• Physical Therapy Korea
• /
• v.25 no.1
• /
• pp.53-61
• /
• 2018

Background: The process of language translation, adaptation, and cross-cultural validation of tools for use in multiple countries requires the adoption of well-established, comprehensive, and rigorous methodological approaches. Back translation, which is the most recommended method, permits the detection of errors in the translation and the identification of words or phrases that cannot be accurately or literally translated. Objects: The aim of this study was to verify the content validity of a Korean version of a Balance Evaluation Systems test (BESTest) by using a back-translation method. Methods: This research was conducted in six steps: 1) translation of the BESTest into Korean, 2) evaluation of the translation conformity of Korean-translated BESTest, 3) evaluation of the degree of translation comprehension, 4) back translation of Korean BESTest, 5) evaluation of the technical and conceptual equivalence, and 6) completion of the Korean version of BESTest by the translation verification committee. Results: In this study, Korean version of the BESTest achieved a rating of more than 3 (moderate) for translation comprehension, and technical equivalence and conceptual equivalence of back translation were evaluated as 3 (moderate) or more. Conclusion: The Korean version of the BESTest has proven content validity and is an appropriate tool to measure balance function.

• Journal of Biomedical Engineering Research
• /
• v.36 no.5
• /
• pp.228-234
• /
• 2015

The balance ability significantly decreased in the elderly because of deterioration of the neural musculature regulatory mechanisms. Several studies have investigated methods of improving balance ability using real-time systems, but it is limited by the expensive test equipment and specialized resources. Recently, Kinect system based on depth data has been applied to address these limitations. Little information about accuracy/inaccuracy of Kinect system is, however, available, particular in motion analysis for evaluation of effectiveness in rehabilitation training. Therefore, the aim of the current study was to evaluate accuracy/inaccuracy of Kinect system in specific rotational movement for balance rehabilitation training. Six healthy male adults with no musculoskeletal disorder were selected to participate in the experiment. Movements of the participants were induced by controlling the base plane of the balance training equipment in directions of AP (anterior-posterior), ML (medial-lateral), right and left diagonal direction. The dynamic motions of the subjects were measured using two Kinect depth sensor systems and a three-dimensional motion capture system with eight infrared cameras for comparative evaluation. The results of the error rate for hip and knee joint alteration of Kinect system comparison with infrared camera based motion capture system occurred smaller values in the ML direction (Hip joint: 10.9~57.3%, Knee joint: 26.0~74.8%). Therefore, the accuracy of Kinect system for measuring balance rehabilitation traning could improve by using adapted algorithm which is based on hip joint movement in medial-lateral direction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.11
• /
• pp.1074-1081
• /
• 2010

Today, the research related to the robot is achieved in various part. With the high interest in means of transport, various researches about autonomous mobile robot and next generation transport is continuing. The unicycle robot among these needs much control technique like balance control model and driving model. For autonomous driving of this unicycle robot, from the basic balance control to direction switching control and velocity control are needed. But the environment elements like a gradient and frictional force or unbalanced elements from the structural feature. The unicycle needs the real time balance control so more complex, harder to control. And when functional addition is made, the problem that fall entire reaction velocity or accuracy would be happen. This paper introduces entire dynamics modeling of the unicycle robot and reduced model. And propose the new balance control algorithm using fuzzy controller. Also the evaluation about performance would be made through the test.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.4
• /
• pp.12-21
• /
• 2001

Recently, as work strength is deepened, as well, labor environments is changed, simple and iterative worker's Cumulative Trauma Disorders(CTD) is gradually being increased. Accordingly, this study was designed to represent its system design to carry out their iterative and simple task by machine through the difference of muscle fatigue between worker on handling line and worker under the work environments by Air Balance System for the purpose of analyzing their muscle fatigue test according to fulfillment of iterative and simple task. From the result of this study, with regard to the comparison of muscle fatigue between work on handling line and work on automation line on the occasion of refractory brick loading, their muscle fatigue extent under the work environments by Air Balance system was lower than it of handling by AMEG(64.1%), MF(65.3%), MPF(64.3%), ZCR(63.6%) respectively. And also, generally there showed similar transfer at the aspect of muscle mobilization. In other words, we can say that work environments by Air Balance System is beneficial at the aspect of alleviating works' fatigue extent on handling line. As well, the result of this study shows that worker's exposure to Cumulative Trauma Disorders(CTD) is relatively low.

• Journal of Korean Academy of Nursing
• /
• v.38 no.1
• /
• pp.83-91
• /
• 2008

Purpose: The purpose of this study was to test the validity of a modified clinical performance examination (CPX) for preclinical students in nursing. Method: 70 nursing students in their second semester of the junior year at C University participated in CPX. Scenarios and checklists were developed by our research team from September to October 2005. Six stations were organized. Evaluation included physical examination of a patient with lung cancer, education on usage of a metered dosage inhaler, and lobectomy postoperative care. Students were randomly assigned to a station. Result: There was a difference in the CPX scores according to stations. The agreement of scoring between trained faculty members and SPs was more than moderate (r=.647). The correlation between the CPX score and the average grade in the previous semester and between the CPX score and the average grade of a paper and pen test of the pulmonary system of adults was low (r=.276; r=.048). Conclusion: Traditional CPX is generally recommended, however, modified CPX is appropriate for preclinical students in the current Korean Nursing school setting if there are additional scoring systems to balance the testing level at each station.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.200.2-200.2
• /
• 2016

Carbon-based materials have been known as ablative material and have been used for thermal protection systems. Ablation is an erosive phenomenon that results in thermochemical and thermomechanical changes on materials. Ablation resistance is one of the key properties that determines performance and life-time of the thermal protection material under ablative conditions. In this study, ablation properties of graphite, 3-dimensional (C/C) composites (needle-punched type and rod type) were investigated byusing a plasma wind tunnel which produce a supersonic plasma flow from a segmented arc heater with the power level of 0.4 MW. The mass losses and surface roughness changes which contain main result of the ablation are measured. A morphological analysis ofthe carbon-based materials, before and after the ablation test, are performed through field emission scanning electron microscopy (FE-SEM) and non-contact 3D surface measuring system. Electronic balance and a portable surface roughness tester were used for evaluation of the recession and mass loss of the test samples.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.746-758
• /
• 2006

Many objects existing on wide area environments have the replication characteristics according to how to categorize using their own names or properties. From the clients' requests, the existing naming and trading services have not supported with the binding service for replicated solver object with the same service type. For this reason, we present an integrated model that can support the selection of replicated object and dynamic binding services on wide-area computing environments. This model suggests provides not only location management of replicated objects but also active binding service which enables to select a least-loaded object on the system to keep the balance of load between systems. In this purpose, constructing both the service plan and model for support solver object's binding with replication property on wide area computing environments has been researched. In this paper, we showed the test environment and analyzed the performance evaluation of client/server binding procedures via integrated binding service in federation model and verified our model under the condition to see whether load balance can be applied to our model. For the performance evaluation of suggested wide area integrated binding service federation model, evaluated the integrated binding service of each domain and analyzed the performance evaluation of process for non-replication object's under federation model environment. Also, we analyzed the performance evaluation of the federation model between domains for wide area environment. From the execution results, we showed the federation model provides lowers search-cost on the physical tree structure of network.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.357-361
• /
• 2011

The terminal current in voltage driven systems is an essential role for characterizing the pattern of electric discharge such as corona, breakdown, etc. Until now, to evaluate this terminal current, Sato's equation has been widely used in areas of high voltage and plasma discharge. Basically Sato's equation was derived by using the energy balance equation and its final form described physical meaning explicitly. To give more general abilities in Sato's equation, we present a generalized approach by directly using the Poynting's theorem incorporating the finite element method. When the magnetic field effect or the time-dependent voltage source is considered, this generalized energy method can be easily applicable to those problems with any dielectric media such as gas, fluid, and solid. As an alternative approach, the integral Ohm's law resulting in small numerical errors has an ability to be applied to multi-port systems. To test the generalized energy method and integral Ohm's law, first, the results from two prosed methods were compared to those from Sato's approach and an analytic solution in parallel plane electrodes. After verification, the generalized method was applied to the tip-sphere electrodes for evaluating the terminal current with three carriers and the Fowler-Nordheim field emission condition. From these results, we concluded that the generalized energy method can be a consistent technique for evaluating the discharge current with various dielectric materials or large magnetic field.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.654-670
• /
• 2020

Workers at construction sites are easily exposed to many dangers and accidents involving falls, tripping, and missteps on stairs. However, researches on construction site monitoring system to prevent work-related injuries are still insufficient. The purpose of this study was to develop a wearable textile pressure insole sensor and examine its effectiveness in managing the real-time safety of construction workers. The sensor was designed based on the principles of parallel capacitance measurement using conductive textile and the monitoring system was developed by C# language. Three separate experiments were carried out for performance evaluation of the proposed sensor: (1) varying the distance between two capacitance plates to examine changes in capacitance charges, (2) repeatedly applying 1 N of pressure for 5,000 times to evaluate consistency, and (3) gradually increasing force by 1 N (from 1 N to 46 N) to test the linearity of the sensor value. Five subjects participated in our pilot test, which examined whether ascending and descending the stairs can be distinguished by our sensor and by weka assessment tool using k-NN algorithm. The 10-fold cross-validation method was used for analysis and the results of accuracy in identifying stair ascending and descending were 87.2% and 90.9%, respectively. By applying our sensor, the type of activity, weight-shifting patterns for balance control, and plantar pressure distribution for postural changes of the construction workers can be detected. The results of this study can be the basis for future sensor-based monitoring device development studies and fall prediction researches for construction workers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.10
• /
• pp.1474-1483
• /
• 2013

The objective was to evaluate the use of prediction equations based on the chemical composition of feedstuffs to estimate the values of apparent metabolisable energy corrected for nitrogen balance (AMEn) of corn and soybean meal for broilers. For performance and carcass characteristics, 1,200 one-d-old birds (male and female) were allotted to a completely randomised factorial $2{\times}8$ (two genders and eight experimental diets) with three replicates of each sex with 25 birds. In the metabolism trial, 240 eight-d-old birds were distributed in the same design, but with a split plot in time (age of evaluation) with five, four and three birds per plot, respectively, in stages 8 to 21, 22 to 35, and 36 to 42 d of age. The treatments consisted of the use of six equations systems to predict the AMEn content of feedstuffs, tables of food composition and AMEn values obtained by in vivo assay, totalling eight treatments. Means were compared by Scott-Knott test at 5% probability and a confidence interval of 95% was used to check the fit of the energy values of the diets to the requirements of the birds. As a result of this study, the use of prediction equations resulted in better adjustment to the broiler requirements, resulting in better performance and carcass characteristics compared to the use of tables, however, the use of energy values of feedstuffs obtained by in vivo assay is still the most effective. The best equations were: AMEn = 4,021.8-227.55 Ash (for corn) combined with AMEn = -822.33+69.54 CP-45.26 ADF+90.81 EE (for soybean meal); AMEn = 36.21 CP+85.44 EE+37.26 NFE (nitrogen-free extract) (for corn) combined with AMEn = 37.5 CP+46.39 EE+14.9 NFE (for soybean); and AMEn = 4,164.187+51.006 EE-197.663 Ash-35.689 CF-20.593 NDF (for corn and soybean meal).