful for the dynamic analysis of indeterminate rotor systems with angular contact ball bearings.

• 한국의류산업학회지
• /
• 제17권5호
• /
• pp.815-827
• /
• 2015

This study analyzes the characteristics by age and type for middle aged and elderly women foot shapes aged 40-69 years. ANOVA, factor, and cluster analyzed middle aged and elderly women's foot shapes. The results of the study are as follows. First, higher age groups tended to have smaller foot lengths, ball/instep circumferences, circumferences, and ball heights with larger heel height values and higher degrees of gathering of toe 1 and toe 5 toward the feet reference axis. Second, foot lengths were 220 mm-240 mm and the ball circumference's size symbol in high frequency sections were distributed from E to EEEE in the 40s and 60s groups and from D to EEEE in the 50s group. Third, eight factors were extracted through the factor analyses of middle aged and elderly women's foot measurement items. Fourth, a cluster analyses classified the subjects into four types. Type 1 is a normal foot type with medium foot length and small ball circumference and type 2 is a long and flat foot type with a type with large foot length and ball circumference values as well as small ball height values. Type 3 is a thick foot type with a medium foot length, large ball circumference, large ball height and type 4 is a toe deformation foot type with medium foot length, small ball circumference, and a high degree of toe gathering toward the center.

• 한국산업융합학회 논문집
• /
• 제15권1호
• /
• pp.5-11
• /
• 2012

The Buckling of the member under compressive stress is likely to occur, which is an important factor determining the strength of structures. The objective of this study was to evaluate the member buckling strength of a circular hollow steel with ball joints and to compare with design specifications for load resistance factor of our country. Furthermore, we would like to suggest basic data for evaluation of buckling length of a circular hollow steel with ball joints according to comparative analysis. These results were summarized as follows: Buckling stress according to the test results on buckling was 1.21 times greater than LSD specifications of our country estimated the entire length of circular hollow steel with ball joints as buckling length. In addition, it was 1.16 times greater than when estimating the length except the ball as buckling length and 1.14 times grater than when excluding the ball and sleeve. Therefore, when estimating buckling stress of circular hollow steel with ball joints, their buckling length may be measured by the length except ball and sleeve.

• 소음진동
• /
• 제11권2호
• /
• pp.336-345
• /
• 2001

This research presents a nonlinear model to analyze the ball bearing nitration due to the waviness in a rigid rotor supported by multi-row ball bearings. The waviness of a ball and each races is modeled by the superposition of sinusoidal function, and the position vectors of inner and outer groove radius center are defined with respect to the mass center of the rotor in order to consider five degrees of freedom of a general rotor-bearing system. The waviness of a ball bearing is introduced to these position vectors to use the Hertzian contact theory in order to calculate the elastic deflection and nonlinear contact force resulting from the waviness while the rotor has translational and angular motion. They can be determined by solving the nonlinear equations of motion with five degrees of freedom by using the Runge-Kutta-Fehlberg algorithm. Numerical results of this research are validated with those of prior researchers. The proposed model can calculate the translational displacement as well as the angular displacement of the rotor supported by the multi-row ball bearings with waviness. It also characterizes the nitration frequencies resulting from the various kinds of waviness in rolling elements, the harmonic frequencies resulting from the nonlinear load-deflection characteristics of ball bearing. and the sideband frequencies resulting from the waviness interaction.