• 한국자기학회지
• /
• 제5권4호
• /
• pp.275-280
• /
• 1995

Ba-Ferrite의 높은 보자력을 제어할 목적으로 $Fe^{+3}$의 일부를 2가 이온과 4가 혹은 5가 이온인 dopants로 치환할때 치환이온의 종류와 그 치환량에 따라 자기적 물성 과 입자특성은 매우 다르게 나타난다. $co^{+2}$의 치환은 magneto-plumbite 구조중 R-block내 치환과 과잉의 S-block 생 성을 촉진시켜 Ba-ferrite의 높은 보자력을 효과적으로 감소시키고 더 높은 포화자화 값을 나타내지만, 입자크기 및 그 분포 뿐만아니라 보자력의 분포도도 불균일하게 만드는 단점이 있다. $Ti^{+4}$의 치환은 포화자화값을 감소시키지만 보자력의 감소에도 상당한 영향을 미치고 있다. 또한 $Ti^{+4}$는 비정질체내에서 핵생성 촉진제로서 입자크기 및 판상비를 효과적으로 감소시키며, $Co^{+2}$에 의한 과잉의 S-block의 생성량을 줄여 자기적 물성을 균일하게 하는 작용을 하고 있다. 따라서 2가 이온과 4가 이온의 치환량 결정은 더 높은 포화자화값을 얻기 위해서 과잉의 2가 이온을 사용한다거나 원자가 보상을 위해 동등량으로 치환하기보다는 자기적 물성과 입자특성을 고려하여 최적화되어야 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.206-210
• /
• 2004

This paper proposes a new training system for equilibrium sense using unstable platform. This training system for equilibrium sense consists of an unstable platform, a computer interface circuit and software program. Postural instability changes the weighting of different types of sensory information and the state of the equilibrium maintenance system. In order to improve the equilibrium sense, we developed software program such as a block game, sine curve training (SCT) and pingpong game using Visual C++. Using this system and training programs, we performed an experiment to train the equilibrium sense of a subject. To evaluate the effects of balance training, the time maintained on the target and the moving time to the target are measured. As a result, the moving time to the target and time to maintain cursor on the target improved through repeating equilibrium sense training. It was concluded that this system was reliable in the evaluation of equilibrium sense. We expect that this system might be applied to clinical use as an effective balance training system.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.945-956
• /
• 1999

This work reports a set of approximate analytical solutions describing the initial transient process of close-contact melting between a rectangular parallelepiped solid and a flat plate on which either constant temperature or constant heat flux is imposed. Not only relative motion of the solid block tangential to the heating plate, but also the density difference between the solid and liquid phase is incorporated in the model. The thin film approximation reduces the force balance between the solid weight and liquid pressure, and the energy balance at the melting front into a simultaneous ordinary differential equation system. The normalized model equations admit compactly expressed analytical solutions which include the already approved two-dimensional solutions as a subset. In particular, the normalized liquid film thickness is independent of all pertinent parameters, thereby facilitating to define the transition period of close-contact melting. A unique behavior of the solid descending velocity due to the density difference is also resolved by the present solution. A new geometric function which alone represents the three-dimensional effect is introduced, and its properties are clarified. One of the representative results is that heat transfer is at least enhanced at the expense of the increase in friction as the cross-sectional shape deviates from the square under the same contact area.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.192-198
• /
• 2005

In this paper, we propose a new training system for the improvement of equilibrium sense using unstable platform. The equilibrium sense, which provides orientation with respect to gravity, is important to integrate the vision, somatosensory and vestibular function to maintain the equilibrium sense of the human body. In order to improve the equilibrium sense, we developed the software program such as a block game, pingpong game using Visual C++. These training system for the equilibrium sense consists of unstable platform, computer interface and software program. The unstable platform was a simple structure of elliptical-type which included tilt sensor, wireless RF module and the device of power supply. To evaluate the effect of balance training, we measured and evaluated the parameters as the moving time to the target, duration to maintain cursor in the target of screen and the error between sine curve and acquired data. As a results, the moving time to the target and duration to maintain cursor in the target was improved through the repeating training of equilibrium sense. It was concluded that this system was reliable in the evaluation of equilibrium sense. This system might be applied to clinical use as an effective balance training system.

• 소음진동
• /
• 제9권1호
• /
• pp.184-188
• /
• 1999

Noise regulation of heavy construction machinery is getting stricter： 3 dB per every 4 year in European community. To meet this requirement many engineers have adopted the enclosing structures with thick absorbing materials and small opening, This increases internal temperature of the enclosure which have engine systems such as electric equipment that are vulnerable to heat, and engine block and muffler that can be regarded as heat sources. So noise control engineers have to consider a coupling problem: combining heat balance and noise reduction. This paper describes this approach by introducing simple heat transfer theory and SEA. The enclosing system of the loader whose enclosing structure consists of two rooms is investigated to show the validity of this method. The results represent that the simple heat transfer theory can be useful to estimate cooling performance when it is linked together by the back pressure theory in duct system. and the radiated noise can also be estimated by the SEA. Therefore a designer can use these approaches to define the opening ratio of an enclosure and the mass flow rate of air considering radiating noise.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권12호
• /
• pp.1858-1864
• /
• 2007

Influence of varying level of sodium bicarbonate (SB) supplementation on milk yield and its composition was examined in a randomized complete block design in early lactating Nili Ravi buffaloes during summer. Four iso-nitrogenous and iso-caloric diets were formulated. The diet 0B contained 0 while LB, MB and HB diets contained 0.50, 1.0 and 1.50% SB levels, respectively. The diets were randomly allotted to twenty buffaloes, five in each group. A linear increase in nutrient and water intake was recorded with increasing SB level. Buffaloes fed MB and HB diets showed higher nitrogen balance than those fed 0B and LB diets. A significant increase in blood pH and serum bicarbonate was noticed with increasing SB level. Urine pH increased significantly with increased SB level. A linear increase in milk yield was also noticed with increasing SB level. Milk fat% increased significantly in buffaloes fed MB and HB diets compared with those fed 0B and LB diets. Buffaloes fed HB diet had higher conception rate and less services per conception than those fed 0B diet. This study indicated that a high SB diet not only increased dry matter and water intake, milk yield, milk fat% but also increased conception rate in early lactating buffaloes during summer.

• Bulletin of the Korean Chemical Society
• /
• 제24권3호
• /
• pp.325-333
• /
• 2003

An analysis of the electronic structure and bonding in the ternary silicide YNiSi₃is made, using extended Huckel tight-binding calculations. The YNiSi₃structure consists of Ni-capped Si₂dimer layers and Si zigzag chains. Significant bonding interactions are present between the silicon atoms in the structure. The oxidation state formalism of $(Y^{3+})(Ni^0)(Si^3)^{3-}$ for YNiSi₃constitutes a good starting point to describe its electronic structure. Si atoms receive electrons from the most electropositive Y in YNiSi₃, and Ni 3d and Si 3p states dominate below the Fermi level. There is an interesting electron balance between the two Si and Ni sublattices. Since the ${\pi}^*$ orbitals in the Si chain and the Ni d and s block levels are almost completely occupied, the charge balance for YNiSi₃can be rewritten as $(Y^{3+})(Ni^{2-})(Si^{2-})(Si-Si)^+$, making the Si₂layers oxidized. These results suggest that the Si zigzag chain contains single bonds and the Si₂double layer possesses single bonds within a dimer with a partial double bond character. Strong Si-Si and Ni-Si bonding interactions are important for giving stability to the structure, while essentially no metal-metal bonding exists at all. The 2D metallic behavior of this compound is due to the Si-Si interaction leading to dispersion of the several Si₂π bands crossing the Fermi level in the plane perpendicular to the crystallographic b axis.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제8권1호
• /
• pp.14-28
• /
• 2000

The frequency response characteristics of a condenser were numerically studied for the control of refrigeration and air conditioning systems. The important parameters, such as the refrigerant flow rate, refrigerant temperature, air velocity, and air temperature at the condenser inlet, were analyzed. Superheated vapor, two phase, and subcooled liquid domain in condenser can be described by using the energy balance equation and the mass balance equation in refrigerant and tube wall, the basic equation for describing the dynamic characteristics of condenser can be derived. The transfer function for describing dynamic response of the condenser to disturbances can be obtained from using linearizations and Laplace transformations of the equation. From this transfer function, analytical investigation which affects the frequency responses of condenser has been made. Block diagrams were made based on the analytic transfer function; dynamic responses were evaluated in Bode diagrams on the frequency response. Through this study, it became possible that the information about the dynamic characteristics of air-cooled condenser is offered. The results may be used for determining the optimum design parameters in actual components and entire systems. Also, the mathematical models, frequency response may be used to help understanding, evaluate optimum design parameters, design control systems and determine on setting the best controller for the refrigeration and air-conditioning systems.

• 한국태양에너지학회 논문집
• /
• 제30권3호
• /
• pp.71-80
• /
• 2010

This study carried out to understand the thermal characteristics of various surface material which compose the city through the observation in the summer. To examine passive cooling effect of planting of building, it is arranged four different materials that is natural grass, grass block, concrete slab and artificial grass. The results of this study are as follows; (1) Natural grass and grass block show the lower surface temperature because of the structures of leaf can do more thermal dissipation effectively. (2) There is little surface temperature between artificial grass and concrete. But there is little high surface temperature difference between natural grass and concrete because of latent heat effect. (3) The concrete can play a role of the tropical nights phenomenon as high heat capacity of concrete compare with other materials. (4) It is nearly same color in artificial grass and natural grass but there is large difference between natural grass and artificial grass at albedo. There is different albedo in near infrared ray range. (5) A short wave radiation gives more effect at the globe temperature than long wave radiation. (6) The artificial turf protected the slab surface temperature increase in spite of thin and low albedo materials.

• 산업공학
• /
• 제12권3호
• /
• pp.395-400
• /
• 1999

Shipbuilding process is composed of hull construction, in which the structural body of a ship is formed, and outfitting, in which all the non-structural parts such as pipes, derricks, engines, machinery, electrical cable, etc. are manufactured, added and assembled. Hull construction can be classified into parts fabrication, block assembly and hull erection. Among them, the parts fabrication is the first manufacturing stage that produces components or zones needed for block assembly and hull construction. More specifically, the parts fabrication is performed through machining processes including marking, cutting, pressing, and/or forming. When material is entering into the parts fabrication stage, it is important for achieving the total efficiency of production to select one of production division, so-called 'bay,' as well as machine tools on which the part is fabricated. In this paper, given production quantities of parts in the fabrication stage, the problem is to optimally select machine tools and production division, such that the total flow-time is minimized as well as the workload among machines is balanced. Specifically, three mathematical models for flow-time minimization, load balance, and simultaneously considering both objectives, and a numerical example are analyzed and presented.