• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.4
• /
• pp.241-244
• /
• 2004

Protein A molecular thin film was fabricated as a platform of antibody-based biosensor. For the immobilization of the protein A thin film, a viologen multilayer was built up using the Langmuir-Blodgett (LB) technique, and then, protein A was adsorbed on the viologen LB film by an electrostatic interaction force, which was formed as a hetero-film structure. For the deposition of viologen, surface pressure area ($\pi$-A) isotherm was investigated. The fabricated protein A-viologen hetero LB film was investigated using atomic force microscopy (AFM). Using the developed molecular film, antibody immobilization and fluorescence measurement was carried out.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.757-766
• /
• 1990

In this paper a new knowledge based vision system using orientation information on each surface of the 3-dimensional object is discussed. The measurement of the orientation information is performed by photometric stereo method. And then the obtained orientations are segmented using Gaussian curvature and mean curvature. A hierarchical knowledge base which is based on the characteristics, shape, area and length of the surface is built up, and then the knowledge based system infers by the condition interprete system (CIS). As the results, an easier and more accurate 3-D object recognition system is implemented, because it uses the characteristics and shapes as units of the surface in the recognition process.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.1
• /
• pp.13-20
• /
• 1999

Not only is it important that the physical properties of the paperboards be appropriate for the intended end use, but the proper arrangement of the component in the built-up board is essential for attaining the optimum moment of inertia and the maximum load-carrying ability in a box. It is known to be impossible to estimate the stress distribution and deflection pattern by experiments or theoretical analysis when the corrugated fiberboard get the bending force. This study was tried theoretical and finite element analysis to analyze structural strength characteristics of corrugated fiberboards. If the linerboard and corrugating medium of every corrugated fiberboards is made from the same material, the location of neutral axis comes close to inside liner in order of DMA, DM, DMB, SW and DW, and moment of inertia of area decreases in order of DMA, DMB, DW, DM and SW. With the finite element analysis, deflection of applied loads represented SW, DM, DMA, and TW in the order of their value.

• Korean Journal of Rural Living Science
• /
• v.5 no.1
• /
• pp.19-29
• /
• 1994

The purpose of this dissertation is to develop a tool for enviromental evaluation which measures a level of physical quality in renovated rural houses and to find out the physical environment conditions of the renovated houses in rural area. To achieve these purposes, criteria for the evaluation of physical environment were built up based on practical knowledge which have been found in books and through the fold survey. Elements of evaluation tool consists of Safety, Health, Efficiency that are basic elements in the Hygienic Quality of Housing in WHO. As a results of this study, a three-level of physical environments suggested that a basic level, a inductive level and a proper measure level in renovated rural houses.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.555-559
• /
• 1998

The human chromosome analysis is widely used to diagnose genetic disease and various congenital anomalies. Many researches on automated chromosome karyotype analysis have been carried out, some of which produced commercial systems. However, there still remains much room for improving the accuracy of chromosome classification. In this paper, We proposed an optimal pattern classifier by neural network to improve the accuracy of chromosome classification. The proposed pattern classifier was built up of two-step multi-layer neural network(TMANN). We reconstructed chromosome image to improve the chromosome classification accuracy and extracted four morphological features parameters such as centromeric index (C.I.), relative length ratio(R.L.), relative area ratio(R.A.) and chromosome length(C.L.). These Parameters employed as input in neural network by preprocessing twenty human chromosome images. The experiment results shown that the chromosome classification error was reduced much more than that of the other classification methods.

• Journal of Conservation Science
• /
• v.1 no.1 s.1
• /
• pp.40-59
• /
• 1992

Stone-monuments, distributed in this area, have been investigated and studied in geological and conservational points of view. They are seemed to have been built from the Shilla to Koryeo Kingdoms, although more systematic studies are needed. The used rocks in these monuments are mainly biotite granite of Jurassic age. They are strongly weathered and partly exfoliated along igneous lineation about 1-2 mm(maximum up to 5 mm). They are mainly effected by chemical weathering to be selectively dissolved and by various kind of moss. For conservation, it must be scientifically considered based on characteristics and kind of rock phase, factors on weathering process, situation and protection.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.3
• /
• pp.11-20
• /
• 2011

The present age demands a change in attitude based on a differentiated life value from city. It will provide to a fundamental solution for the gap of living level in the farming and fishing communities and recreate distinguishing comfortable communities. The purpose of this study was to deduct the formation characteristics of the townscape of Korean slow city according to analyze resources and structure of landscape. Planning of slow city's townscape is a process of imagification of filtrate unique meaning. The glob share synchronic unique values by slow city's network. Therefore instead of putting emphasis on promoting tourist business for short-term revenue, it will be under control to raise the standard of living and to be not forfeited and diluted the rights for sustainable slow city's status. Participation of resident needs in this process. Accordingly it need a strategy of landscape formation design and a interdepartmental practice system for a continuous slow city's image by renewal of disharmonious townscape in the built-up area.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.8
• /
• pp.678-687
• /
• 2005

This paper describes a relative localization algorithm using odometry data and consecutive local maps. The purpose of this paper is the odometry error correction using the area matching of two consecutive local maps. The local map is built up using a sensor module with dual laser beams and USB camera. The range data form the sensor module is measured using the structured lighting technique (active stereo method). The advantage in using the sensor module is to be able to get a local map at once within the camera view angle. With this advantage, we propose the AVS (Aligned View Sector) matching algorithm for. correction of the pose error (translational and rotational error). In order to evaluate the proposed algorithm, experiments are performed in real environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.46.5-46
• /
• 2001

Electrostrictive polymer is deformed by electric force generated by electric field built by high voltage. When high voltage is applied to the electrostrictive polymer film in which the electrodes such as conductive grease or carbon powder are installed, it expands in the direction of area. Because electrostrictive polymer is incompressible and electric force is applied to it in the direction of thickness. Electrostrictive polymer film in which electrodes are installed, functions as a parallel-plate capacitor. Therefore anode and cathode charges are piled up or both electrodes and there exists attractive force that functions as pressure in the direction of thickness. So the thickness of electrostrictive polymer becomes thicker ...

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3962-3973
• /
• 2022

Several critical heat flux (CHF) correlations including the look-up table in the MARS code have been assessed for the prediction of CHF in a downward-flow narrow rectangular channel. For the assessment, we built an experiment database that covers pressures between 1.01 and 39.0 bar, gap sizes between 1.09 and 6.53 mm, mass fluxes up to 25,772 kg/m²s, and under one-sided and two-sided heating conditions. The results of the assessment showed that the Kaminaga correlation has the best overall prediction compared to others. However, because the correlation uses global variables, such as inlet and outlet subcooling and total heat transfer area, it is difficult to use in a system code. A new CHF correlation is then proposed by replacing the global variables in the Kaminaga correlation with local ones and adding correction factors to consider the effect of gap size, mass flux, and the number of heating walls. Additional correction factor is added to consider the effect of inlet subcooling. It is shown that the new one is better than the Kaminaga correlation and it is easy to implement to any system code.