• 한국정밀공학회지
• /
• 제28권9호
• /
• pp.1040-1047
• /
• 2011

This paper proposes a novel method based on error back propagation neural networks to fuse laser sensor data and ultrasonic sensor data for enhancing the accuracy of mapping. For navigation of single robot, the robot has to know its initial position and accurate environment information around it. However, due to the inherent properties of sensors, each sensor has its own advantages and drawbacks. In our system, the robot equipped with seven ultrasonic sensors and a laser sensor navigates to map two different corridor environments. The experimental results show the effectiveness of the heterogeneous sensor fusion using an error backpropagation algorithm for mapping.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.996-1001
• /
• 1991

We consider the object recognition of industrial tools which have one degree of freedom. In the case of pliers, the shape varies as the jaw angle varies. Thus, a feature vector made from the boundary image also varies along with the jaw angle. But a pattern recognizer should have the ability of classifying objects without any regards to the angle variation. For a pattern recognizer we have utilized a backpropagation neural net. Feature vectors were made from Fourier descriptors of boundary images by truncating the high frequency components, and they were used as inputs to the neural net for training and recognition. In our experiments, backpropagation neural net outperforms the minimum distance rule which is widely used in the pattern recognition. The performance comparison also made under noisy environments.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.484-490
• /
• 2000

The abjective of the study is the development of the system for effective prediction of residual stresses using the backpropagation algorithm from the neural network. To achieve this goal, the series experiment were carried out and measured the residual stresses using the sectional method. Using the experimental results, the optional control algorithms using a neural network should be developed in order to reduce the effect of the external disturbances on during GMA welding processes. Then the results obtained from this study were compared between the measured and calculated results, the neural network based on backpropagation algorithm might be controlled weld quality. This system can not only help to understand the interaction between the process parameters and residual stress, but also improve the quantity control for welded structures.

• 한국전산구조공학회논문집
• /
• 제35권6호
• /
• pp.367-374
• /
• 2022

본 논문에서는 역전파 방법 기반 자동미분법을 이용하여 설계민감도를 구하고 이를 응력제한조건을 고려한 위상최적설계에 적용하였다. 응력제한조건이 있는 위상최적화문제는 특이점(singularity)과 응력의 국부성(local nature of stress constraint)문제, 그리고 설계 변수에 대한 비선형성의 문제를 포함하고 최적해를 얻기가 매우 힘들다. 특이점 문제를 해결하기 위해서 응력 완화(stress relaxation) 기법을 사용하였고, 응력의 국부성을 해결하기 위해 p-norm을 이용한 전역 응력치를 제한조건에 사용하였다. 설계 변수에 대한 비선 형성을 극복하기 위해 해석적인 방법으로 정확한 설계민감도를 구하는 것이 중요하다. 위상최적설계에서 기존에는 보조변수방법 (adjoint variable method)을 사용하여 빠르고 정확한 설계민감도를 구했지만, 설계민감도를 해석적으로 구해야 하고, 보조평형방정식을 추가로 풀어야 하는 어려움이 있다. 이를 해결하기 위해서 인공신경망에서 최적 가중치(weights)와 편차(biases)를 구할 때 쓰이는 역전파 기법을 이용하여 설계민감도를 구하고 이를 응력제한조건을 고려한 위상최적설계에 적용하였다. 역전파 기법은 자동미분에 쓰이는 기법으로 목적함수나 제한조건에 대한 설계민감도를 별도의 수식유도 없이 간단하게 구할 수 있는 장점이 있다. 또한, 미분값을 구하는 역전파의 과정이 보조평형방정식을 푸는 것보다 계산시간이 빠르고 해석적 방법으로 구한 설계민감도와 같은 정확도를 보여준다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.696-704
• /
• 1998

Artificial neural networks (ANN) have successfully applied into various areas. But, How to effectively established network is the one of the critical problem. This study will focus on this problem and try to extensively study. Firstly, four different learning algorithms ANNs were constructed. The learning algorithms include backpropagation, simulated annealing, genetic algorithm, and tabu search. The experimental results of the above four different learning algorithms were tested by statistical analysis. The training RMS, training time, and testing RMS were used as the comparison criteria.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(3)
• /
• pp.189-192
• /
• 2001

In this paper, we propose a ADALINE controller using fuzzy-backpropagation algorithm to adjust weight. In the proposed ADALINE controller, using fuzzy algorithm for traning neural network, controller make use of ADALINE due to simple and computing efficiency. This controller includes adaptive learning rate to accelerate teaming. It applies to servo-motor as an controlled process. And then it take a simulation for the position control, so the verify the usefulness of the proposed ADALINE controller.

• 전자공학회논문지B
• /
• 제31B권1호
• /
• pp.107-114
• /
• 1994

Hardware implementation of the on-chip learning artificial neural networks is important for real-time processing. A pRAM model is based on probabilistic firing of a biological neuron and can be implemented in the VLSI circuit with learning capability. We derive a backpropagation learning algorithm for the pRAM networks and present its circuit implementation with stochastic computation. The simulation results confirm the good convergence of the learning algorithm for the pRAM networks.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1285-1288
• /
• 1998

In this paper, we propose a new learning algorithm for multilayer neural networks. In the error backpropagation that is widely used for training multilayer neural networks, weights are adjusted to reduce the error function that is sum of squared error for all the neurons in the output layer of the network. In the proposed learning algorithm, we consider each output of the output layer as a function of weights and adjust the weights directly so that the output neurons produce the desired outputs. Experiments show that the proposed algorithm outperforms the backpropagation learning algorithm.

• Journal of the Korean Data and Information Science Society
• /
• 제7권1호
• /
• pp.13-19
• /
• 1996

In this paper, we study and compare two types of methods for classification when both continuous and categorical variables are used to describe each individual. One is neural network(NN) method using backpropagation learning(BPL). The other is logistic model(LM) method. Both the NN and LM are based on projections of the data in directions determined from interconnection weights.

• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.315-320
• /
• 2009

The purpose of this study is to predict the roundness of Numerical Control Machining so that helps the operator to choose the right machining conditions to produce a product within the given error limits. Learning of neural network is Backpropagation theory. From this study, the base was set to setup the database to produce precisely machined product by predicting the rate of error in the fabrication facility which does not have the environment to analyze it.