• Wind and Structures
• /
• 제20권3호
• /
• pp.449-468
• /
• 2015

Current wind-resistance designs of large-scale indirect dry cooling towers (IDCTs) exclude an important factor: the influence of the ventilation rate for radiator shutter on wind loads on the outer surfaces of the tower shell. More seemingly overlooked aspects are the effects of various ventilation rates on the wind pressure distribution on the tower surfaces of two IDCTs, and the feature of the flow field around them. In order to investigate the effects of the radiator shutter ventilation rates on the aerodynamic interference between IDCTs, this paper established the numerical wind tunnel model based on the Computational Fluid Dynamic (CFD) technology, and analyzed the influences of various radiator shutter ventilation rates on the aerodynamic loads acting upon a single and two extra-large IDCTs during building, installation, and operation stages. Through the comparison with the results of physical wind tunnel test and different design codes, the results indicated that: the influence of the ventilation rate on the flow field and shape coefficients on the outer surface of a single IDCT is weak, and the curve of mean shape coefficients is close to the reference curve provided by the current design code. In a two-tower combination, the ventilation rate significantly affects the downwind surface of the front tower and the upwind surface of the back tower, and the larger positive pressure shifts down along the upwind surface of the back tower as the ventilation rate increases. The ventilation rate significantly influences the drag force coefficient of the back tower in a two-tower combination, the drag force coefficient increases with the ventilation rate and reaches the maximum in a building status of full ventilation, and the maximum drag coefficient is 11% greater than that with complete closure.

• 한국지반공학회논문집
• /
• 제27권9호
• /
• pp.5-11
• /
• 2011

본 논문에서는 자연모래 2종(세사, 왕사)과 부순모래, 자갈 2종(10mm, 20mm)을 대상으로 실내시험을 통하여 입도 분포 특성, 마찰특성 및 토압특성 등 되메움 재료 별 이중보온관의 거동 특성을 평가하고, 합리적인 되메움 대체재료 제시를 위하여 기존 이중보온관 되메움재인 중사와 비교를 수행하였다. 연구결과에 따르면, 부순모래는 5종의 되메움 대체재료 별 평가결과 이중보온관에 미치는 공학적 특성 및 재료의 수급 측면에 있어 기존 중사를 이용하는 이중보온관 되메움재의 대체재료로 가장 합리적인 재료로 평가되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.482-483
• /
• 2009

In chemical mechanical planarization (CMP) process, the uniformity of stress acting on wafer surface is a key factor for uniform material removal of thin film especially in the oxide CMP. In this paper, we analyze the stress on the contact region between wafer and pad with finite-element analysis (FEA). The setting pressure acting on wafer back side was $500g/cm^2$ and the retainer pressure was changed from 300 to $700g/cm^2$. The polishing test is also done with the same conditions. The material removal rate profiles well-matched with stress distribution.

• 한국터널지하공간학회 논문집
• /
• 제17권4호
• /
• pp.429-440
• /
• 2015

본 연구에서는 배수형 쉴드터널 적용시 작용수압의 저감을 평가하기 위해 모형실험장치를 개발하여 배수 및 비배수 조건에서 작용수압 차이를 실험하였다. 모형실험 결과 배수 조건에서 간극수압 증가율이 감소하는 경향을 보였고, 비배수 조건에 비해 전응력이 더 작게 나타나 모형터널 내 지하수 유입에 의해 작용수압이 저감되는 것으로 나타났다. 현장계측 결과 쉴드터널 배면 지반 내 작용수압은 지하수위로 계산되는 수압($r_w{\cdot}H$)보다 약 11~22%정도 적게 나타났다. 모형실험 및 현장계측 결과에서 배수 및 비배수 조건의 이론적인 설계수압과 작용수압의 차이가 나타났는데, 배수형 쉴드터널 적용시 기존 설계수압보다 감소된 수압을 적용하는 것이 가능할 것으로 판단되며, 수압 감소를 통해 세그먼트 단면 축소도 가능할 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.424-433
• /
• 2006

This paper studies the field applicability of the Special Chemical grouting Method(SCM) in reinforcing and reducing permeability of the back of an existing continuous wall. SCM uses double rod which imposes intermediate pressure$(981\sim9,810kPa)$ to disturb, cut, discharge, and mix the ground. It is observed that a bulb is formed by using cement paste and environmentally friendly injection materials with minimal alkali leaching. Uniaxial compression tests, test for chemical properties and fish poison test are performed. Test results indicate that the method results in higher durability, less leaching through use of the environmentally friendly injection material, and faster mobilization of the strength. In addition, field tests confirm the formation of the bulb and the seepage cutoff wall.

• 한국지반공학회논문집
• /
• 제22권12호
• /
• pp.25-31
• /
• 2006

본 논문에서는 주열식말뚝 배면의 차수를 목적으로 쓰이는 SCM공법의 지반강도와 투수계수 개선 효과를 연구하였다. SCM공법은 2중관 롯드를 사용하여 중압($981{\sim}9,810kPa$)으로 지반을 절삭하고 충전 및 혼합하는 공법이다. 이는 시멘트와 알카리용탈이 최소화된 친환경적인 약액을 사용하는 것으로 실험을 통하여 입증하였다. 1축압축시험, 어독성시험 등을 통하여 화학적인 안정성을 실험하였고, 그 결과 내구성이 높고 조기강도 발현이 되며 알칼리용탈이 최소화된 친환경적인 약액재료임을 입증하였다. 그리고 현장시험을 통하여 구근과 차수벽이 형성됨을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1206-1215
• /
• 2008

In this study, the equivalent pressure acting on the face of drilled hole was determined by back analysis. This analysis was continued until the difference between the displacement directly measured during field test construction of CGS and the displacement evaluated by numerical analysis was below 10 percent, and the affect of diaphragm wall adjacent to grout bulb was evaluated by numerical analysis using the equivalent pressure. From the analysis results, it was observed that the increase of the pressure acting on the diaphragm wall was greater at reclaimed sandfill layer than silty clay layer during the installation of CGS. Two methods were adopted to reduce the pressure acting on the diaphragm wall. One is installing of trench between diaphragm wall and grout bulb, the other is pre-installing of CGS before construction of diaphragm wall. From the numerical analysis results, above two methods can be considered as an effective method to reduce the pressure. It was analyzed that the amount of reduction of the pressure and the displacement are 689.8% and 564.6%, respectively, in the case of adopting the trench method, and 463.7% and 214.0%, respectively, in the case of adopting pre-installing of 3 columns CGS.

• 한국전문물리치료학회지
• /
• 제29권2호
• /
• pp.156-164
• /
• 2022

Background: Low back pain (LBP) is a representative disease, and LBP is characterized by muscle dysfunction that provides stability to the lumbar spine. This causes physical functional problems such as decreased posture control ability by reducing the muscular endurance and balance of the lumbar spine. Pelvic compression using instruments, which has been used during recent stabilization exercises, focuses on the anterior superior iliac spine of the pelvis and puts pressure on the sacroiliac joint during exercise, making the pelvis more symmetrical and stable. Currently, research has been actively conducted on the use of pelvic compression belts and non-elastic pelvic belts; however, few studies have conducted research on the application effect of pelvic compression using instruments. Objects: This study aimed to investigate whether there is a difference in trunk muscular endurance and dynamic and static balance ability levels by applying pelvic stabilization through a pelvic compression device between the LBP group and the non-LBP group. Methods: Thirty-nine subjects currently enrolled in Daejeon University were divided into 20 subjects with LBP group and 19 subjects without LBP (NLBP group), and the groups were compared with and without pelvic compression. The trunk muscular endurance test was performed with 4 movements, the dynamic balance test was performed using a Y-balance test, and the static balance test was performed using a Wii balance board. Results: There was a significant difference the LBP group and the NLBP group after pelvic compression was applied to all tests (p < 0.05). In the static and dynamic balance ability test after pelvic compression was applied, there was a significant difference in the LBP group than in the NLBP group (p < 0.05). Conclusion: These results show that pelvic compression using instruments has a positive effect on both those with and without LBP and that it has a greater impact on balance ability when applied to those with LBP.

• 국제물리치료학회지
• /
• 제11권4호
• /
• pp.2253-2260
• /
• 2020

Background: Patients with low back pain (LBP) experience misalignments in the center of pressure (COP) and muscle imbalances due to frequent onesided posture adjustments to avoid pain. Objectives: To identify the effects of Squat Exercises with Vertical Whole-Body Vibration on the Center of Pressure and Trunk Muscle Activity. Design: Randomized controlled trial. Methods: Thirty LBP patients with an imbalance in the COP were sampled and randomly assigned to an experimental group of 15 patients who under went an intervention involving squat exercises with vertical WBV and a control group of 15 patients who were treated via a walking intervention. As pretests before the interventions, the subjects' COP was identified by measuring their stability index (ST), and erector spinae, rectus abdominis, transverse abdominis, gluteus medius muscle activity was analyzed by determining the % reference voluntary contraction (%RVC) value using surface electromyography while sit to stand. After four weeks, a post test was conducted to remeasure the same variables using the same methods. Results: Statistically significant differences were found in the ST (P<.01) and trunk muscle (P<.05, P<.001) in the experimental group before and after the intervention. In terms of the differences between the left- and right-side (RL) muscle activity, only the transverse abdominis (TrA) and gluteus medius (GM) exhibited statistically significant increase (P<.05). A comparison of the groups showed statistically significant differences in the TrA with respect to muscle activity (P<.05) and in the RLTrA and RLGM in terms ofthe difference between left- and right-side muscle activity (P<.01). Conclusion: Squat exercises with vertical WBV produced effective changes in the COP of patients with LBP by reducing muscle imbalances through the delivery of a uniform force. In particular, strengthening the TrA and reducing an imbalance in the GM were determined to be important factors in improving the COP.

• Journal of Biosystems Engineering
• /
• 제14권4호
• /
• pp.272-281
• /
• 1989

It is desirable for the vertical wind tunnel which can build uniform air flow across the vertical duct to be used for the purpose of the investigation of the aerodynamic properties of grains. This study was conducted to examine how the air velocity profile in the vertical duct is influenced by the various alternations of the elements of the wind tunnel, and to prepare design guidance of the vertical wind tunnel which can be used for investigating aerodynamic properties of grains. In addition, several tests were conducted to locate the test section which can be applicable for determining the terminal velocity of grain. The following conclusions were obtained from the study: 1. The size and the location of the outlet of the plenum chamber should be determined such that the outlet air flow is less affected by the air flow and the back pressure by the side wall of the chamber. 2. The honeycomb was not helpful for attaining uniform air flow in case that the air flow profile at the bottom of the vertical duct is serverely different from the ideal one. 3. Even though considerable pressure drop was resulted from the screens installed within the vertical duct, the screens were helpful for attaining uniform air flow in the duct. 4. It is desirable for the test section to be located at the position that not only the air flow of the duct is not disturbed by the distorted back pressure in the plenum chamber, but also less boundary layer is developed.