• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.676-685
• /
• 2015

This study tried to develop Siraegi by boiling it down in soy seasoning sauce with excellent sensory attributes and evaluate the quality characteristics in order to enhance the value of traditional agricultural products, dried radish leaves. Sugar content of the seasoning sauce were finally established at 30% (w/v) compared with the starch syrup, which was added to the sauce through sensory evaluation among four groups, 0%, 30%, 60% and 100%. The texture (breaking strength) of Siraegi which was boiled for 30 minutes in water with baking powder was reduced by showing softening effect ranging from 7.6% to 42.1% as the amount of added baking powder was increased. The color of braised Siraegi produced with prepared a seasoning sauce and different content of baking powder, the brightness significantly decreased with an increase of baking powder. The reduction effects of breaking strength ranged from 25.6% to 43.9%, resulting a significant difference. The pH of braised Siraegi with a seasoning sauce significantly increased from 5.71 to 6.04 as the amount of added baking powder was increased, while its acidity was decreased. Sensory evaluation showed significant values for hardness and toughness as the values dropped when compared with the control (p<0.001), and overall acceptability of the group with adding 0.2% baking powder was best (p<0.001). In conclusion, baking powder could be considered as softening agent shorting the cooking time and improvement of the acceptability. Furthermore, it was expected that the newly developed soy sauce barised Siraegi using the dried radish leaves would be successfully utilized by side dishes in the food preparation industry.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.3
• /
• pp.287-294
• /
• 1997

When bread making, the condition of thawing-fermentation for frozen dough were tested in variable temperature, and measured thawing-fermentation time and volume of frozen dough. L-Ascorbic acid (L-Aa) was added in frozen dough for the comparison test of develop volume in bread staling degree of baking bread were measured additive frozen dough which was stoppages in freezing, staling degrees were tested hardness with Rheometer. The test for comparison of thawing-fermentation time in variable temperature was shown the condition of dough conditioner at 3$0^{\circ}C$ was most effective for bread making, Because That condition was required very short time(74 min) But, in this comparison of volume in final products was shown the products in the condition of thawing-fermentation at 3$0^{\circ}C$ was smaller than the products at 5$^{\circ}C$(418 ml). The baking volume of L-Aa additive frozen dough which has under gone thawing-fermentation at 3$0^{\circ}C$, were shown baking volume of 420 ml in 2 weeks storage terms to 100 mg/kg L-Aa additive dough and shown baking volume of 454 ml in 4 weeks storage terms to dough of 200 mg/kg additive weight. Staling degrees of L-Aa additive frozen bread were measured with Rheometer. The hardness of 100 mg/kg L-Aa additive frozen bread was sown low level hardness in 1~2 weeks freezing term, 150 mg/kg L-Aa additive frozen bread was shown low level hardness in 3 weeks freezing term. In 4 weeks freezing term, 200 mg/kg L-Aa additive frozen bread was shown low level hardness compared with non-additive L-Aa frozen bread. In comparison of frozen bread quality, non-additive L-Aa products was better than additive L-Aa products in equality of baking shape and external apparence. But in total quality in external and internal apparence, additive L-Aa products was better than non-additive L-Aa products.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.635-640
• /
• 2005

In this paper, we have improved a novel high tilted optically compensated bend (OCB) (HTOCB) mode by using high tilt angle that was generated by the unique baking condition on the homeotropic alignment layer. The high tilt angle of liquid crystal (LC) was generated by new alignment process that tilt angle changed homeotropic state to homeogenous state using Hot-plate equipment; we obtained about $40\~50^{\circ}$ tilt angle with negative and positive dielectric anisotropy on the homeotropic polyimide (PI), and then LC tilt angle decreased as increasing baking temperature and time. At last, we obtained about $10^{\circ}$ with positive type NLC $({\Delta}n>0)$. Also, the LC tilt angle of positive type NLC $({\Delta}n>0)$ decreased as increasing rubbing strength at the same baking temperature and time. The novel LC operating mode (HTOCB) that used the high tilt angle by the new alignment method was improved. The response time of the novel HTOCB cell was faster than that of conventional OCB cell. We suggest that the developed the novel HTOCB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of a fast response time and a high contrast ratio.

• Journal of the East Asian Society of Dietary Life
• /
• v.16 no.5
• /
• pp.573-577
• /
• 2006

The rutin content of Fagopyrum tataricum is 100-fold higher than that of Fagopyrum esculentum. For the development of a rutin-containing beverage, a suitable method to extract rutin from buckwheat (Fagopyrum tataricum) with high rutin yield was investigated. A roasting temperature range of $310/240^{\circ}C$ (Ed-confirm that this is indeed a range; otherwise perhaps, 'Roasting temperatures ranging from 310 to $240^{\circ}C$ were considered$\ldots$') was considered to be the best as the basic color reference. Rutin content varied according to the roasting time and heating temperature; i.e., it decreased with increasing roasting time and temperature. (Ed- this sentence is unnecessarily complicated and should be simplified to 'Rutin content decreased with increasing roasting time and heating temperature.') The optimal extraction temperature and processing time were obtained as $80^{\circ}C$ and 10 minutes to maximize the rutin concentration in the extract.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.5
• /
• pp.604-612
• /
• 2012

The quality characteristics of yackwa made with goami powder at different baking temperatures (150, 160, 170, 180) and baking times (15, 20, 25 min) and at different dipping temperatures (65 and $80^{\circ}C$) and dipping times (15 and 30 min) were evaluated. To determine the optimal temperature and time for yackwa containing goami powder, color values, preference color and pictures were determind. The baking temperatures were $150^{\circ}C$ for 25 min, $160^{\circ}C$ for 15 min and 20 min, and $170^{\circ}C$ for 15 min. The weight of yackwa was heavier at low dipping temperatures and long dipping times. L-values and b-values were the highest at short dipping times. Hardness, moisture and overall preference was the lowest at low dipping temperatures and long dipping times.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.41-44
• /
• 2007

Recently, the strenuous industrial waste is scattered and one of the oyster also make the serious environmental contamination. The purpose of this study is investigating an utilization ability as calcium binder of the oyster with Hwang-To according to a rate(10%, 20%, 30%, 40%, 50%). This study grasp physical properties of the oyster powder, bake production of the paste, and conduct the flow test, stiff time test and strength test. According to baking condition, strength of $1000^{\circ}C$(120minutes, rate 30%) is higher than any other condition. The oyster powder from above $900^{\circ}C$ seem possibility as binder hereafter. It is thought that the continuous research will be necessary.

• Food Science of Animal Resources
• /
• v.36 no.2
• /
• pp.178-185
• /
• 2016

The influence of three cooking methods (stewing, microwaving and Aluminium (Al) foil-baking) was evaluated on the content of intramuscular lipid and the composition of intramuscular fatty acids of Hyla rabbit. The percentage of intramuscular lipid in cooked-longissimus dorsi (LD) (dry weight %) were in the order mentioned below: microwaving > foil-baking > stewing. All treated samples showed decrease in the proportion of polyunsaturated fatty acids (PUFA) and monounsaturated fatty acids (MUFA), whilst increase in the proportion of saturated (SFA) and n-6/n-3 value during processing. All of the cooked samples had the n-6/n-3 ratio within the recommended range (5-10). By the analysis of partial least squares regression (PLSR), the microwaving treatment was better to keep the stability of unsaturated fatty acids (UFA), whilst the long-time Al foil-baking did the most serious damage to UFA, especially the PUFA. In addition, the heating method showed greater influence on the samples than the processing time. The shorter processing time was better to retain the intramuscular PUFA of Hyla rabbit, especially the LC-PUFAs (C20-22). Considering all the factors, microwaving showed the superiority in reserving the composition of intramuscular fatty acids of Hyla rabbit.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.119-136
• /
• 1993

Optimum hypering conditions are found for IIIa-J, IIIa-F, 103a-O, 103a-D, and IIa-O plates using hypersensitization machine in KAO. For every experimental plate we get speed gain, fog increment, signal to noise ratio and relative DQE according to hypering time and temperature. The hypersensitization method is baking with 8% hydrogen mixed gas. For IIIa-J, 103a-O, and 103a-D plates treated $65^{\circ}C$, 3 hours baking, the speed gains arc increased by about 10 times, 2 times, and 2 times compared to untreated plates, respectively. The fogs are increased by 0.08, 0.10, and 0.08, respectively. For IIIa-F, IIa-O plates treated $65^{\circ}C$, 2 hours baking, the speed gains are increased by about 4.7 times and 1.8 times compared to untreated plates, respectively. The fogs are increased by 0.15 and 0.04, respectively.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.6
• /
• pp.681-691
• /
• 2020

This study was conducted to evaluate the characteristics of bread and the rheology of flour dough containing chlorella powder(0%, 0.5%, 1.0%, 1.5%, 2.0% and 2.5%). In the farinograph test, the addition of chlorella powder changed water absorption, development time and mixing tolerance index for making bread. As the amount of chlorella powder increased, the water absorption increased, mixing tolerance index and the development time decreased. In the extensograph test, the degree of extension and resistance was decreased with increasing of chlorella powder content. In the amylograph test, the maximum viscosity was slightly decreased with increasing of chlorella powder contents. The colors of L value in bread crumb was significantly decreased as the chlorella powder addition. After fermentation treatment, The dough with 2.5% chlorella powder showed the lowest dough raising power compared to the other doughs. The addition of the chlorella powder had significant effect on bread texture. The bread consisting of 0.5% chlorella powder showed the highest volume of loaf and specific volume. Therefore, high quality of bread can be achieved by adding chlorella powder.

• Textile Coloration and Finishing
• /
• v.11 no.1
• /
• pp.16-24
• /
• 1999

The effects of two-step fixation of steaming and baking on the dischargeability of cotton fabrics dyed with C.I. Reactive Black 5(Bl-5) were investigated when the concentrations of $K_2CO_3$ and benzaldehyde sodium bisulfite(BASB) were increased over 120/kg. Remarkably increased dischargeability resulted from baking for 3 min or more at 160t after steaming for 8 min or more at $102^\circ{C}$, but 120g/kg or more amounts of $K_2CO_3$ and BASB(50%) had little influence on dischargeability. Therefore the discharge mechanism can be suggested that covalent bonds between cellulose and Bl-5 undergo $S_N2$ attack by hydroxide ion formed by the reaction of $K_2CO_3$ and water in steaming at $102^\circ{C}$ first and then, through transition states they are cleavaged in baking at 160t to yield hydrolyzed Bl-S and compounds of BASB and Bl-5 isolated from fiber, which are undyeable and removed by washing. The effect of urea, one of the hydrotrope agents, on discharge printing was also studied. The result which dischargeability was greatly improved by increasing the steaming time from 8 min to 15 min at $102^\circ{C}$ or by increasing the amount of urea obviously shows that water in steaming and urea in print paste play an important role in discharge printing. And as an increase of the baking time from 5 min to 7 min at $160^\circ{C}$ makes it possible to improve dischargeability, it is once more confirmed that high temperature of about 160t is exactly required to discharge the dyed Bl-5. The colored discharge printing demands a more amount of urea because urea contributes to the putting color fixation as well as the discharge reaction.