• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.188.1-188.1
• /
• 2012

인공위성에 사용되는 배터리 기술은 1960년대 최초로 사용된 니켈 카드뮴(NiCd)을 시작으로 발전하기 시작해서 현재는 리튬-이온(Li-Ion)에 이르렀다. 리튬-이온 배터리는 높은 Energy Density(작은 크기와 무게), 낮은 자가 방전율을 가짐과 동시에 메모리 효과가 거의 없다는 장점이 있다. 하지만 리튬-이온 배터리 팩의 성능(Voltage, Capacity, Lifetime)은 사용된 Cell간 특성차이(State of Charge, Total Capacity Difference, Internal Impedance)에 의해 제한된다. 일반적으로 배터리는 원하는 전압과 용량을 확보하기 위해 직렬-병렬 혹은 병렬-직렬 구조를 가지는 팩 형태로 제작 된다. Cell간 특성차이가 존재하는 상태에서 배터리 팩을 사용할 경우 특정 Cell의 과충전 및 과방전이 발생하며 이로 인해 수명이 단축될 수 있고 심한 경우 폭발이 발생할 수 도 있다. 또한 Cell간 특성차이는 배터리팩의 사용가능 용량을 제한하는 효과를 가져 온다. 본 논문에서는 Battery 팩을 구성하는 Cell들에 특성 차이가 존재할 경우 발생할 수 있는 Battery 팩의 수명 단축 및 용량 감소 Mechanism에 대해서 고찰한다. 또한 Cell간 특성차이를 극복하기 위해 실제 위성 운용에 적용될 수 있는 배터리팩의 Balancing 방안과 함께 위성에 장착을 위해 보관중인 4p12s Battery의 Balancing 방안에 대해 고찰하고 Balancing 전후의 Cell간 특성(Voltage Dispersion) 차이 측정결과를 보인다. 이렇게 본 논문에서 소개한 리튬-이온 배터리의 전반적인 Balancing 방안은 추후 인공위성에 적용되는 리튬-이온 배터리의 운용 및 보관에 Guide Line을 제시할 것이라고 판단한다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.462-465
• /
• 2002

In this treatise, we developed a balance grinding appointment main axis of auto balancing that can control all vibrancy components and instability of cutting area, disturbance etc.. including high speed unbalance quantities more than 6,000 rpm on the basis of estimate control technology that consider grinding mechanism to purpose balancing on the of machine.

• Journal of Institute of Convergence Technology
• /
• v.4 no.2
• /
• pp.55-59
• /
• 2014

A cat is able to quickly recover balance from unstable posture. To observe the balance recovery procedure of the cat, an impulse is applied to the cat while walking on a narrow bridge. We find that it rotates its tail toward the falling direction. In our previous research, the balance recovery procedure is analyzed based on the law of the angular momentum conservation and then a key equation is derived to maintain the balance. However, it did not consider the gravity, so the performance is not good. In this paper, a new dynamic model is proposed using the Lagrangian mechanics. In the method, the gravity is included in the potential energy. Through the proposed dynamic model, controlling the balance of a walking robot is possible.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.5
• /
• pp.686-692
• /
• 1999

For the purpose of increasing compressed air pressure higher than 30bar lightening weight and decreasing installation area of air compressor used for shipboard and industrial power plant it is necessary to arrange its cylinders as a w-type or v-type construction multi-stage compression pro-cess more than two stages and to increase its operation speed higher than 1200rpm In this recip-rocating type air compressor operated in high speed having a crank mechanism and complicate cylinder arrangement there is a vibration problems which can be solved by balancing its recipro-cating parts with balance weight and approriate arranging of cylinder's arrangement angles.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.3
• /
• pp.193-204
• /
• 2006

In most existing distributed Web systems, incoming requests are distributed to servers via Domain Name System (DNS). Although such systems are simple to implement, the address caching mechanism easily results in load unbalancing among servers. Moreover, modification of the DNS is necessary to load considering the server's state. In this paper, we propose a new dynamic load balancing method using dynamic DNS update and round-robin mechanism. The proposed method performs effective load balancing without modification of the DNS. In this method, a server can dynamically be added to or removed from the DNS list according to the server's load. By removing the overloaded server from the DNS list, the response time becomes faster. For dynamic scheduling, we propose a scheduling algorithm that considers the CPU, memory, and network usage. We can select a scheduling policy based on resources usage. The proposed system can easily be managed by a GUI-based management tool. Experiments show that modules implemented in this paper have low impact on the proposed system. Furthermore, experiments show that both the response time and the file transfer rate of the proposed system are faster than those of a pure Round-Robin DNS.

• Journal of Internet Computing and Services
• /
• v.10 no.2
• /
• pp.65-73
• /
• 2009

IEEE802.11 Wireless LAN(WLAN) is being widely used in public space such as airport, and increases the networking boundary in campus and enterprise, and it has lastly attracted considerable attention for mesh network and converged network with other 3G mobile communication networks. In WLAN, load balancing among Access Points(AP) is an important issue for efficient resource management or supporting the Quality of Service(QoS) of traffic, but most researches focused on the AP selection in network entry or roaming of Stations(STA). In this paper, we propose an AP-Initiated Flow Redirection(FR) for AP load balancing by monitoring AP's availability in the true sense. When the AP's resource becomes almost saturated, that is used more than a specific threshold, the AP queries the roaming possible neighbor APs about their availability and calculates the distribution of traffic load with statistical methods such as entropy or chi-square. Finally, the AP decides flows and new APs for redirection and performs it. Our simulation results show that our FR mechanism increases the performance in the various views.

• Journal of TMJ Balancing Medicine
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2022

Objectives: For the deviation phenomenon occurring during the treatment process in temporo-mandibular balancing medicine (TBM), hypotheses were established regarding the cause and mechanism of formation from the perspective of neuro-science and material mechanics, and a verification method was proposed. Methods: The deviation phenomenon was theoretically analyzed based on the structure theories of material mechanics of the joint and the neurological pain mechanism. Results: Deviation occurs due to temporary yield by the accumulation of heterogeneous stress in the temporo-mandibular joint and the affected joint. Because the joint structures are corresponding with material mechanics showing compressive and tensile properties. The size of the deviation is expressed in terms of strain. The occlusal surface of the teeth is level with the axial joint. Since the magnitude of the deviation has a proportional relationship with the degree of abnormality of the temporo-mandibular joint, the magnitude of the deviation calculated by the balance measurement can be replaced by the strain. The major variables involved in the occurrence of deviations are the strength of joint structures and neurological conditions. Therefore plastic deformation and adaptation occur as a long-term depression of neural circuits is strengthened in different ways at different locations each time in various clinical situations. This is the reason why the sequence of the restoration process while correcting deviations is following reverse order of the accumulation in many layers in the muscular nervous system. Conclusions: From the above results, it can be inferred that the occurrence and correction of the deviations are corresponding with the plastic deformation and neuro-plasticity.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.448-457
• /
• 1996

Chemical application is one of the most important field operation in rice production . Rolling of a boom due to local unevenness and softness in fields causes a local under/over-application of spray. This study was conducted to develop a control system for balancing a boom. A boom mounting mechanism was modfied and a control algorithm was developed in the study. The results for testing the performance of the control system showed that the system could balance the boom in flat and inclined fields. This research can contribute to improve spraying uniformity in applying agricultural chemicals with a boom sprayers.

• The Journal of Information Technology and Database
• /
• v.7 no.1
• /
• pp.83-97
• /
• 2000

Internet-based retail business spreads rapidly in Korea. Companies are trying to develop and use various strategic capabilities. The strategies employed by those companies include activities related to the design of shopping sites, market positionsing, facilitation of purchasing process, payment mechanism, and the provision of various consumer services. However, the success of these strategies depends on various environmental factors and internal capability of the companies. Especially, balancing activities performed on-line with those performed off-line is suggested to be essential. In this study, we examined three successful Internet shopping mall companies and compared them to draw useful guidelines for balancing shopping mall strategies - on - line vs. off - line. These three companies were selected because they are all considered sucessful by now, but brought different backgrounds.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11a
• /
• pp.143-146
• /
• 2002

웹 서비스를 제공하는 분산 서버 시스템에서 각 서버의 부하 상태를 파악하여 처리해야 할 부하를 조절하여 주면 서버의 부하가 균등하게 되어 더 나은 성능을 얻을 수 있게 된다. 서버의 부하 상태는 시스템의 자원에 영향을 미치는 여러 가지 요소에 의하여 분석을 할 수 있다. 본 논문에서는 다양한 스트레스 테스트를 통하여 서버의 자원의 고갈을 나타내는 주요 성능 지표들을 변화 상태를 분석하였다. 고려된 성능지표로는 Available Memory 양, Page Read 수, Processor Utilization, Processor Queue Length, 네트웍으로 전달된 Transmitted Bytes, 연결된 Connection 개수이다. 실제로 이중 하나의 요소를 적용시켜서 ALBM (Adaptive Load Balancing Mechanism)을 실행을 하였을 때 일반 LVS Round Robin 보다 성능이 좋은 결과를 낳았다.