• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.251-251
• /
• 2007

A new type of a lead-free positive temperature coefficient of resistivity(PTCR) material. based on $(Bi_{1/2}Na_{1/2})TiO_3\;-\;BaTiO_3$ solid solution ceramics has been developed. The effect of $Nb_O_5$ and $Y_2O_3$ content on the electrical properties and the microstructure of (1-x) $(Bi_{1/2}Na_{1/2})TiO_3\;-\;x\;BaTiO_3$ (BNBT) ceramics made using a conventional mixed oxide process has been studied. The Curie Temperature was obviously increased with the increasing of $(B_{0.5}Na_{0.5})TiO_3$ content. The Y-doped BNBT ceramics(x=0.02) display low resistivity values of $10^2-10^3$ ohm*cm at room temperature and the Curie Temperature of $Tc=155^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.653-656
• /
• 1999

Effect of $Al_2O_3$ Additives on Microwave Dielectric Properties of $0.15(Ba_{0.85}Ca_{(0.15-y)}Mg_y)$-0.125 $Nd_2O_3-0.60TiO_2+10wt%Bi_zO_3$ (y=0.05, 0.08) Ceramics was investigated. To control of $\tau\;{f}$ on microwave dielectric properties of $0.15(Ba_{0.85}Ca_{(0.15-y)}Mg_y)$-0.125 $Nd_2O_3-0.60TiO_2+10wt%Bi_zO_3$ ceramics $Al_2O_3$ was doped in the composition range of 0 to 0.15 wt%. As a result, dielectric constant was decreased from 94 to 80 but $Q\cdot{f}_0$ value was increased from 4980 to 5210 GHz and temperature coefficient of resonant frequency can be controlled from +9 to -10$ppm^\circ{C}$ as an increase of$Al_2O_3$ doping concentration. Especially, a new microwave dielectric material having $\varepsilon\;_r=84,\;Q\cdot{f}_0=5120\;GHz\;and\;\tau_f=0\;ppm/^\circ{C}$ was obtained at $Al_2O_3$ doping concentration of 0.08 wt%.

• 한국결정성장학회지
• /
• 제20권1호
• /
• pp.25-29
• /
• 2010

페로브스카이트 구조를 갖고 $Tm_2O_3$가 첨가된 MLCC용 $BaTiO_3$ 유전체를 제조하기 위하여 환원분위기, $1320^{\circ}C$의 온도조건에서 2시간 동안 소결하였다. 유전특성 측정과 미세구조 관찰을 통하여, $Tm_2O_3$ 첨가에 따라 $BaTiO_3$ 세라믹의 유전특성에 미치는 영향에 대해 연구하였으며 각 유전체의 상분석을 통하여 이차상 유무를 확인하였다. 1 mol%의 $Tm_2O_3$를 첨가한 유전체 시편이 유전특성이 가장 우수한 반면에 2 mol% 이상의 $Tm_2O_3$를 첨가한 시편의 유전상수는 1 mol%를 첨가한 시편에 비해 낮은 값을 보였다. 유전특성에 영향을 미치는 grain 크기 및 pyrochlore 이차상 형성은 미세구조분석과 결정구조분석에 의해 조사되었다. 또한, 이들 데이터를 대표적 희토류인 $Er_2O_3$를 첨가한 유전체 시편과 비교하였고 유전특성과 관련이 있는 pyrochlore상의 형성을 상분석으로써 확인하였으며 이 결과는 세라믹 커패시터의 유전특성이 도핑에 따른 이차상과 $BaTiO_3$ tetragonality의 변화와 관련되어있다고 판단된다.

• 한국세라믹학회지
• /
• 제18권2호
• /
• pp.119-125
• /
• 1981

The thermostable resistor was made by using P.T.C.R-N.T.C.R. ceramics. In this study $BaTiO_3$ type P.T.C.R. ceramics and $SnO_2-Sb_2O_3$ type N.T.C.R. ceramics were cocrystallized in one body and electrical resistance was stable under the temperature variation between $25^{\circ}C$-40$0^{\circ}C$. The ceramics showed the most stable electrical resistance for the mal variation when the composition was 0.6P.T.C.R. $BaTiO_3$,$ 0.4SnO_2$ and 0.01 $Sb_2O_3$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.33-34
• /
• 2008

Barium titanate (BaTiO3) is one of the most important dielectric materials for the electronic devices, such as MLCC (Multilayer Ceramic Capacitor). The thickness of the dielectric thin film in MLCC has become thinner and reached about 0.8 ${\mu}m$. Further down sizing is required for the higher performance. For this reason, we should take into account for the size effect of Barium titanate powders. In this study, we demonstrated that size effect for BaTiO3 (0.2 ~ 0.5 ${\mu}m$, hydrothermal BT) could be estimates by using dielectric properties analysis together with the powder properties.

• 한국세라믹학회지
• /
• 제31권6호
• /
• pp.587-594
• /
• 1994

(Ba, Sr)TiO3-based PTCR ceramics were sintered and cooled down with various cooling conditions in the air. AES was applied to investigate the composition change in the grain boundary and bulk area of oxidatively cooled samples. Ba component was deficit in grain boundary region, while oxygen was abundant than bulk region. The discrete changes of oxygen binding energies were confirmed in the grain boundary region of the heavily oxidized samples. It was supposed that the large binding energy shift resulted from the oxidation of the segregated Mn in grain boundary region and this idea was supported by the DV-X$\alpha$ molecular energy simulation.

• 대한전기학회논문지
• /
• 제43권5호
• /
• pp.789-794
• /
• 1994

In this study, the structural and microwave dilelectric properties of 0.15BaO-0.15SmS12TOSI3T-0.7TiOS12T ceramics with sintering and annealing conditions were investigated. In the specimen sintered at 1350 [$^{\circ}C$], dielectric constant and quality factor were good values of 80.19,2006 (fS10T=4.6851[GHz]). To improve the $\tau$S1fT of specimen which was manufactured by the optimumsintering condition (1350[$^{\circ}C$],2[Hr.]), annealed from 2[hr.] to 16[hr.] at the annealing temperature of 1200 [$^{\circ}C$]. Increasing the annealing time, dielectric constant was almost constant and quality factor was increased. In the specimen of 4[hr.] annealed, the temperature coefficient of resonant frequency was minimum value, and increased with increasing the annealing time.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권2호
• /
• pp.190-195
• /
• 1995

Temperature dependences of the dielectric constant K(T), remanent polarization $P_{r}$, (T), effective birefringence overbar .DELTA.n(T), transmitted light intensity and quadratic electro optic coefficient R(T) of the two-stage sintered xBa(L $a_{1}$2/N $b_{1}$2/) $O_{3}$-(1-x)Pb(Z $r_{y}$ $Ti_{1-y}$) $O_{3}$(x=0.085, 0.09, 0.40.leq.y.leq.0.70) ceramics were investigated. Increasing the PbZr $O_{3}$ contents, the crystal structure of a specimen was changed from a tetragonal phase to a rhombohedral and cubic phase, and the phase transition was showed a diffuse phase transition(DPT) characteristics. In the compositions which located on the PE-FE phase boundary, the discrepancy was observed between the Curie temperature and temperature which a microscopic polarization and effective birefringence were disappeared.red.d.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.374-378
• /
• 1999

Thin Films of BaYTiO system were Prepared by frequency (rf)/dc magnetron sputtering method. The preparation of target were accomplished by the mixed oxide method, and their composition consisted of the $Ba_{0.997}$ $Y_{0.003}$Ti $O_3$+0.5 $SiO_2$+x $M_{n}$O(x=0, 0.073, 0.1, 0.127, 0.154). The average particle size of (Ba,Y)Ti $O_2$ system ceramics with Mn $O_2$ additives increases as the amount of MnO additives increase and reaches the maximum grain growth when the amount of MnO is 0.127(mol%).).).).

• 한국세라믹학회지
• /
• 제28권9호
• /
• pp.689-695
• /
• 1991

Dielectric properties of Ba1-$\chi$Sr$\chi$Ti1-yCayO3-y ceramics, where Sr and Ca were doped to Ba-site and Ti-site within the range of 0 x 0.24 and 0 y 0.05, respectively, were investigated. The substitution of Ca for Ti, which maintained the high resistivity of these formulations after sintering in a reducing atmosphere, was confirmed. Ca addition decreased the tetragonality c/a, increased the unit cell volume, and lowered Curie temperature, which were attributed to the occupancy of Ca2+ ions on Ti-sites. The lowering of Curie temperature by Ca addition was affected by the substitution of Sr for Ba-site; within 2 mol% of Ca, Curie temperature was lowered at a rate of 2$0^{\circ}C$ and 16$^{\circ}C$ per mol% of Ca at x=0 and x=0.08, respectively. Whereas the resistivity of the formulations without Ca was reduced to 107 {{{{ OMEGA }}cm, when sintered at low oxygen partial pressure of 10-9 MPa, the resistivity value higher than 1011 {{{{ OMEGA }}cm was maintained for the formulations containing Ca more than 0.5 mol%. Dielectric loss factor, tan$\delta$, was about 1% for most formulations.