• Journal of Korean Society of Environmental Engineers
• /
• 제37권12호
• /
• pp.689-695
• /
• 2015

A biofilm filtration for the removal of gaseous pollutants has been recognized as a process with a complex interaction between the gas flow characteristics and the process operating variables. This study aims to develop an one dimensional dynamic numerical model which can be utilized as a tool for the analysis of biofilm filtration process operated in plug flow mode. Since, in a plug flow system, minor environmental changes in a gaseous unit process cause a drastic change in reaction and the interaction between the pollutants is an influencing factor, plug flow system was generalized in developing the model. For facilitation of the model development, dispersion was simplified based on the principles of material balance. Several reactions such as competition, escalation, and control between the pollutants were included in the model. The applicability of the developed model was evaluated by taking the calibration and verification steps on the experimental data performed for the removal of BTX at both low and high flow concentration. The model demonstrated a correlation coefficient ($R^2$) greater than 0.79 under all the experimental conditions except for the case of toluene at high flow condition, which suggested that this model could be used for the generalized gaseous biofilm plug flow filtration system. In addition, this model could be a useful tool in analyzing the design parameters and evaluating process efficiency of the experiments with substantial amount of complexity and diversity.

• Applied Biological Chemistry
• /
• 제31권3호
• /
• pp.226-233
• /
• 1988

Some physico-chemical properties and biological activities of new fungicide formulations were tested to investigate a feasibility of water-floating formulation development for sheath blight control in rice. Pencycuron[1-(4-chlorobenzyl)-1-cyclopentyl-3-phenylurea] and flutolanil$({\alpha},{\alpha},{\alpha}$-trifluoro-3'-isopropoxy-O-toluanilide) were chosen as toxicants for the formulations. Vegetable oil and surface active agents were used as a floating agent and spreader, respectively. All the formulations tested showed an excellent spreadability on the water having over $35cm^2/mg$ and were chemically stable, which the degradation rates of active ingredients were less than 10% after 12 weeks of storage at $50^{\circ}C$. Most of the applied test formulation of pencycuron was retained within 0.5cm of the surface paddy water, while that of flutolanil was vertically dispersed in the water. Inhibition activity of the tested pencycuron formulation on the sclerotia germination of the pathogen in paddy water was maintained over 30 days after the formulation treatment. Control effect of 4% pencycuron water-floating formulated with surface active agent of hydro-lipophyllic balance 4.3 on the disease in rice was equal to the reference fungicide(pencycuron 25% WP) when the former was treated one day before the transplantation of rice seedlings. Overflowing the submerged paddy water after the formulation treatment resulted in a deterious effect on the disease control.

• Korean Journal of Agricultural and Forest Meteorology
• /
• 제9권1호
• /
• pp.49-54
• /
• 2007

The issue of acid precipitation and related environmental problems in East Asia has been emerging. To evaluate the acidity and chemical characteristics of rainwater in Korea, its chemical properties during cultivation season from April to October in 2005 were investigated at Taean. Also, to estimate the contribution of ions on acidity, ion composition characteristics and neutralization effects by cations were determined. The electrical conductivity balance between measured and estimated values showed a high correlation. Rainwater was highly distributed in the range of pH $4.5{\sim}5.0$. The acidity of rainwater was relatively low during the month of June compared with other monitored periods. $Na^+$ was the main cation, followed by $H^+>Ca^{2+}>NH_4^+>K^+>Mg^{2+}$. Among these ions, $Na^+,\;NH_4^+,\;Ca^{2+}$ and $H^+$ comprised over 94% of the total cations. Rainwater anion composition was more than 80% with $SO_4^{2-}$ and $NO_3^-$. In rainwater samples, $NH_4^+$ and $Ca^{2+}$ contributed greatly to neutralizing the rain acidity. The sulfate content decreased until September, and sea salt derivatives were higher in May and October than during other monitored periods. Also, 78% of the soluble sulfate in rainwater was nss-$SO_4^{2-}$ (non-sea salt sulfate).

• Journal of Wetlands Research
• /
• 제13권2호
• /
• pp.171-179
• /
• 2011

The main objective of this study is to estimate of the vegetation response induced by climate change to soil moisture. We investigated a relationship between vegetation activity and climate variables using Moderate Resolution Imaging Spectroradiometer (MODIS)-retrieved Normalized Difference Vegetation Index (NDVI) and soil moisture. NDVI which extracted from MODIS 13 Vegetation Indices Product was considered as an useful parameter to figure out a relationship with two types of soil moisture, which were observed at Rural Development Administration sites and estimated from Advanced Microwave Scanning Radiometer E (AMSR-E) satellite imagery. The correlation of MODIS-NDVI and ground measured soil moisture were observed, became much stronger when compared to soil moisture values with time lag (5days, 10days, 15days). The correlation patterns between NDVI and soil moisture with different time lag were related to soil texture. The results from this study will be useful to understand the role of vegetation in water balance control in various scales from regional to global climate change.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제29권5호
• /
• pp.260-268
• /
• 2017

In this study, wind characteristics of a shipping container were investigated through the wind tunnel test (high-frequency force balance test), and damage occurrence velocities of various containers with weights were evaluated based on results of the wind tunnel tests. As a result, mean wind force coefficients acting on containers in x-direction increased in the order of 12ft, 20ft, 40ft and 40ft high cube. On the other hand, mean wind force coefficients at y-direction increased in the order of 40ft high cube, 40ft, 20ft and 12ft. It was suggested that the shear layer separated from the corner of windward surface of the container is reattached on the sides of it, and then the mean wind force coefficient is weaker. As a result of the damage occurrence velocity on containers with weights, it was found that the probability of occurrence of sliding is higher rather than that of overturning. Further, the most unfavorable container was 40ft high cube, and the sliding and overturning occurrence velocities were 20.4 m/s and 26.8 m/s, respectively. Furthermore, the regression formula for sliding and overturing occurrence velocitys were proposed based on the results of relationship between weights of containers and damage occurrence velocities. These results are expected to be useful in establishing a guideline for external force estimation acting on container securing equipment and stacking way.

• Analytical Science and Technology
• /
• 제30권5호
• /
• pp.287-294
• /
• 2017

As the demand for natural gas increases with industrial development, the supply of natural gas is expected to become unstable with a shortage of imported natural gas. It is hence necessary to meet this demand by introducing and developing various types of natural gas, such as pipeline natural gas (PNG) and substituted natural gas (SNG), in addition to liquefied natural gas (LNG). The components included in PNG as well as their concentrations must be measured accurately, and a standard gas should be developed to accurately measure hydrocarbons ($C_6-C_{10}$), which are trace components included in natural gas. The components in the primary standard gas mixtures (PSMs) developed in the present study were hexane, heptane, octane, nonane, and decane with concentrations of $10-30{\mu}mol/mol$ with methane as the balance gas. Standard hydrocarbon ($C_6-C_{10}$) gas mixtures were prepared in aluminum cylinders by a gravimetric method with traceability following ISO 6142 with raw material gases, for which the purity of each component was analyzed completely. The prepared standard gas mixtures were analyzed by to evaluate the preparation consistency between the standard gas mixtures, the adsorbability of the cylinders, the variation of the stability, and the uncertainty. The results showed that aluminum cylinders have little adsorptive loss on their internal surfaces with excellent long-term stability. The developed standard gas mixture, containing hexane, heptane, octane, nonane, and decane with concentrations of $10-30{\mu}mol/mol$, showed an uncertainty in a range of 0.79 % - 1.63 %.

• Journal of Educational Research in Mathematics
• /
• 제9권1호
• /
• pp.81-109
• /
• 1999

This study aims to reflect the basic principles and teaching-teaming principles of Realistic Mathematics Education in order to suppose an way in which mathematics as an activity is carried out in primary school. The development of what is known as RME started almost thirty years ago. It is founded by Freudenthal and his colleagues at the former IOWO. Freudenthal stressed the idea of matheamatics as a human activity. According to him, the key principles of RME are as follows: guided reinvention and progressive mathematisation, level theory, and didactical phenomenology. This means that children have guided opportunities to reinvent mathematics by doing it and so the focal point should not be on mathematics as a closed system but on the process of mathematisation. There are different levels in learning process. One should let children make the transition from one level to the next level in the progress of mathematisation in realistic contexts. Here, contexts means that domain of reality, which in some particular learning process is disclosed to the learner in order to be mathematised. And the word of 'realistic' is related not just with the real world, but is related to the emphasis that RME puts on offering the students problem situations which they can imagine. Under the background of these principles, RME supposes the following five instruction principles: phenomenological exploration, bridging by vertical instruments, pupils' own constructions and productions, interactivity, and interwining of learning strands. In order to reflect how to realize these principles in practice, the teaming process of algorithms is illustrated. In this process, children follow a learning route that takes its inspiration from the history of mathematics or from their own informal knowledge and strategies. Considering long division, the first levee is associated with real-life activities such as sharing sweets among children. Here, children use their own strategies to solve context problems. The second level is entered when the same sweet problems is presented and a model of the situation is created. Then it is focused on finding shortcomings. Finally, the schema of division becomes a subject of investigation. Comparing realistic mathematics education with constructivistic mathematics education, there interaction, reflective thinking, conflict situation are many similarities but there are alsodifferences. They share the characteristics such as mathematics as a human activity, active learner, etc. But in RME, it is focused on the delicate balance between the spontaneity of children and the authority of teachers, and the development of long-term loaming process which is structured but flexible. In this respect two forms of mathematics education are different. Here, we learn how to develop mathematics curriculum that respects the theory of children on reality and at the same time the theory of mathematics experts. In order to connect the informal mathematics of children and formal mathematics, we need more teachers as researchers and more researchers as observers who try to find the mathematical informal notions of children and anticipate routes of children's learning through thought-experiment continuously.

• Journal of Life Science
• /
• 제27권10호
• /
• pp.1225-1231
• /
• 2017

Disruptive expression patterns of the circadian clock genes are highly associated with many human diseases, including cancer. Cell cycle and proliferation is linked to a circadian rhythm; therefore, abnormal clock gene expression could result in tumorigenesis and malignant development. The molecular network of the circadian clock is based on transcriptional and translational feedback loops orchestrated by a variety of clock activators and clock repressors. The expression of 10~15% of the genome is controlled by the overall balance of circadian oscillation. Among the many clock genes, Period 1 (Per1) and Period 2 (Per2) are clock repressor genes that play an important role in the regulation of normal physiological rhythms. It has been reported that PER1 and PER2 are involved in the expression of cell cycle regulators including cyclins, cyclin-dependent kinases (CDKs), and CDK inhibitors. In addition, correlation of the down-regulation of PER1 and PER2 with development of many cancer types has been revealed. In this review, we focused on the molecular function of PER1 and PER2 in the circadian clock network and the transcriptional and translational targets of PER1 and PER2 involved in cell cycle and tumorigenesis. Moreover, we provide information suggesting that PER1 and PER2 could be promising therapeutic targets for cancer therapies and serve as potential prognostic markers for certain types of human cancers.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제18권4호
• /
• pp.1-9
• /
• 2014

With the development of quantum computer, the development of the quantum-inspired search method applying the features of quantum mechanics and its application to engineering problems have emerged as one of the most interesting research topics. This algorithm stores information by using quantum-bit superposed basically by zero and one and approaches optional values through the quantum-gate operation. In this process, it can easily keep the balance between the two features of exploration and exploitation, and continually accumulates evolutionary information. This makes it differentiated from the existing search methods and estimated as a new algorithm as well. Thus, this study is to suggest a new minimum weight design technique by applying quantum-inspired search method into structural optimization of planar truss. In its mathematical model for optimum design, cost function is minimum weight and constraint function consists of the displacement and stress. To trace the accumulative process and gathering process of evolutionary information, the examples of 10-bar planar truss and 17-bar planar truss are chosen as the numerical examples, and their results are analyzed. The result of the structural optimized design in the numerical examples shows it has better result in minimum weight design, compared to those of the other existing search methods. It is also observed that more accurate optional values can be acquired as the result by accumulating evolutionary information. Besides, terminal condition is easily caught by representing Quantum-bit in probability.

• Journal of Korean Home Economics Education Association
• /
• 제15권2호
• /
• pp.79-99
• /
• 2003

This study is designed to identify the goals of home economics education. starting from the needs for basic research to establish a theoretical framework in home economics and for the development of basic logics to strengthen the position of home economics education as a prerequisite course in a national curriculum. To this end. this article thoroughly studied curriculum documents prepared at the national level and curriculum papers reflecting research trends of home economics education. using the results as data to identify the theoretical goals of home economics education. The research results are as follows : First, home economics education should help students become independent members of society. on the basis of daily lives. Second, with respect to personal capability development. home economics education should help to identify and solve various life-related problems in a practical problem solving. Practical members of society should be able to maintain balance in family, job, and personal career, solving the aforementioned problems in a practical way. Third, home economics education should make contributions to promoting a creative family culture in which life styles tailored for personal needs are created (education for creative members of society). The theoretical results of the study should be verified in a critical manner, followed by quantitative research that will lead to agreement among experts as to the theoretical goals.