• Applied Biological Chemistry
• /
• v.34 no.2
• /
• pp.86-93
• /
• 1991

cis-Diamminedichloroplatinum(II)(CDDP), an antitumor drug, did not generate crosslink between bluetongue virus (BTV) capsid protein at moderate concentration. Cesium chloride density gradient centrifugation study revealed that protein-RNA crosslink was not detectable in CDDP treated BTV. CDDP treated BTV ds RNA showed remarkable change in the migration pattern in polyacrylamide gel electrophoresis. These results suggest that the reduction of BTV core associated transcriptase activity is most likely by the CDDP adduction to the genomic ds RNA rather than by the protein-RNA crosslink and/or protein-protein cross-link.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.105-112
• /
• 2009

The greenhouse whitefly, Trialeurodes vaporariorum (Westwood) and the sweet potato whitefly, Bemisia tabaci (Gennadius) are serious insect pests that have a wide host range including cucumber, tomato, and pepper. In this study, we tested larvicidal efficacy of several on-the-market environment-friendly agricultural materials (EFAM) to select the effective products after the target pests were stabilized in indoor rearing condition. The developmental periods of two whiteflies are as follows: in the case of T. vaporariorum, egg duration is 9.6 days and nymph is 18.9 days, and in the case of B. tabaci, egg duration is 7.4 days and nymph is 15.2 days under $25^{\circ}C$ with relative humidity (RH) of $60{\pm}5%$ and a photoperiod of 16 L:8D. The total period of T. vaporariorum was 5 days longer than B. tabaci. Among 22 EFAMs six products showed more than 60% of insecticide efficacy against T. vaporariorum BTV B, BTV D, BTV G, BTV L, BTV M, and BTV S. On the other hand, seven EFAM products showed over 60% of insecticide efficacy against B. tabaci BTV D, BTV G, BTV K, BTV L, BTV M, BTV N, and BTV U. In the case of Spodptera litura previously, 16 EFAMs were tested against $2^{nd}$ instar S. litura, and six EFAMs were found to have more than 90% efficacy. Test of these six EFAMs against entire larval stages were performed in this study. Although some of these products showed still more than 90% of insecticidal efficacy against up to $3^{rd}$ instar larvae, the efficacy of these EFAMs sharply decreased as ages increase, resulting in less than 60% of efficacy of the products at most. This result indicates the difficulty to control S. litura with the on-the-market EFAMs alone under economic injury level. Collectively, it is required to find more EFAMs, and find alternative method, and combined way of controlling to control those insect pests tested in this study.

• Korean Journal of Microbiology
• /
• v.29 no.1
• /
• pp.34-39
• /
• 1991

The BTV core associated transcriptase activity, assayed by acid precipitable counts, was reduced to an undetectable level after treat the core with .$100{\mu}{\M}$ CDDP. When the RNA transcripts prepared from the CDDP treated BTV core were analysed on agaroseurea gel, it was observed that the band intensity of the large size RNA was reduced while the band intensity of the small size RNA was enhanced. Northern blot analysis showed that much of the small size RNAs appeared to be prematurely terminated transcripts. These results suggest that CDDP adduction to the template RNA blocks chain elongation process of the virion bound transcriptase that is ultimately responsible for the inactivation of BTV infectivity.

• Journal of Veterinary Clinics
• /
• v.27 no.4
• /
• pp.421-426
• /
• 2010

In view of free from bluetongue (BT) in the domestic cattle population in Korea, the key of quarantine testing for BT virus (BTV) infection is detection of cattle previously exposed to the virus. The objective of this study was to estimate the probability of detecting a cattle infected with BTV using a stochastic modeling analysis of existing quarantine testing data. Three testing scenarios were considered in this study: serological testing of all animals in all imported lots (scenario 1), serological testing of a sample of cattle from all imported lots (scenario 2), and serological testing of 50% of imported lots (scenario 3). In scenario 2 and 3, it was assumed that cattle were sampled (sample size) within each lot to detect 5% of the cattle in each lot with a 95% confidence, taking into account diagnostic sensitivity of the ELISA (enzyme-linked immunosorbent assay). The model output was the total number of BTV-infected cattle and the prevalence of BTV infection in imported cattle from the US, Australia, Canada and Japan. Compared to the scenario 1, the probability of detecting a BTV-infected cattle was estimated to be 19% and 1.6% in scenario 2 and 3, respectively. Furthermore, the analyses showed a 95% confidence that BTV prevalence was less or equal to $9.7{\times}10^{-4}$ (median = $1.5{\times}10^{-5}$), indicating that, for the scenario 2 and 3 with serological testing for a sample of cattle, the risk of introducing an exotic strain of BTV into Korea through the importation of live cattle would not be acceptable.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1213-1218
• /
• 2007

The brake judder comes from non-uniformities in the tire/wheel assembly caused by mechanical effects such as a brake torque variation (BTV). A disc thickness variation (DTV) related with the kinematic behavior of the disc was investigated a main source of BTV. In this study, a dynamic model with brake corner assembly of full vehicle using MSC.ADAMS was correlated by experiment of judder phenomenon. Judder was generated and correlated systematically by judder experiment in chassis and brake dynamometer from variation in the thickness of the disc. Also it has been found a judder transfer path and variation of the braking pressure. Through analysis of transfer function and movement of subsystem caused by BTV generation, design parameters have been found. Based on the results obtained from parameter study of suspension module, the effective design process and developed model with brake corner assembly was suggested for vibration reduction of steering wheel caused by the judder phenomenon.

• Korean Journal of Materials Research
• /
• v.11 no.11
• /
• pp.960-964
• /
• 2001

$Bi_{3.99}Ti_{2.97}V_{0.03}O_{12}$ (BTV) thin films with 3 mol% vanadium doping were Prepared on $Pt/Ti/SiO_2/Si$ substrate by sol-gel method. X-ray diffraction analysis indicated that single-phase layered perovskite were obtained and preferred orientation was not observed. Under the annealing temperature at $600^{\circ}C$, the surface morphology of the BTV thin films had fine-rounded particles and then changed plate-like at $650^{\circ}C$ and $700^{\circ}C$. The remanent polarization $(2P_r)$ and coercive field $(2E_c)$ of $700^{\circ}C$ annealed BTV thin film were 25 $\mu$C/cm$^2$ and 116 kV/cm, respectively. In addition, BTV thin film showed little polarization fatigue during $10_9$ switching cycles. These improved ferroelectric properties were attributed to the increased rattling space and reduced oxygen vacancies by substitution $Ti^{4+}$ ion (68 pm) with smaller $V^{5+}$ ion (59 pm). The dielectric constant and loss were measured 130 and 0.03 at 10 kHz, respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.4
• /
• pp.148-156
• /
• 2001

Brake judder, one of low Sequency vibrations in brake system is determined by the excitation of Brake Torque Variation (BTV). The largest contributor to BTV is disc thickness variation. In this study, the static loads of brake torque at Suspension Mounting Points (SW) are obtained by the quasi-static analysis using DADS. The dynamic loads with frequency of BTV at SW are derived from correlation between forced vibration analysis with static loads and brake test results. And the accelerations at steering wheel were analyzed by forced vibration analysis with dynamic loads using commercial finite element program MSC/NASTRAN so that vibration characteristics of vehicle due to brake judder were investigated. Reliability of analysis results was verified through comparing the brake test results. Also, a parametric study with natural frequencies of frame, such as the 1st torsional mode and 1st bending mode, was conducted to reduce vibration amplitudes. As a result we could detect frame natural frequency conditions to improve vibration characteristics and obtained the frame model to reduce vibration amplitude.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.5
• /
• pp.338-345
• /
• 2002

The study presents a new testing and analysis method for brake judder on vehicle. For the identification of the excitation mechanism of a brake judder, it is necessary to measure the dynamic brake disc geometry during braking on vehicle. The non-contact sensor system was used to monitor the brake disc geometry. Brake torque variation (BTV) caused by disc thickness variation (DTV) is the primary excitation for brake judder. The mechanical effects generating BTV are linked not only to initial manufacturing tolerances but also to uneven wear. Therefore, the brake disc geometry should be strictly managed to initial condition. The aim of this study has been to measure the dynamic DTV and runout on vehicle and analyze the influence of test parameters on brake judder and compare the disc component with vehicle matching about the DTV Profile. As a result of this study, The amplitude of brake judder is proportional to vehicle speed and fluid pressure fluctuation on braking. The major sources of brake judder are directly related to disc thickness variation and side runout variation of corner assembly (disc, hub. bearing).

• Korean Journal of Microbiology
• /
• v.29 no.4
• /
• pp.221-225
• /
• 1991

The RNA transcripts produced from in vitro transcription reaction of BTV core were analyzed on agarose-urea gel. Fast migrating abortive RNAs, in addition to full length species of RNA, were observed. Fast migrating RNAs extracted from agarose-urea gel were hybridized to all 10 segments of genomic ds RNA, while solw migrating RNAs extracted from agarose-urea gel were hybridized only to the large and medium size genomic ds RNA. These results indicate that fast migrating RNA transcripts are most likely the products of abortive transcription.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.69-75
• /
• 2012

This paper presents a novel de-interlacing algorithm that can make up motion compensation errors by using maximum a posteriori (MAP) estimator. First, a proper registration is performed between a current field and its adjacent fields, and the progressive frame corresponding to the current field is found via MAP estimator based on the computed registration information. Here, in order to obtain a stable solution, well-known bilateral total variation (BTV)-based regularization is employed. Next, so-called feathering artifacts are detected on a block basis effectively. So, edge-directional interpolation is applied to the pixels where feathering artifact may happen, instead of the above-mentioned temporal de-interlacing. Experimental results show that the PSNR of the proposed algorithm is on average 4dB higher than that of previous studies and provides the better subjective quality than the previous works.