• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.421-427
• /
• 2008

In manufacturing industry, cutting parameters have an influence on reducing the production cost and time and deciding the quality of a final product However, owing to governmental regulations and the change of owner's cognizance, the machining safety becomes important in those fields relatively. The paper presents an intelligent operation planning system considering machining safety for milling operations. The main issue of the system is to determine the cutting parameters in achieving a balanced consideration of productivity and worker's safety. The detailed algorithm and functions of the developed system is introduced and then discussed.

• 전기학회논문지
• /
• 제61권3호
• /
• pp.437-441
• /
• 2012

In this paper, we have designed and manufactured 10MHz power source for the application of short distance wireless power transmission. The designed power source consists of a DDS(direct digital synthesizer) signal generator, a buffer driver and a balanced power amplifier. Short range wireless power transmission is usually carried out by near-field inductive coupling between source and load. The distance variation between source and load gives rise to the change of load impedance of power amplifier, which has effect on the operation of power amplifier. To overcome this problem due to load variation of power amplifier, we have adopted the balanced power amplifier using the quadrature hybrid implemented by lumped capacitors and a mutually coupled coil. The experiment results show the above 40dBm output power, frequency range of 9 to 11MHz, and total DC power consumption of 36W.

• 수산해양기술연구
• /
• 제51권2호
• /
• pp.245-256
• /
• 2015

This study is intended to provide navigator with specific information necessary to assist the avoidance of collision and the operation of ships to evaluate the maneuverability of dead weight tonnage 8,000 tons Oil/Chemical tanker. The actual maneuvering characteristics of ship can be adequately judged from the results of typical ship trials. Author carried out sea trials based full scale for turning test in ballast condition and full load condition, semi balanced rudder and flap rudder. The turning circle maneuvering were performed on the starboard and port sides with $35^{\circ}$ rudder angle at the normal continuous rating. The results from tests could be compared directly with the standards of maneuverability of IMO and consequently the maneuvering qualities of the ship is full satisfied with its.

• 산업경영시스템학회지
• /
• 제32권1호
• /
• pp.44-51
• /
• 2009

A bonded warehouse is the warehouse located in bonded area. It functions not only as a general warehouse but also as a place for managing the work related to import and export bonded goods. As a general warehouse, it uses the rack system to store the goods and the folk lift truck to move the unitized goods. The operation of the storing system closely related to the efficiency of space uses in a warehouse and vehicle working. Thus, vehicle performance measured in distance units in the ware-house could be used as one of the key performance measure in warehouse system. This paper focuses on the operation efficiency of the bonded warehouse which uses rack system for the storing and the folk lift truck for moving goods. The method of load allocation for balancing the rack uses and vehicle operation for maximizing efficiency are the specific concerns in this paper. The simulation study is conducted to find a policy for efficient vehicle operation based on balanced rack utilization, and the favorable result for the system operation would lead the usable proposal in vehicle operation.

• 지식경영연구
• /
• 제3권1호
• /
• pp.41-60
• /
• 2002

This paper defines measurement index items and weight of the index for the purpose of developing a performance measurement index that balancedly measures performance of B2B electronic commerce. The deductive research is used for the development of measurement index items and Analytic Hierarchy Process(AHP) method for the development of weight of the index. This paper has four performance measurement perspectives-finance, partners, business process and human resources, which based the existing researches of balanced performance measurement. This researchers developed eleven second level criteria and twenty-six indexes under four perspectives through the deductive method and expert interviews, weighted on the perspectives, criteria and indexes in accordance with the forms of e-marketplace-vertical and horizontal. As a result, the most important indexes are the maintenance of partners and the efficiency of operation process in the vertical e-marketplace. In the horizontal e-marketplace, the collection of partners, development and prediction processes are more important than other indexes.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권12호
• /
• pp.624-629
• /
• 2002

This paper presents the first Simulation model using EMTDC program to analyze the electrified train voltage distribution characteristics in ac auto-transformer 1110 railroads. In general, all of the electrified train supply system has the characteristics that the train supply line is a naturally non-symmetrical and unbalanced system. Also, it is needed to model the Scott transformer which invert the balanced 3-phase quantity into 2-phase. Therefore, the general simulation methodology using previous simplified equivalent circuit or RMS based program can't obtain the accurate results to reflect the real-time operation because these methodology is basically assumed on completely 3-phase balanced system. To overcome these defects, in this paper, the EMTDC simulation model to analysis the completely electrified railroad system with Scott transformer and AC auto-transformer is presented. Also, the correctness of EMTDC modeling is confirmed by the old basic concepts and we think that this EMTDC model has the future powerful capability for application of railroad system analysis.

• 한국정밀공학회지
• /
• 제24권7호
• /
• pp.39-48
• /
• 2007

This paper presents a method of a line balanced assembly sequence generation based on the verification of a disassemblability and a work time. To derive the disassemblability for a part to be disassembled, first we inference collision free assembly directions by extracting separable directions fur the part. And we determine the disassemblability defined by the separability and stability cost. The separability cost represents a facility of the part disassembly operation, and the stability cost which represents a degree of the stability for the base assembly motion. Based upon the results, we propose a new approach of evaluating work time using neural networks. The proposed assembly sequence generation provides an effective means of solving the line balancing problem and gives a design guidance of planning assembly lay-out in flexible manufacturing application. Example study is given to illustrate the concepts and procedure of the proposed schemes.

• 한국철도학회논문집
• /
• 제5권4호
• /
• pp.253-259
• /
• 2002

This paper presents the first simulation model using EMTDC program to analyze the electrified train voltage distribution characteristics in ac auto-transformer fed railroads. In general, all of the electrified train supply system has the characteristics that the train supply line is a naturally non-symmetrical and unbalanced system. Also, it is needed to model the Scott transformer which invert the balanced 3-phase quantity into 2-phase. Therefore, the general simulation methodology using previous simplified equivalent circuit or RMS based program can't obtain the accurate results to reflect the real-time operation because these methodology is basically assumed on completely 3-phase balanced system. To overcome these defects, in this paper, the EMTDC simulation model to analysis the completely electrified railroad system with Scott transformer and AC auto-transformer is presented. Also, the correctness of EMTDC modeling is confirmed by the old basic concepts and we think that this EMTDC model has the future powerful capability for application of railroad system analysis.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1954-1961
• /
• 2007

This project of total city plan is developed for the area of DONGDAEGU station in the field of new city-core which is adapted for a forefront city and rational restructuring of the city space and improving for balanced growth according to the first phase operation of Korean high speed line and its complete construction to BUSAN. Bring a new heart of this city of the area of DONGDAEGU station which is a gateway to DAEGU city so that the area contrives a new creation of the city space, balanced developing and activation of a region economy. Deliberate for plan of private capital for harmonious to develop a territory of station therefore it raises an emblem of DAEGU city and activates an economy of the city according to the new trend of the condition of transportation integrated administration of a large regionand new development of DONGDAEGU station.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1254-1266
• /
• 2007

This project of total city plan is developed for the area of DONGDAEGU station in the field of new city-core which is adapted for a forefront city and rational restructuring of the city space and improving for balanced growth according to the first phase operation of Korean high speed line and its complete construction to BUSAN. Bring a new heart of this city of the area of DONGDAEGU station which is a gateway to DAEGU city so that the area contrives a new creation of the city space, balanced developing and activation of a region economy. Deliberate for plan of private capital for harmonious to develop a territory of station therefore it raises an emblem of DAEGU city and activates an economy of the city according to the new trend of the condition of transportation integrated administration of a large regionand new development of DONGDAEGU station.